Viktor Mechtcherine 
- (2024): Deformation behaviour of 3D-printed concrete elements induced by plastic shrinkage. In: Construction and Building Materials, v. 449 (Oktober 2024).
- (2024): Automated manufacturing of reinforced modules of segmented shells based on 3D printing with strain-hardening cementitious composites. In: Automation in Construction, v. 166 (Oktober 2024).
- (2024): Chemical prestressing of concrete thin plates reinforced with mineral-impregnated carbon fibre (MCF) composites. In: Engineering Structures, v. 317 (Oktober 2024).
- (2024): Additive Fertigung mit Beton – Leitfaden für die Planung und die Durchführung von Projekten. In: Beton- und Stahlbetonbau, v. 119, n. 4 (Februar 2024).
- (2022): Beiträge zur Nachhaltigkeit im Betonbau. In: Beton- und Stahlbetonbau, v. 117, n. 4 (April 2022).
- (2023): Ballistic limit and damage assessment of hybrid fibre-reinforced cementitious thin composite plates under impact loading. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Bio-Inspired Impregnations of Carbon Rovings for Tailored Bond Behavior in Carbon Fiber Reinforced Concrete. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): Article of RILEM TC 292-MCC: life cycle assessment (LCA) of non-metallic reinforcement for reinforcing concrete: manufacturing, durability, dismantling, recycling and reuse: a review. In: Materials and Structures, v. 56, n. 7 (10 August 2023).
- (2018): Changes in concrete properties during pumping and formation of lubricating material under pressure. In: Cement and Concrete Research, v. 108 (Juni 2018).
- (2009): Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 1: Mechanism of fibre pull-out creep. In: Cement and Concrete Research, v. 39, n. 9 (September 2009).
- (2009): Characterising the time-dependant behaviour on the single fibre level of SHCC: Part 2: The rate effects on fibre pull-out tests. In: Cement and Concrete Research, v. 39, n. 9 (September 2009).
- (2012): Coupled strain rate and temperature effects on the tensile behavior of strain-hardening cement-based composites (SHCC) with PVA fibers. In: Cement and Concrete Research, v. 42, n. 11 (November 2012).
- (2022): Design and optimization of free-form surfaces for modular concrete 3D printing. In: Automation in Construction, v. 141 (September 2022).
- (2008): Constitutive modelling of high strength / high performance concrete. fédération internationale du béton (fib), Lausanne (Schweiz), ISBN 9782883940826.
- (2013): Code-type models for structural behaviour of concrete. fédération internationale du béton (fib), Lausanne (Schweiz), ISBN 9782883941106.
- (2022): 3D‐gedruckte monolithische Stahlbetonwände im CONPrint3D‐reinforced Verfahren. In: Beton- und Stahlbetonbau, v. 117, n. 4 (April 2022).
- (2021): Dielectric material characterization of concrete in GHz range in dependence on pore volume and water content. In: Construction and Building Materials, v. 311 (Dezember 2021).
- (2021): 3D-printing with foam concrete: From material design and testing to application and sustainability. In: Journal of Building Engineering, v. 43 (November 2021).
- (2021): Application of super absorbent polymers (SAP) in concrete construction—update of RILEM state-of-the-art report. In: Materials and Structures, v. 54, n. 2 (23 Februar 2021).
- (2019): CONPrint3D Ultralight – Herstellung monolithischer, tragender, wärmedämmender Wandkonstruktionen durch additive Fertigung mit Schaumbeton/Production of monolithic, load-bearing, heat-insulating wall structures by additive manufacturing with foam concrete. In: Bauingenieur, v. 94, n. 11 (November 2019).
- (2020): 3D‐Druck mit Carbonbeton: Technologie und die ersten Untersuchungsergebnisse. In: Beton- und Stahlbetonbau, v. 115, n. 12 (August 2020).
- (2018): 3D-printed steel reinforcement for digital concrete construction – Manufacture, mechanical properties and bond behaviour. In: Construction and Building Materials, v. 179 (August 2018).
- (2019): Beton-3D-Druck durch selektive Ablage. Anforderungen an Frischbeton und Materialprüfung. In: Beton- und Stahlbetonbau, v. 114, n. 1 (Januar 2019).
- (2013): Developing a Discrete Element Model for simulating fresh concrete: Experimental investigation and modelling of interactions between discrete aggregate particles with fine mortar between them. In: Construction and Building Materials, v. 47 (Oktober 2013).
- (2011): Behaviour of Strain-Hardening Cement-Based Composites Under High Strain Rates. In: Journal of Advanced Concrete Technology, v. 9, n. 1 ( 2011).
- (2018): Correlation of microstructural and mechanical properties of geopolymers produced from fly ash and slag at room temperature. In: Construction and Building Materials, v. 191 (Dezember 2018).
- (2017): Carbon Concrete Composites C3 - Nachhaltige Bindemittel und Betone für die Zukunft. In: Beton- und Stahlbetonbau, v. 112, n. 12 (Dezember 2017).
- (2018): Cellulosefaser-Leichtbeton (CFLC). In: Bautechnik, v. 95, n. 10 (Oktober 2018).
- (2018): 3-D-Druck mit Beton: Sachstand, Entwicklungstendenzen, Herausforderungen. In: Bautechnik, v. 95, n. 4 (April 2018).
- (2002): Bruchmechanische Eigenschaften von hochfestem Beton. In: Beton- und Stahlbetonbau, v. 97, n. 9 (September 2002).
Structurae kooperiert mit
