Data-driven design process and production of stress-optimized concrete girders with integrated tendons using 3D printing
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Marc-Patrick Pfleger
(FH Campus Wien, University of Applied Sciences, Vienna, Austria)
Nina Sam (FH Campus Wien, University of Applied Sciences, Vienna, Austria) Elisabeth Radl (FH Campus Wien, University of Applied Sciences, Vienna, Austria) Markus Vill (FH Campus Wien, University of Applied Sciences, Vienna, Austria) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Beyond Structural Engineering in a Changing World, San José, Cost Rica, 25-27 Seotember 2024 | ||||
| Veröffentlicht in: | IABSE Congress San José 2024 | ||||
|
|||||
| Seite(n): | 525-532 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/sanjose.2024.0525 | ||||
| Abstrakt: |
This paper deals with the data-driven design and manufacturing process of stress-optimized concrete girders. Parametric design concepts are utilized to generate load-specific cross-section dimensions that can be varied along the longitudinal axis of a beam or girder. By integrating FEM- analysis into this process, each segment can be optimized with regards to its topology, including tendon guides that are integrated into the concrete structure. Beginning with an overview of the theoretical background of concrete 3D printing and the basics of its digital process chains, this text describes the manufacturing process of the components. Furthermore, the structural properties are compared with the predicted deflection and load-bearing behaviour. Concluding, the results are discussed in detail. |
||||