Smart Materials and Structures - v. 14, n. 5 (Oktober 2005)

Erschienen:	Oktober 2005

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
van Humbeeck, Jan / Kustov, Sergey	Active and passive damping of noise and vibrations through shape memory alloys: applications and mechanisms	S171-S185
Suresh, Rupali / Tjin, Swee Chuan / Ngo, Nam Quoc	Application of a new fiber Bragg grating based shear force sensor for monitoring civil structural components	982-988
Paquette, Jason W. / Kim, Kwang J. / Kim, Doyeon / Yim, Woosoon	The behavior of ionic polymer–metal composites in a multi-layer configuration	881-888
Taylor, Curtis R. / Malshe, Ajay P. / Salamo, Gregory / Prince, Robin N. / Riester, Laura / Cho, Seong Oh	Characterization of ultra-low-load (µN) nanoindents in GaAs(100) using a cube corner tip	963-970
Abhilash, V. / Sumesh, M. A. / Mohan, S.	Composition analysis of NiTi thin films sputtered from a mosaic target: synthesis and simulation	S323-S328
Choi, Y. T. / Cho, J. U. / Choi, S. B. / Wereley, N. M.	Constitutive models of electrorheological and magnetorheological fluids using viscometers	1025-1036
Yuan, B. / Chung, C. Y. / Zhang, X. P. / Zeng, M. Q. / Zhu, M.	Control of porosity and superelasticity of porous NiTi shape memory alloys prepared by hot isostatic pressing	S201-S206
D'Souza, Kiran / Epureanu, Bogdan I.	Damage detection in nonlinear systems using system augmentation and generalized minimum rank perturbation theory	989-1000
Mohanchandra, K. P. / Shin, Daniel / Carman, G. P.	Deposition and characterization of Ti–Ni–Pd and Ti–Ni–Pt shape memory alloy thin films	S312-S316
Oh, Hyun-Ung / Izawa, Katsuhiko / Taniwaki, Shigemune	Development of variable-damping isolator using bio-metal fiber for reaction wheel vibration isolation	928-933
Cheng, Xin / Huang, Shifeng / Chang, Jun / Lu, Lingchao / Liu, Futian / Ye, Zengmao / Wang, Shoude	Dielectric and piezoelectric properties of piezoelectric ceramic–sulphoaluminate cement composites	N59-N63
Kim, Dae-Hyun / Kim, Young-Han / Kim, Chun-Gon	Directivity evaluation of fiber optic sensor for detecting Lamb waves	1037-1046
Suresh, N. / Ramamurty, U.	The effect of ageing on the damping properties of Cu–Al–Ni shape memory alloys	N47-N51
Guo, Shihai / Zhang, Yanghuan / Quan, Baiyun / Li, Jianliang / Qi, Yan / Wang, Xinlin	The effect of doped elements on the martensitic transformation in Ni–Mn–Ga magnetic shape memory alloy	S236-S238
Pelíšková, Michaela / Vilčáková, Jarmila / Omastová, Maria / Sáha, Petr / Li, Chunzhong / Quadrat, Otakar	The effect of pressure deformation on dielectric and conducting properties of silicone rubber/polypyrrole composites in the percolation threshold region	949-952
Kim, Seon Jeong / Kim, Min Sup / Shin, Su Ryon / Kim, In Young / Kim, Sun I. / Lee, Sang Hoon / Lee, Tae Soo / Spinks, Geoffrey M.	Enhancement of the electromechanical behavior of IPMCs based on chitosan/polyaniline ion exchange membranes fabricated by freeze-drying	889-894
Li, Mingfeng / Lim, Teik C. / Shepard, W. Steve / Guan, Y. H.	Experimental active vibration control of gear mesh harmonics in a power recirculation gearbox system using a piezoelectric stack actuator	917-927
Chen, Yong / Wickramasinghe, Viresh / Zimcik, David	Experimental evaluation of the Smart Spring for helicopter vibration suppression through blade root impedance control	1066-1074
Huang, H. / Zheng, H. Y. / Liu, Y.	Experimental investigations of the machinability of Ni50.6Ti49.4 alloy	S297-S301
Su, Zhongqing / Ye, Lin	A fast damage locating approach using digital damage fingerprints extracted from Lamb wave signals	1047-1054
Moumni, Z. / van Herpen, A. / Riberty, P.	Fatigue analysis of shape memory alloys: energy approach	S287-S292
Ohba, Takuya / Miyamoto, Naohiro / Fukuda, Koudai / Fukuda, Takashi / Kakeshita, Tomoyuki / Kato, Kenichi	Fundamental structure of a Ni2MnGa intermediate phase having an orthorhombic lattice	S197-S200
Sharma, Manu / Singh, S. P. / Sachdeva, B. L.	Fuzzy logic based modal space control of a cantilevered beam instrumented with piezoelectric patches	1017-1024
Zhu, T. J. / Lu, L. / Lai, M. O. / Ding, J.	Growth and magnetic properties of NiMnGa thin films prepared by pulsed laser ablation	S293-S296
Ge, Y. / Heczko, O. / Söderberg, O. / Hannula, S.-P. / Lindroos, V. K.	Investigation of magnetic domains in Ni–Mn–Ga alloys with a scanning electron microscope	S211-S215
Jacesko, Stefany / Abraham, Jose K. / Ji, Taeksoo / Varadan, Vijay K. / Cole, Marina / Gardner, Julian W.	Investigations on an electronic tongue with polymer microfluidic cell for liquid sensing and identification	1010-1016
Zhou, G. Y. / Wang, Q.	Magnetorheological elastomer-based smart sandwich beams with nonconductive skins	1001-1009
Vokoun, D. / Wang, Y. W. / Goryczka, T. / Hu, C. T.	Magnetostrictive and shape memory properties of Fe–Pd alloys with Co and Pt additions	S261-S265
Liu, Yinong / Favier, D. / Orgeas, L.	Mechanistic simulation of martensite reorientation deformation of polycrystalline NiTi	S207-S210
Haga, Y. / Mizushima, M. / Matsunaga, T. / Esashi, M.	Medical and welfare applications of shape memory alloy microcoil actuators	S266-S272
Ren, J. / Liew, K. M.	Meshfree modelling and simulation of the thermomechanical behaviour of shape memory alloys	S302-S311
Nam, Tae-hyun / Park, Soo-moon / Kim, Tae-Yeon / Kim, Yeon-wook	Microstructures and shape memory characteristics of Ti–25Ni–25Cu(at.%) alloy ribbons	S239-S244
Kumar, Rajiv / Singh, S. P. / Chandrawat, H. N.	Multivariable adaptive vibration control of smart structures using iterative (LQG) control strategies	953-962
Cheng, Jinquan / Taheri, Farid	A novel smart adhesively bonded joint system	971-981
Eggeler, Gunther / Khalil-Allafi, Jafar / Gollerthan, Susanne / Somsen, Christoph / Schmahl, Wolfgang / Sheptyakov, Denis	On the effect of aging on martensitic transformations in Ni-rich NiTi shape memory alloys	S186-S191
Lin, Yung Bin / Pan, Chih Liang / Kuo, Yuan Hung / Chang, Kuo Chun / Chern, Jenn Chuan	Online monitoring of highway bridge construction using fiber Bragg grating sensors	1075-1082
Bang, Hyung-Joon / Kang, Hyun-Kyu / Hong, Chang-Sun / Kim, Chun-Gon	Optical fiber sensor systems for simultaneous monitoring of strain and fractures in composites	N52-N58
Kim, Tae-Woo / Kim, Ji-Hwan	Optimal distribution of an active layer for transient vibration control of a flexible plate	904-916
Khalil-Allafi, J. / Schmahl, W. W. / Reinecke, T.	Order parameter evolution and Landau free energy coefficients for the B2↔R-phase transition in a NiTi shape memory alloy	S192-S196
Sawaguchi, T. / Kikuchi, T. / Kajiwara, S.	The pseudoelastic behavior of Fe–Mn–Si-based shape memory alloys containing Nb and C	S317-S322
Söderberg, O. / Ge, Y. / Sozinov, A. / Hannula, S.-P. / Lindroos, V. K.	Recent breakthrough development of the magnetic shape memory effect in Ni–Mn–Ga alloys	S223-S235
Kim, Jaehwan / Lee, Jin-Ho	Self-moving cell linear motor using piezoelectric stack actuators	934-940
Liu, Yong	Shape Memory and Related Technologies
Ishida, Akira / Sato, Morio / Tabata, Osamu / Yoshikawa, Wataru	Shape memory thin films formed with carrousel-type magnetron sputtering apparatus	S216-S222
Wada, Kiyohide / Liu, Yong	Shape recovery of NiTi shape memory alloy under various pre-strain and constraint conditions	S273-S286
Loewke, Kevin / Meyer, David / Starr, Anthony / Nemat-Nasser, Sia	Signal identification in smart composite materials using the two-dimensional fast Fourier transform	895-903
Wan, Ying / Wen, Dijiang	Stability of thermo-sensitive properties of carbon-black/styrene-butadiene-rubber composite membranes	941-948
Sampath, V.	Studies on the effect of grain refinement and thermal processing on shape memory characteristics of Cu–Al–Ni alloys	S253-S260
Chernenko, V. A. / Ohtsuka, M. / Köhl, M. / Khovailo, V. V. / Takagi, T.	Transformation behavior of Ni–Mn–Ga thin films	S245-S252
Bonello, Philip / Brennan, Michael J. / Elliott, Stephen J.	Vibration control using an adaptive tuned vibration absorber with a variable curvature stiffness element	1055-1065

Über diese
Datenseite
IssueID
21339
Veröffentlicht am:
04.12.2018
Geändert am:
03.08.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Smart Materials and Structures - v. 14, n. 5 (Oktober 2005)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Smart Materials and Structures - v. 14, n. 5 (Oktober 2005)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.