Qing Wang 
- (2024): Effects of regional freight structure and energy intensity on CO2 emission of transport—a case study in Yangtze River Delta. In: International Journal of Sustainable Transportation, v. 18, n. 5 (Februar 2024).
- (2023): Experimental Investigation on Reservoir Sediment Flushing through a Bottom Tunnel with an Initially Covered Intake. In: Journal of Hydraulic Engineering, v. 149, n. 8 (August 2023).
- (2024): Fillers to improve the ductility and impermeability of crumb rubber concrete. In: Construction and Building Materials, v. 425 (April 2024).
- (2024): Elucidating the reaction of seashell powder within fly ash cement: A focus on hydration products. In: Construction and Building Materials, v. 428 (Mai 2024).
- (2024): Film-Forming Property of Cement Paste with Red Mud as a Supplementary Cementitious Material. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 6 (Juni 2024).
- (2024): Experimental study of multiscale hybrid fiber-reinforced ambient-cured LEGC under uniaxial compression. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2024): Effects of Carbonation–Hydration Curing on CO2 Uptake, Mechanical Properties, and Leaching Behavior of Heavy Metals in Stainless Steel Slag. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 3 (März 2024).
- (2023): Fabrication of Microcapsule-Type Long-Lasting Phosphorescent Sensor for Concrete Crack Monitoring. In: Structural Control and Health Monitoring, v. 2023 (Februar 2023).
- (2023): Effect of dry-wet cycles on the mechanical properties of saline soil solidified with sulfur-free lignin and hydrophobic polymer. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Effect of hydroxypropyl methyl cellulose (HPMC) as foam stabilizer on the workability and pore structure of iron tailings sand autoclaved aerated concrete. In: Construction and Building Materials, v. 376 (Mai 2023).
- (2023): Effect of concrete surface roughness on shear strength of frozen soil–concrete interface based on 3D printing technology. In: Construction and Building Materials, v. 366 (Februar 2023).
- (2023): Effect of modifiers on crystalizing habit and mechanical strength of α-hemihydrate gypsum prepared from PG by an autoclaved method. In: Construction and Building Materials, v. 366 (Februar 2023).
- (2023): Effects of hydrophobic modified fly ash on resistance of chloride corrosion and water penetration of cement mortar in the early hydration stage. In: Journal of Building Engineering, v. 64 (April 2023).
- (2022): Effective solution for improving rheological properties of cement paste containing zeolite. In: Construction and Building Materials, v. 351 (Oktober 2022).
- (2022): Development of two-dimensional nano Mts/SA phase change materials for self-adjusting temperature of pavement. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Effects of natural zeolite replacement on the properties of superhydrophobic mortar. In: Construction and Building Materials, v. 348 (September 2022).
- (2022): Fabrication of amphiphobic concrete coating with good abrasion resistance and anti-oil adhesion properties by using waste clam powder. In: Construction and Building Materials, v. 327 (April 2022).
- (2021): Evolution characteristics of secondary tensile mechanical properties of corroded rebars. In: Structures, v. 34 (Dezember 2021).
- (2021): Effects of wettability on the film-forming property of modified cement paste. In: Construction and Building Materials, v. 300 (September 2021).
- (2021): General rules for the inductive characteristics of a piezoelectric structure and its integration with piezoelectric transformer for capacitive compensation. In: Smart Materials and Structures, v. 30, n. 4 (Februar 2021).
- (2012): 'Effective elastic modulus and micro-structure damage of particle-reinforced composites. In: Composite Structures, v. 94, n. 7 (Juni 2012).
- (2020): Effect of polyether-type SRA on the drying shrinkage, pore structure and properties of blended mortar incorporating limestone powder. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Flexural Behavior of Fiber-Reinforced Self-Stressing Concrete T-Shaped Composite Beams. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Fabrication of superhydrophobic concrete used in marine environment with anti-corrosion and stable mechanical properties. In: Construction and Building Materials, v. 251 (August 2020).
- (2018): Effective solution for low shrinkage and low permeability of normal strength concrete using calcined zeolite particles. In: Construction and Building Materials, v. 160 (Januar 2018).
- (2019): Effect of mix component on the mechanical properties of coral concrete under axial compression. In: Construction and Building Materials, v. 223 (Oktober 2019).
- (2016): Distributed models of self-stress value in textile-reinforced self-stressing concrete. In: Construction and Building Materials, v. 126 (November 2016).
- (2016): Fuzzy C-means clustering analysis based on quantum particle swarm optimization algorithm for the grouping of rock discontinuity sets. In: KSCE Journal of Civil Engineering, v. 21, n. 4 (Juli 2016).
- (2018): Flexural performance of high strength engineered cementitious composite-steel beam coupling with shrinkage load. In: Construction and Building Materials, v. 191 (Dezember 2018).
- (2018): Effects of coral, recycled and natural coarse aggregates on the mechanical properties of concrete. In: Construction and Building Materials, v. 192 (Dezember 2018).
Structurae kooperiert mit
