Qing Wang 
- (2023): Mechanical properties of basalt fiber reinforced ambient-cured lightweight expanded polystyrene geopolymer concrete. In: Journal of Building Engineering, v. 80 (Dezember 2023).
- (2023): Investigation of Ultrahigh-Performance Concrete Fracture Characteristics with Different Steel Fiber Fractions Based on Acoustic Emission. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 12 (Dezember 2023).
- (2023): Modeling the effect of automated fiber placement induced gaps based on serial layer scanned point clouds. In: Composite Structures, v. 313 (Juni 2023).
- (2023): Investigation into microbial contamination in microapartments in a coastal city. In: Sustainable Cities and Society, v. 91 (April 2023).
- (2023): Mortar film thickness on the autogenous shrinkage of concrete: Test and simulation. In: Journal of Building Engineering, v. 66 (Mai 2023).
- (2023): Longitudinal Multiple Presence of Trucks on Continuous Bridge Spans. In: Practice Periodical on Structural Design and Construction, v. 28, n. 2 (Mai 2023).
- (2023): Mechanical response of fibre metal laminates (FMLs) under low to intermediate strain rate tension. In: Composite Structures, v. 305 (Februar 2023).
- (2023): Impact of crumb rubber particle size on the mechanical and microstructure properties of rubberized concrete. In: Structural Concrete, v. 24, n. 3 (April 2023).
- (2022): Long‐lasting phosphorescent microcapsules based on in‐situ polymerization method for damage sensing. In: Structural Control and Health Monitoring, v. 29, n. 12 (5 Oktober 2022).
- (2023): Impact of polyvinyl alcohol fiber on the full life-cycle shrinkage of cementitious composite. In: Journal of Building Engineering, v. 63 (Januar 2023).
- (2022): An in-process inspection method integrating deep learning and classical algorithm for automated fiber placement. In: Composite Structures, v. 300 (November 2022).
- (2022): Impact of Limestone Powder on the Mechanical and Microstructure Properties of Magnesium Oxychloride Cement Pastes. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 9 (September 2022).
- (2022): Mechanical properties of fibre reinforced seawater sea-sand recycled aggregate concrete under axial compression. In: Construction and Building Materials, v. 331 (Mai 2022).
- (2021): Mechanical properties of high strength POM-FRCC and its performance under elevated temperatures. In: Construction and Building Materials, v. 290 (Juli 2021).
- (2021): Improving mechanical behavior and microstructure of concrete by using BOF steel slag aggregate. In: Construction and Building Materials, v. 277 (März 2021).
- (2022): Impact of condensed silica fume on splitting tensile strength and brittleness of high strength self‐compacting concrete. In: Structural Concrete, v. 23, n. 1 (Januar 2022).
- (2021): Influence of corrosion pit on the tensile mechanical properties of a multi-layered wire rope strand. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): Impact of Elevated Temperatures on the Performance of High-Strength Engineered Cementitious Composite. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 9 (September 2021).
- (2021): Impact of sustained load on damage characteristics of reinforced concrete beams under the combined action of salt freeze-thaw cycles and corrosion. In: Construction and Building Materials, v. 273 (März 2021).
- (2021): Interdependence of passing ability, dilatancy and wet packing density of concrete. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2021): Investigation on the Distribution Characteristics of Partial Carbonation Zone of Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (Januar 2021).
- (2020): A Multifield Model for Early-Age Massive Concrete Structures: Hydration, Damage, and Creep. In: Journal of Engineering Mechanics (ASCE), v. 146, n. 10 (Oktober 2020).
- (2021): Mesoscopic numerical simulation of fracture process and failure mechanism of cement mortar. In: Structural Concrete, v. 22 (Januar 2021).
- (2018): Mechanical properties of sea sand recycled aggregate concrete under axial compression. In: Construction and Building Materials, v. 175 (Juni 2018).
- (2019): Microfluidic synthesis of polymeric fibers containing rejuvenating agent for asphalt self-healing. In: Construction and Building Materials, v. 219 (September 2019).
- (2019): Influence of sustained load on corrosion characteristics of reinforced concrete beams under galvanostatic accelerated corrosion. In: Construction and Building Materials, v. 215 (August 2019).
- (2012): A modified micro-mechanics model for estimating effective elastic modulus of concrete. In: Construction and Building Materials, v. 36 (November 2012).
- (2017): Mechanical properties of steel corrosion products in reinforced concrete. In: Materials and Structures, v. 50, n. 2 (April 2017).
- (2018): Mixture Optimization on internally Cured High Strength Engineered Cementitious Composite with pre-wetted Sand-like Zeolite. In: Journal of Advanced Concrete Technology, v. 16, n. 9 (September 2018).
- (2018): Influence of stirrup arrangements on the corrosion characteristics of reinforced concrete members. In: Construction and Building Materials, v. 192 (Dezember 2018).
Structurae kooperiert mit
