0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Han, Yi / Meng, Li-Yi / Lin, Runsheng / Kim, Songrae / Kim, Taewan / Wang, Xiao-Yong (2024): Evaluating the sustainability of microwave pre-cured high-volume slag concrete: Mechanical properties, environmental impact and cost-benefit analysis. In: Journal of Building Engineering, v. 96 (November 2024).

    https://doi.org/10.1016/j.jobe.2024.110663

  2. Kang, Choonghyun / Kim, Taewan / Park, Yong-Myung / Seo, Ki-Young (2024): Hydration Characteristics of Slag-Ca(OH)2-Al2O3 Binder in a 60 °C Curing Environment with Brine as Mixing Water. In: International Journal of Concrete Structures and Materials, v. 18, n. 1 (2 Januar 2024).

    https://doi.org/10.1186/s40069-024-00675-y

  3. Kim, Taewan / Lee, Seungchul: Deep learning integrated Bayesian health indicator for cross-machine health monitoring. In: Structural Health Monitoring.

    https://doi.org/10.1177/14759217241227599

  4. Kang, Choonghyun / Kim, Taewan (2023): Development of construction materials using red mud and brine. In: Case Studies in Construction Materials, v. 18 (Juli 2023).

    https://doi.org/10.1016/j.cscm.2023.e02185

  5. Kang, Choonghyun / Kim, Taewan (2023): Influence of brine on hydration reaction of calcium sulfoaluminate and slag blended cement. In: Case Studies in Construction Materials, v. 18 (Juli 2023).

    https://doi.org/10.1016/j.cscm.2023.e02159

  6. Kim, Taewan / Yoon, Youngjoon / Lee, Byeongdo / Ham, Namhyuk / Kim, Jae-Jun (2022): Cost–Benefit Analysis of Scan-vs-BIM-Based Quality Management. In: Buildings, v. 12, n. 12 (1 Dezember 2022).

    https://doi.org/10.3390/buildings12122052

  7. Kim, Taewan (2022): Effects of sodium aluminate and reverse osmosis brine on hydration and mechanical properties of slag. In: Construction and Building Materials, v. 360 (Dezember 2022).

    https://doi.org/10.1016/j.conbuildmat.2022.129577

  8. Kim, Taewan (2022): The compressive strength and microstructural properties of alkali-activated slag cement mixed with zinc oxide. In: Magazine of Concrete Research, v. 74, n. 18 (September 2022).

    https://doi.org/10.1680/jmacr.21.00197

  9. Kang, Choonghyun / Kim, Taewan (2022): Effect of reverse-osmosis brine and sodium aluminate on the hydration properties and strength of alkali-activated slag cement. In: Case Studies in Construction Materials, v. 16 (Juni 2022).

    https://doi.org/10.1016/j.cscm.2022.e01078

  10. Kim, Taewan (2021): Characteristics of alkali-activated slag cement-based ultra-lightweight concrete with high-volume cenosphere. In: Construction and Building Materials, v. 302 (Oktober 2021).

    https://doi.org/10.1016/j.conbuildmat.2021.124165

  11. Jun, Yubin / Kim, Jae Hong / Han, Seong Ho / Kim, Taewan (2021): Influence of seawater on alkali-activated slag concrete. In: Materials and Structures, v. 54, n. 3 (16 April 2021).

    https://doi.org/10.1617/s11527-021-01719-5

  12. Lee, Junhyung / Kim, Taewan / Son, Bongsoo (2021): Empirical Observation of Maximum Throughput Change in Isolated Merging Bottlenecks Depending on On-Ramp Traffic Flow Ratio. In: KSCE Journal of Civil Engineering, v. 25, n. 5 (12 März 2021).

    https://doi.org/10.1007/s12205-021-0496-9

  13. Kim, Taewan / Kang, Choonghyun (2020): The Mechanical Properties of Alkali-Activated Slag-Silica Fume Cement Pastes by Mixing Method. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 Januar 2020).

    https://doi.org/10.1186/s40069-020-00416-x

  14. Kim, Taewan (2013): Improvement of a Requirement for Providing Special Boundary Element Considering Feature of Domestic High-rise Shear Walls. In: Architectural Research, v. 15, n. 1 (März 2013).

    https://doi.org/10.5659/aikar.2013.15.1.43

  15. Kim, Daeyoung / Kim, Taewan / Oh, Gwanjun / Huh, Jongchul / Ko, Kyungnam (2016): A comparison of ground-based LiDAR and met mast wind measurements for wind resource assessment over various terrain conditions. In: Journal of Wind Engineering and Industrial Aerodynamics, v. 158 (November 2016).

    https://doi.org/10.1016/j.jweia.2016.09.011

  16. Kim, Taewan / Chu, Yurim (2018): Assessment of Korean Seismic Design Practice for Low-rise Reinforced Concrete Wall-frame Buildings. In: Journal of Asian Architecture and Building Engineering, v. 17, n. 3 (September 2018).

    https://doi.org/10.3130/jaabe.17.473

  17. Kang, Choonghyun / Kim, Taewan (2020): Pore and strength characteristics of alkali-activated slag paste with seawater. In: Magazine of Concrete Research, v. 72, n. 10 (Mai 2020).

    https://doi.org/10.1680/jmacr.18.00390

  18. Kim, Jinkoo / Kim, Taewan (2009): Assessment of progressive collapse-resisting capacity of steel moment frames. In: Journal of Constructional Steel Research, v. 65, n. 1 (Januar 2009).

    https://doi.org/10.1016/j.jcsr.2008.03.020

  19. Kim, Taewan / Kim, Jinkoo (2009): Collapse analysis of steel moment frames with various seismic connections. In: Journal of Constructional Steel Research, v. 65, n. 6 (Juni 2009).

    https://doi.org/10.1016/j.jcsr.2008.11.006

  20. Park, Sunkyu / Kim, Taewan / Kim, KwangSoo / Hong, Sung-Nam (2010): Flexural behavior of steel I-beam prestressed with externally unbonded tendons. In: Journal of Constructional Steel Research, v. 66, n. 1 (Januar 2010).

    https://doi.org/10.1016/j.jcsr.2009.07.013

  21. Park, Sunkyu / Kim, Taewan / Hong, Sung-Nam (2010): Flexural behavior of continuous steel girder with external post-tensioning and section enhancement. In: Journal of Constructional Steel Research, v. 66, n. 2 (Februar 2010).

    https://doi.org/10.1016/j.jcsr.2009.09.003

  22. Kim, Taewan / Rens, Kevin L. (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal and High-Strength Concrete. I: Experimental Study. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (Dezember 2008).

    https://doi.org/10.1061/(asce)0899-1561(2008)20:12(727)

  23. Kim, Taewan / Rens, Kevin L. (2008): Concrete Maturity Method Using Variable Temperature Curing for Normal-Strength Concrete Mixes. II: Theoretical Study. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 12 (Dezember 2008).

    https://doi.org/10.1061/(asce)0899-1561(2008)20:12(735)

  24. Lee, Jooyong / Kim, Taewan / Chung, Jin-Hyuk / Kim, Jinho (2016): Modeling lane formation in pedestrian counter flow and its effect on capacity. In: KSCE Journal of Civil Engineering, v. 20, n. 3 (März 2016).

    https://doi.org/10.1007/s12205-016-0741-9

  25. Kim, Taewan / Foutch, Douglas A. (2007): Application of FEMA methodology to RC shear wall buildings governed by flexure. In: Engineering Structures, v. 29, n. 10 (Oktober 2007).

    https://doi.org/10.1016/j.engstruct.2006.12.011

  26. Han, Aijie / Lu, Weiyi / Kim, Taewan / Punyamurtula, Venkata K. / Qiao, Yu (2009): The dependence of infiltration pressure and volume in zeolite Y on potassium chloride concentration. In: Smart Materials and Structures, v. 18, n. 2 (Februar 2009).

    https://doi.org/10.1088/0964-1726/18/2/024005

  27. Rens, Kevin L. / Kim, Taewan (2007): Inspection of Quebec Street Bridge in Denver, Colorado: Destructive and Nondestructive Testing. In: Journal of Performance of Constructed Facilities (ASCE), v. 21, n. 3 (Juni 2007).

    https://doi.org/10.1061/(asce)0887-3828(2007)21:3(215)

  28. Kim, Taewan / Kim, Jinkoo / Park, Junhee (2009): Investigation of Progressive Collapse-Resisting Capability of Steel Moment Frames Using Push-Down Analysis. In: Journal of Performance of Constructed Facilities (ASCE), v. 23, n. 5 (Oktober 2009).

    https://doi.org/10.1061/(asce)0887-3828(2009)23:5(327)

  29. Kim, Taewan / Jun, Yubin (2018): Mechanical Properties of Na2CO3-Activated High-Volume GGBFS Cement Paste. In: Advances in Civil Engineering, v. 2018 ( 2018).

    https://doi.org/10.1155/2018/8905194

  30. Doh, Jeung-Hwan / Guan, Hong / Kim, Taewan (2012): Parametric and comparative study of spandrel beam effect on the punching shear strength of reinforced concrete flat plates. In: The Structural Design of Tall and Special Buildings, v. 21, n. 8 (Oktober 2012).

    https://doi.org/10.1002/tal.641

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine