0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

SporX - Design and construction of a ten-storey timber building in Drammen, Norway

 SporX - Design and construction of a ten-storey timber building in Drammen, Norway
Autor(en): , , , ,
Beitrag für IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022, veröffentlicht in , S. 1226-1233
DOI: 10.2749/prague.2022.1226
Preis: € 25,00 inkl. MwSt. als PDF-Dokument  
ZUM EINKAUFSWAGEN HINZUFÜGEN
Vorschau herunterladen (PDF-Datei) 0.16 MB

SporX is an innovative, ten-storey office building recently built in Drammen, Norway. It makes use of timber elements, both glued-laminated and cross-laminated, for all load-bearing structure above...
Weiterlesen

Bibliografische Angaben

Autor(en): (Degree of Freedom SLU, Valencia, Spain)
(Degree of Freedom SLU, Valencia, Spain)
(Degree of Freedom SLU, Valencia, Spain)
(Degree of Freedom SLU, Valencia, Spain)
(Degree of Freedom AS, Oslo, Norway)
(Degree of Freedom AS, Oslo, Norway)
(Degree of Freedom AS, Oslo, Norway)
Medium: Tagungsbeitrag
Sprache(n): Englisch
Tagung: IABSE Symposium: Challenges for Existing and Oncoming Structures, Prague, Czech Republic, 25-27 May 2022
Veröffentlicht in:
Seite(n): 1226-1233 Anzahl der Seiten (im PDF): 8
Seite(n): 1226-1233
Anzahl der Seiten (im PDF): 8
DOI: 10.2749/prague.2022.1226
Abstrakt:

SporX is an innovative, ten-storey office building recently built in Drammen, Norway. It makes use of timber elements, both glued-laminated and cross-laminated, for all load-bearing structure above ground floor. The architectural requirement for two large cores servicing a relatively small floor plan allowed for a robust timber structural solution. Timber was chosen as a natural, sustainable, and readily available local material and to minimise building loads in a riverside location with poor ground conditions. All timber elements were fabricated from a LOD400 BIM model developed by the design team and fabricated with strict tolerances to allow for a rapid construction process. Larger element sizes were chosen as having design advantages both for robustness and for connections design. Connections are made using both screwed connections and proprietary concealed connectors. All the timber structure has been designed for R90 fire resistance.

Stichwörter:
Fertigung Brand BIM
Copyright: © 2022 International Association for Bridge and Structural Engineering (IABSE)
Lizenz:

Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden.