One-sided repair of corroded steel girder end with high-strength bolted doubler plate and evaluation of its resiliency after the repair
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Hitoshi Moriyama
(Kumamoto University, Kumamoto, JAPAN)
Lang Yu (Osaka City University, Osaka, JAPAN) Takashi Yamaguchi (Osaka City University, Osaka, JAPAN) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Resilient technologies for sustainable infrastructure, Christchurch, New Zealand, 3-5 February 2021 | ||||
| Veröffentlicht in: | IABSE Congress Christchurch 2020 | ||||
|
|||||
| Seite(n): | 597-604 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/christchurch.2021.0597 | ||||
| Abstrakt: |
Repair of steel girder end is sometimes conducted from one side when work space is restricted or corrosion extent is small. This study focuses on repair with high-strength bolted doubler plate as effective and quick one-sided repair method of corroded girder end. FEA was conducted to evaluate the resistance of intact, corroded and repaired girder and to investigate geometrical dimensions of the doubler plate for enhancing its resiliency. From obtained results, both high repair effect and resiliency can be secured with one-sided bolted and small plate, if the web plate and bearing stiffener is prevented from buckling. As contact force between doubler plate and lower flange is the most important to resisting mechanism, they should be touched with each other. Regarding bolt arrangement, it’d be desirable to reduce the distance between lower flange and end bolt. Finally, the repair work such as jack-up and perforation has almost no influence on the ultimate strength. |
||||
| Stichwörter: |
Korrosion Schraubverbindung
|
||||