Experimental Investigation of the Punching Shear Behaviour of RC Slab-Column Connections Under Seismic Loading
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Amr Abdelkhalik
(Assistant Lecturer, Structural Engineering Department, Badr University, Cairo, EGYPT)
Tamer Elafandy (Associate Professor, RC Institute, Housing and Building National Research Center, Giza, EGYPT) Amr Abdelrahman (Professor, Structural Engineering Department, Ain Shams University, Cairo, EGYPT) Alaa Sherif (Professor, Civil Engineering Department, Mataria, Helwan University, Cairo, EGYPT) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Conference: Engineering the Developing World, Kuala Lumpur, Malaysia, 25-27 April 2018 | ||||
| Veröffentlicht in: | IABSE Conference Kuala Lumpur 2018 | ||||
|
|||||
| Seite(n): | 403-410 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/kualalumpur.2018.0403 | ||||
| Abstrakt: |
Reinforced concrete flat slab-column structures are widely used because of their practicality. However, this type of structures can be subjected to punching-shear failure with in the slab-column connections. Without shear reinforcement, the slab-column connection can undergo brittle punching failure, especially when the structure is subjected to lateral loading in seismic zones. This research is a part of an extensive investigation about the punching shear behavior of interior RC slab-column connections under seismic loading. The current paper represents only the results of the first two tested specimens. The main objective is to discuss the nature and mechanism of effect seismic loading on punching shear behaviour. Finally, the experimental results are analyzed and compared to international codes such as American Code ACI318-14[1] and Euro Code EC2-2004[2]. In light of these results, some preliminary conclusions are presented. papers will be distributed in the electronic conference proceedings. |
||||
| Stichwörter: |
Erdbebenbelastung
|
||||