Evaluation of the contact area of lorry tyres in Eurocode’s fatigue load model 4 (FLM4)
|
|
|||||||||||
Bibliografische Angaben
| Autor(en): |
Sjoerd Hengeveld
(TNO, Delft, The Netherlands)
Adri Vervuurt (TNO, Delft, The Netherlands) Johan Maljaars (TNO, Delft, The Netherlands; Eindhoven University of Technology, Eindhoven, The Netherlands) |
||||
|---|---|---|---|---|---|
| Medium: | Tagungsbeitrag | ||||
| Sprache(n): | Englisch | ||||
| Tagung: | IABSE Congress: Structural Engineering for Future Societal Needs, Ghent, Belgium, 22-24 September 2021 | ||||
| Veröffentlicht in: | IABSE Congress Ghent 2021 | ||||
|
|||||
| Seite(n): | 1488-1495 | ||||
| Anzahl der Seiten (im PDF): | 8 | ||||
| DOI: | 10.2749/ghent.2021.1488 | ||||
| Abstrakt: |
Fatigue considerations dominate the design of new, innovative steel bridge decks. Weighing bridge deck al- ternatives requires representative values for contact areas and contact stress distributions of the tyres of heavy vehicles. Fatigue load model 4 in the Eurocode EN 1991-2 (FLM4) provides tyre contact areas together with a set of axle loads. The literature survey presented herein shows that the length of the contact area in FLM4 is too large. The consequence of using a more realistic – i.e. shorter – tyre contact length together with a non-uniform contact stress distribution that is observed in practice, is that the contact stresses increase. As a result, the load effect and the fatigue life of some bridge deck details reduce, as is shown by the analyses presented in this paper. A method is proposed for determining an updated tyre contact area for the FLM4 Eurocode model, leading to a more realistic fatigue damage analyses. |
||||
| Stichwörter: |
Ermüdung
|
||||
| Copyright: | © 2021 International Association for Bridge and Structural Engineering (IABSE) | ||||
| Lizenz: | Die Urheberrechte (Copyright) für dieses Werk sind rechtlich geschützt. Es darf nicht ohne die Zustimmung des Autors/der Autorin oder Rechteinhabers/-in weiter benutzt werden. |
||||