Smart Materials and Structures - v. 32, n. 3 (Februar 2023)

Erschienen:	Februar 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Su, Sen / He, Tian / Yang, Hui	3D printed multilayer dielectric elastomer actuators	035021
Hosseinabadi, M. / Etemadi, E. / Serjouei, A. / Bodaghi, M.	3D printed negative stiffness meta-structures with superior energy absorption and super-elastic shape-recovery features	034006
Wang, Jie / Wu, Zongze / Xiao, Rui / Tang, Changyu / Xu, Yangguang	A 3D re-entrant structural metamaterial with negative Poisson’s ratio reinforced by adding arrow structures	035001
Ghassabi, M. / Talebitooti, R.	Acoustic insulation characteristics improvement of a thick CNT-reinforced doubly-curved shell by using GPLRC and MEE composite layers	035004
Zhang, Jiacheng / Zhang, Yiqun / He, Yongxi / Yang, Dongwu / Sun, Zihan / Xiong, Jichuan / Yang, Jianli	Active adjustment of space-borne cable-net antenna via a two-way shape memory alloy spring	035002
Tonomura, Kazuki / Yu, Annie / Ishii, Yuya	Active signal-generating spacer-fabric-type continuous touch/pressure sensor	035029
Li, Jian / Luan, Zhibo / Wang, Yangwei / Huang, Meizhen / Yan, Jie / Wang, Yuhan	Analysis modeling and experiment of bionic winding soft actuator inspired by plant tendrils	035023
Gratz-Kelly, Sebastian / Kruger, Tim / Rizzello, Gianluca / Seelecke, Stefan / Moretti, Giacomo	An audio-tactile interface based on dielectric elastomer actuators	034005
Tu, Dilong / Zhang, Yuan / Zhu, Lei / Qin, Yong / Du, Yanping / Liu, Mengzhou / Ding, Ao	A bistable energy harvester with low base-acceleration and high root mean square output for train bogies: theoretical modeling and experimental validation	035009
Wang, Jiacheng / Lu, Guangtao / Song, Huijun / Wang, Tao / Yang, Dan	Damage identification of thin plate-like structures combining improved singular spectrum analysis and multiscale cross-sample entropy (ISSA-MCSEn)	034001
Li, Ying / Wei, Mingkang / Hu, Xiaobin	Damage monitoring of the planting balcony in vertical greenery buildings using the EMI method	035038
Xiao, Yu / Karnaoukh, Sviatoslaw / Wu, Nan	Design and analysis of a d15 mode piezoelectric energy generator using friction-induced vibration	035040
Zhao, Runmao / Lv, Siyuan / Chen, Gang / Chen, Jianneng / Wang, Qicheng / Wu, Min / Zheng, JunJie	Design and experiment of a new double needle type piezoelectric jetting dispenser	035022
Abdalaziz, Moustafa / Vatandoost, Hossein / Sedaghati, Ramin / Rakheja, Subhash	Design and experimental characterization of a bypass magnetorheological damper featuring variable stiffness and damping	035011
Mizzi, Luke / Hoseini, Seyedeh Farzaneh / Formighieri, Marco / Spaggiari, Andrea	Development and prototyping of SMA-metamaterial biaxial composite actuators	035027
Gu, Haoyu / Ji, Hui / Zhang, Shuwen / Zhai, Chongpu / Xu, Minglong	Displacement sensing with quasi-zero stiffness structure and flexoelectricity	035024
Kumar Kariganaur, Ashok / Kadam, Shubham / Kumar, Hemantha / Arun, M.	Effect of reduced geometric dimensions on torque generation in two plate rotor magnetorheological brake with in-house magnetorheological fluid	035026
Sun, Shuailing / Leng, Yonggang / Hur, Sunghoon / Sun, Fei / Chen, Xiaoyu / Song, Hyun-Cheol / Kang, Chong-Yun	Force and stability mechanism analysis of two types of nonlinear mono-stable and multi-stable piezoelectric energy harvesters using cantilever structure and magnetic interaction	035003
Balasubramaniam, Kaleeswaran / Sikdar, Shirsendu / Ziaja, Dominika / Jurek, Michał / Soman, Rohan / Malinowski, Paweł	A global-local damage localization and quantification approach in composite structures using ultrasonic guided waves and active infrared thermography	035016
Zhou, Lu / Luo, Yun-Ke / Lewis, Roger	Insulated rail joint (IRJ) contact characterisation-an ultrasonic reflectometry approach for a cross-material interface	034007
Pan, Shengshan / Yan, Dong / Zhang, Xue / Zou, Cunyu / Chen, Yuanmeng / Hui, Huaxing / Chen, Sile / Andrawes, Bassem	Investigation on recovery stress and stability of hot-drawn Ni₄₇Ti₄₄Nb₉ SMA	035041
Begonia, Mark / Rowson, Bethany / Scicli, Blake / Goff, John Eric	Laboratory evaluation of climbing helmets: assessment of linear acceleration	034003
Chen, Ying / Kuang, Peipei / Shen, Xiaochen / Lv, Xiaowei / Wang, Yushu / Yin, Weihan / Zou, Tongqing / Wang, Ben / Liu, Yupeng / Fan, Quli	Lignin precipitation-driven fabrication of gradient porous hydrogel actuator with temperature response	035037
Han, Xiao / Fan, Mengjing / Yue, Xinyan / Zhao, Xiaoman / Liu, Yongkun / Hong, Jianhan / Liu, Leigen	Linear flexible capacitive sensor with double helix structure based on multi-needle water-bath electrospinning technology	035012
Liu, Pengqian / Xu, Changhang / Zhang, Yubin / Qin, Yi / Xu, Yinsheng / Xie, Jing / Song, Gangbing	Low-power vibrothermography detection technique for surface cracks on composite sucker rod	035034
Kubík, Michal / Gołdasz, Janusz / Macháček, Ondřej / Strecker, Zbyněk / Sapiński, Bogdan	Magnetorheological fluids subjected to non-uniform magnetic fields: experimental characterization	035007
Motreuil Ragot, Paul / Hunt, Andres / Sacco, Leandro Nicolas / Sarro, Pasqualina Maria / Mastrangeli, Massimo	Manufacturing thin ionic polymer metal composite for sensing at the microscale	035006
Kane, S. R. / Ganguli, Tapas / Shukla, Rahul	Measurements for static shape control optimization of silicon mirror using nonlinear piezoceramic actuators	035035
Warkentin, Andreas / Behlen, Lennart / Ricoeur, Andreas	Model-based investigations of ferroelectric energy harvesting with regard to an improvement of life span and operability	035028
Lan, Chengming / Wen, Lijie / Wang, Jianjun / Li, Weijie / Tang, Lihua	Modeling and analysis of frequency-variable 2–2 cement-based piezoelectric transducers	034008
Min, Jiyong / Choi, Taehun / Cha, Youngsu	Multiple Tendon-inspired Sensors for Hand Motion Detection	035014
Sorrentino, A. / Castagnetti, D.	Novel polyhedral mechanical metamaterial exhibiting negative Poisson’s ratio	035008
Kardarakos, G. C. / Chrysochoidis, N. A. / Varelis, D. / Saravanos, D. A.	Numerical and experimental investigation of the energy harvesting performance of electromechanically coupled piezoelectric prestressed beams subjected to nonlinear vibrations	035019
Mohammad Hashemi, Yadollah / Kadkhodaei, Mahmoud / Sgambitterra, Emanuele / Maletta, Carmine	On the characterization of the compressive response of shape memory alloys using bending	035033
Ding, Ding / Wu, Qian / Gao, Yinan / Wang, Jinmei / Chen, Yixun / Li, Qian	PEDOT/CNT/Bi₂Te₃ coated porous thermoelectric yarns for textile based wearable thermoelectric generator	035036
Cañamero, Francisco J. / Buroni, Federico C. / Aliabadi, Ferri M. H. / Rodríguez-Tembleque, Luis	Piezoelectric performance of lead-free PDMS/CNT/BaTiO₃ piezocomposites with imperfect interphases and CNT agglomerations	035005
Shen, Zhuoshan / Pan, Jisheng / Zhang, Jianwen / Yan, Qiusheng	Preparation and processing performance of high steady-state magnetorheological finishing fluid	035032
Liu, Zeng / Zhang, Shaohui / Zhang, Maolin / Fang, Junpeng / Du, Ling / Zhang, Jian / Xu, Chang / Guo, Yufeng / Tang, Weihua	Pressure sensing of Ga₂O₃ thin film	03LT01
Benshams, Amirmozafar / Hatami, Farzad / Saybani, Mesbah	Probabilistic seismic assessment of innovative concrete bridge piers with Engineered Cementitious Composites (ECC) by different types of shape memory alloys (SMAs) bars	035039
Liu, Pengtao / Wang, Xiaopeng / Chen, Tianning / Wang, Yongquan / Mao, Feiran / Liu, Wenhang	Research on a percussion-based bolt looseness identification method based on phase feature and convolutional neural network	035010
Fan, Xianghong / He, Yuting / Chen, Tao	Research on fatigue crack quantitative monitoring based on eddy current sensor with an interactive induction coil layout	035013
Yuan, Rui / Lv, Yong / Xu, Shijie / Li, Li / Kong, Qingzhao / Song, Gangbing	ResNet-integrated very early bolt looseness monitoring based on intrinsic feature extraction of percussion sounds	034002
Yu, Zhiheng / Hu, Guohong / Chen, Jian / Huang, Fengli / Zhao, Yun / Feng, Jijun	Resonant printing flexible piezoresistive pressure sensor with spherical microstructures	035020
Fu, Jie / Liu, Jing / Lai, Junjie / Zhong, Can / Dai, Zhenyu / Yu, Miao	Robustness analysis of magnetorheological elastomer-based vibration isolation system with optimal fuzzy controller	035018
Chai, Yuan / Wang, Yihan / Liu, Qijian / Qing, Xinlin	Structural health dynamic monitoring for gear transmission based on guided waves	035025
Wu, Jinzhong / Afzal, Burhan / Huang, Zhilong / Yang, Maoju / Sun, Shuaishuai	Study on new magnetorheological chemical polishing process for GaN crystals: polishing solution composition, process parameters, and roughness prediction model	035031
Li, Jian / Liang, Zhihong / Liu, Junjie / Yu, Chao / Zhang, Xuelian / Kan, Qianhua	A thermo-viscoelastic constitutive model addressing the cyclic shape memory effect for thermo-induced shape memory polymers	035030
Xu, Dongmei / Yang, Wenzhong / Zhang, Xuhui / Yu, Simiao / Liang, Tenglin	A U-shaped and alternately driven ultrasonic motor using three bending coupled modes	035017
Hopkins, Jonathan B. / Lee, Ryan H. / Sainaghi, Pietro	Using binary-stiffness beams within mechanical neural-network metamaterials to learn	035015
Zhao, Nan / Linsheng, Huo / Song, Gangbing	Vibration acoustic modulation for bolt looseness monitoring based on frequency-swept excitation and bispectrum	034004

Über diese
Datenseite
IssueID
69179
Veröffentlicht am:
21.03.2023
Geändert am:
21.03.2023

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Smart Materials and Structures - v. 32, n. 3 (Februar 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Smart Materials and Structures - v. 32, n. 3 (Februar 2023)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.