Smart Materials and Structures - v. 18, n. 11 (November 2009)

Erschienen:	November 2009

Autor(en)	Titel	Seite(n)
Gangadharan, R. / Prasanna, G. / Bhat, M. R. / Murthy, C. R. L. / Gopalakrishnan, S.	Acoustic emission source location and damage detection in a metallic structure using a graph-theory-based geodesic approach	115022
Wu, T. Y.	An adaptive left–right eigenvector evolution algorithm for vibration isolation control	115027
Aiyar, Avishek R. / Song, Chao / Kim, Seong-Hyok / Allen, Mark G.	An all-polymer airflow sensor using a piezoresistive composite elastomer	115002
Lim, Jung Pil / Rho, Jong Seok / Yi, Kyung Pyo / Seo, Jung Moo / Jung, Hyun Kyo	Characteristic analysis of a traveling wave ultrasonic motor using an ellipsoidal static contact model	115024
Hasse, Alexander / Campanile, Lucio Flavio	Design of compliant mechanisms with selective compliance	115016
Qing, Xinlin P. / Beard, Shawn / Shen, Shyan Bob / Banerjee, Sourav / Bradley, Ian / Salama, Mamdouh M. / Chang, Fu-Kuo	Development of a real-time active pipeline integrity detection system	115010
Chen, Xi / Liu, Dali / Chen, Jiansheng / Wang, Guolei	The effect of a SiO2layer on the performance of a ZnO-based SAW device for high sensitivity biosensor applications	115021
Kambale, R. C. / Shaikh, P. A. / Bhosale, C. H. / Rajpure, K. Y. / Kolekar, Y. D.	The effect of Mn substitution on the magnetic and dielectric properties of cobalt ferrite synthesized by an autocombustion route	115028
Wu, Mei-Ling / Wu, Liang-Yu / Yang, Wen-Pei / Chen, Lien-Wen	Elastic wave band gaps of one-dimensional phononic crystals with functionally graded materials	115013
Yun, Sungryul / Jang, Sangdong / Yun, Gyu-Young / Kim, Jaehwan	Electrically aligned cellulose film for electro-active paper and its piezoelectricity	117001
Schultz, S. / Kunzler, W. / Zhu, Z. / Wirthlin, M. / Selfridge, R. / Propst, A. / Zikry, M. / Peters, K.	Full-spectrum interrogation of fiber Bragg grating sensors for dynamic measurements in composite laminates	115015
Sreekumar, M. / Singaperumal, M.	A generalized analytical approach to the coupled effect of SMA actuation and elastica deflection	115026
Roy, Tarapada / Chakraborty, Debabrata	Genetic algorithm based optimal control of smart composite shell structures under mechanical loading and thermal gradient	115006
Wang, D. H. / Ai, H. X. / Liao, W. H.	A magnetorheological valve with both annular and radial fluid flow resistance gaps	115001
Boé, A. / Safi, A. / Coulombier, M. / Fabrègue, D. / Pardoen, T. / Raskin, J.-P.	MEMS-based microstructures for nanomechanical characterization of thin films	115018
Gutta, Shivakanth / Lee, Joon S. / Trabia, Mohamed B. / Yim, Woosoon	Modeling of ionic polymer metal composite actuator dynamics using a large deflection beam model	115023
Nguyen, Quoc-Hung / Choi, Seung-Bok	A new approach for dynamic modeling of an electrorheological damper using a lumped parameter method	115020
Nam, Tran Hai / Ahn, Kyoung Kwan	A new structure of a magnetorheological brake with the waveform boundary of a rotary disk	115029
Shih, Hui-Ru / Tzou, Horn-Sen / Walters Jr, Wilbur L.	Photonic control of flexible structures—application to a free-floating parabolic membrane shell	115019
Adhikari, S. / Friswell, M. I. / Inman, D. J.	Piezoelectric energy harvesting from broadband random vibrations	115005
Kim, Seong Jun / Cho, Chahngmin / Kim, Yong Hyup	Polymer packaging for arrayed ionic polymer–metal composites and its application to micro air vehicle control surface	115009
Vialle, Greg / Di Prima, Matthew / Hocking, Erica / Gall, Ken / Garmestani, Hamid / Sanderson, Terry / Arzberger, Steven C.	Remote activation of nanomagnetite reinforced shape memory polymer foam	115014
Das, K. / Batra, R. C.	Symmetry breaking, snap-through and pull-in instabilities under dynamic loading of microelectromechanical shallow arches	115008
Lee, Ki Bang	A theoretical response of the electrostatic parallel plate to constant and low-frequency accelerations	115004
Khoshgoftar, M. J. / Ghorbanpour Arani, A. / Arefi, M.	Thermoelastic analysis of a thick walled cylinder made of functionally graded piezoelectric material	115007
Chen, Y. / Dick, A. J. / Ghorbel, F. H.	Tip trajectories of a smart micro-cantilever beam: analysis and design	115012
Neves, F. / Braz Fernandes, F. M. / Martins, I. / Correia, J. B. / Oliveira, M. / Gaffet, E. / Wang, T.-Y. / Lattemann, M. / Suffner, J. / Hahn, H.	The transformation behaviour of bulk nanostructured NiTi alloys	115003
Choi, Hyunchul / Choi, Jongho / Jeong, Semi / Yu, Chungsun / Park, Jong-Oh / Park, Sukho	Two-dimensional locomotion of a microrobot with a novel stationary electromagnetic actuation system	115017
Madhekar, S. N. / Jangid, R. S.	Variable dampers for earthquake protection of benchmark highway bridges	115011
Yang, Yaowen / Tang, Lihua / Li, Hongyun	Vibration energy harvesting using macro-fiber composites	115025

Autor(en)

Titel

Seite(n)

Gangadharan, R. / Prasanna, G. / Bhat, M. R. / Murthy, C. R. L. / Gopalakrishnan, S.

Acoustic emission source location and damage detection in a metallic structure using a graph-theory-based geodesic approach

115022

Wu, T. Y.

An adaptive left–right eigenvector evolution algorithm for vibration isolation control

115027

Aiyar, Avishek R. / Song, Chao / Kim, Seong-Hyok / Allen, Mark G.

An all-polymer airflow sensor using a piezoresistive composite elastomer

115002