Periodica Polytechnica Civil Engineering - v. 65, n. 1 (2021)

Erschienen:	2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Dufka, Ámos / Zizkova, Nikol / Brozovsky, Jiri	An Analysis of Crystalline Admixtures in Terms of Their Influence on the Resistance of Cementitious Composites to Aggressive Environments
Hashemi, Seyed Shaker / Sadeghi, Kabir / Javidi, Saeid / Malakouti, Mahmoud	Analysis of RC Deep Beams Considering the Shear Deformations and Bar-concrete Interaction
Grivalszki, Péter / Fleit, Gábor / Baranya, Sándor / Józsa, János	Assessment of CFD Model Performance for Flows around a Hydraulic Structure of Complex Geometry
Kaveh, Ali / Milad Hosseini, Seyed / Zaerreza, Ataollah	Boundary Strategy for Optimization-based Structural Damage Detection Problem using Metaheuristic Algorithms: Boundary strategy for optimization-based structural damage detection problem
Rakhimova, Nailia R. / Rakhimov, Ravil / Morozov, Vladimir / Eskin, Aleksey	Calcined Low-grade Clays as Sources for Zeolite Containing Material
Talebpour, Mohammad Hosein / Goudarzi, Younes / Sharifnezhad, Mehrdad	Clustering Elements of Truss Structures for Damage Identification by CBO
Ton-That, Hoang Lan / Nguyen-Van, Hieu	A Combined Strain Element in Static, Frequency and Buckling Analyses of Laminated Composite Plates and Shells
Mobolaji, Kenku / Földes, Dávid / Csiszár, Csaba	Concept of Advanced Personal Rapid Transit at Airports
Liu, Zihan / Jiang, Nan / Zhou, Chuanbo / Ji, Lin / Luo, Xuedong	Damage Effect of Terrorist Attack Explosion-induced Shock Wave in a Double-deck Island Platform Metro Station
Cetin, Altan / Evirgen, Burak / Karslioglu, Asena / Tuncan, Ahmet	The Effect of Basalt Fiber on the Performance of Stone Mastic Asphalt
Mottaghi, Lida / Izadifard, Ramezan Ali / Kaveh, Ali	Factors in the Relationship Between Optimal CO2 Emission and Optimal Cost of the RC Frames: Optimal CO2 Emission and Optimal Cost of the RC Frames
Boudghene Stambouli, Ahmed / Zendagui, Djawad / Bard, Pierre-Yves / Dif, Hamza	Influence of Site Parameters on Fourier Amplification Application for 1D Linear Viscoelastic Method
Bargegol, Iraj / Sakanlou, Farhad / Sohrabi, Mohsen / Hamedi, Gholam Hossein	Investigating the Effect of Metal Nanomaterials on the Moisture Sensitivity Process of Asphalt Mixes
Almusawi, Ali / Sengoz, Burak / Topal, Ali	Investigation of Mixing and Compaction Temperatures of Modified Hot Asphalt and Warm Mix Asphalt
Salmalian, Kaveh / Alijani, Ali / Ramezannejad Azarboni, Habib	A Lagrange Multiplier-based Technique within the Nonlinear Finite Element Method in Cracked Columns
Maraş, Müslüm Murat / Kose, Mehmet Metin / Rızaoglu, Tamer	Microstructural Characterization and Mechanical Properties of Volcanic Tuff (Malatya, Turkey) Used as Building Stone for the Restoring Cultural Heritage
Hosseinaei, Saeed / Ghasemi, Mohammad Reza / Etedali, Sadegh	Optimal Design of Passive and Active Control Systems in Seismic-excited Structures Using a New Modified TLBO
Huynh, Trong-Phuoc / Pham, Van-Hien / Do, Ngoc-Duy / Nguyen, Trong-Chuc / Ho, Nguyen-Trong	Performance Evaluation of Pre-foamed Ultra-lightweight Composites Incorporating Various Proportions of Slag
Secer, Mutlu / Zamani, Amanullah / Isler, Yalcin	A Practical Compensation Method for Differential Column Shortenings in High-rise Reinforced Concrete Buildings
Jhatial, Ashfaque Ahmed / Goh, Wan Inn / Sohu, Samiullah / Mangi, Sajjad Ali / Mastoi, Aamir Khan	Preliminary Investigation of Thermal Behavior of Lightweight Foamed Concrete Incorporating Palm Oil Fuel Ash and Eggshell Powder
Topalić Marković, Jovana / Mučenski, Vladimir / Savić, Dušica / Velkovski, Trajče / Peško, Igor / Tomaš, Lidija	Risk Assessment Model for Planning and Design Processes of Wastewater Treatment Plants
Paul, Rajdip / Dalui, Sujit	Shape Optimization to Reduce Wind Pressure on the Surfaces of a Rectangular Building with Horizontal Limbs
Jaishankar, Periyasamy / Murali, Gunasekaran / Salaimanimagudam, Meivazhisalai Parasuraman / Amran, Yahya Hussein Mugahed / Fediuk, Roman / Karthikeyan, Kothandapani	Study of Topology Optimized Hammerhead Pier Beam Made with Novel Preplaced Aggregate Fibrous Concrete
Pepe, Massimiliano / Costantino, Domenica	UAV Photogrammetry and 3D Modelling of Complex Architecture for Maintenance Purposes: the Case Study of the Masonry Bridge on the Sele River, Italy
Nasr, Mohammed S. / Hasan, Zaid A. / Abed, Mohammed K. / Dhahir, Mohammed K. / Najim, Wissam N. / Shubbar, Ali A. / Habeeb, Zuhair D.	Utilization of High Volume Fraction of Binary Combinations of Supplementary Cementitious Materials in the Production of Reactive Powder Concrete
Souad, Hamzi / Ismail, Mechab / Hichem, Abbad / Noureddine, Elmeiche	Vibration Analysis of Viscoelastic FGM Nanoscale Plate Resting on Viscoelastic Medium Using Higher-order Theory
Fülöp, Tamás	Wave Propagation in Rocks – Investigating the Effect of Rheology

Über diese
Datenseite
IssueID
58593
Veröffentlicht am:
27.09.2022
Geändert am:
27.09.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Periodica Polytechnica Civil Engineering - v. 65, n. 1 (2021)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Periodica Polytechnica Civil Engineering - v. 65, n. 1 (2021)

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.