Construction and Building Materials - November 2021

Erschienen:	November 2021

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Amario, Mayara / Pepe, Marco / Santana Rangel, Caroline / Filho, Romildo Dias Toledo	Analytical tool for assessment of the rheological behavior of recycled aggregate concrete	125166
Liu, Wenchang / Lin, Hongwei / Guo, Hongyu / Zhang, Hongchao / Zhang, Shuguang / Mao, Yongqiang / Fu, Huan	An approach to investigate coarse aggregates movement of asphalt mixture based on wheel tracking test	125161
Cattaneo, Sara / Zorzato, Giacomo / Bonati, Antonio	Assessing method of shear strength between old to new concrete interface under cycling loading	125160
Patil, Mahi / Dalal, Parishi H. / Shreedhar, Sowmya / Dave, Trudeep N. / Iyer, Kannan K. R.	Biostabilization techniques and applications in Civil Engineering: State-of-the-Art	125098
Tong, Liangyu / Zhao, Jihui / Cheng, Zirui	Chloride ion binding effect and corrosion resistance of geopolymer materials prepared with seawater and coral sand	125126
Zhao, Tianliang / Liu, Kai / Li, Qian	Comparison of the rusting behaviors of S450EW weathering steel under continuous spray and wet/dry cycling	125211
Zhang, Zhongze / Xue, Jianing / Zhang, Jiong / Yang, Mingqiang / Meng, Bowen / Tan, Yiran / Ren, Shipu	A deep learning automatic classification method for clogging pervious pavement	125195
Karrech, A. / Dong, M. / Skut, J. / Elchalakani, M. / Shahin, M.	Delithiated β−spodumene as a geopolymer precursor	124974
Li, Jinhui / Wang, Xinpeng / Chen, Dongdong / Wu, Di / Han, Zhen / Hou, Dongshuai / Zhen, Zhicong / Peng, Chengkangyan / Ding, Qingjun / Yin, Bing	Design and application of UHPC with high abrasion resistance	125141
Soldado, Eliana / Antunes, Ana / Costa, Hugo / do Carmo, Ricardo / Júlio, Eduardo	Durability of mortar matrices of low-cement concrete with specific additions	125060
Yang, Xiaolong / Shen, Aiqin / Liang, Mingmei / Jiang, Yixin / Meng, Yongjun	Dynamic flame retardancy and flame mechanism of SBS- modified asphalt containing alumina trihydrate and organic montmorillonite	125077
Liu, Jueding / Fan, Xiangqian / Shi, Chenyu	Effect of bonding layers on dynamic fracture characteristics of FRP reinforced concrete	125136
Tasnim, Sadia / Shaikh, Faiz Uddin Ahmed	Effect of chemical exposure on mechanical properties and microstructure of lightweight polymer composites containing solid waste fillers	125192
Liu, Peng / Zhong, Jingkui / Zhang, Meng / Mo, Liwu / Deng, Min	Effect of CO2 treatment on the microstructure and properties of steel slag supplementary cementitous materials	125171
Jiang, Wenlixia / Zhu, Han / Haruna, Sadi Ibrahim / Zhao, Bo / Shao, Jianwen / Yu, Yong	Effect of crumb rubber powder on mechanical properties and pore structure of polyurethane-based polymer mortar for repair	125169
Wan, Qian / Zhang, Yimin / Zhang, Ruobing	The effect of pore behavior and gel structure on the mechanical property at different initial water content	125146
Chen, Zhibo / Wan, Xianglong / Qian, Yanfeng / Qiao, Jiale / Jia, Jingxuan / Mo, Lu / Gao, Meiling / Cui, Hao / Liu, Yin / Min, Fanfei	The effect on the compressive strength of fly ash based geopolymer concrete with the generation of hydroxy sodalite	125174
Jazebi, Majid / Ahmadi, Mohammad Mehdi / Sahebalzamani, Parastoo	Efficiency of in-filled (geofoam) trenches in mitigating train-induced vibrations: A case study of Tehran-Tabriz railway	125075
Zhu, Ji-Hua / Wu, Xian-Yang / Mohamed, Ibrahim M. A. / Xing, Feng	Electrochemical and microstructural evaluation of acidification damage induced by impressed current cathodic protection after incorporating a hydroxy activated-Mg/Al-double oxide in the external anode mortar	125116
Haruna, Sadi Ibrahim / Zhu, Han / Jiang, Wenlixia / Shao, Jianwen	Evaluation of impact resistance properties of polyurethane-based polymer concrete for the repair of runway subjected to repeated drop-weight impact test	125152
Byron, Diana / Pacheli Heitman, Ana / Neves, Juliana / de Souza, Patterson Patricio / de Oliveira Patricio, Patrícia Santiago	Evaluation of properties of polymer concrete based on epoxy resin and functionalized carbon nanotubes	125155
Lu, Zeyu / Yin, Ran / Yao, Jie / Zhao, Baojun	Experimental and molecular dynamic study on the interfacial strengthening mechanism of PE fiber/cement mortar using advanced oxidation processes	125144
Ren, Jie / Sun, Hongfang / Li, Qun / Li, Zhenming / Ling, Li / Zhang, Xiaogang / Wang, Yanshuai / Xing, Feng	Experimental comparisons between one-part and normal (two-part) alkali-activated slag binders	125177
Tai, Yating / Zhou, Jikai / Ye, Nengjun	Experimental investigation on the effect of pressure-filtration method on compressive strength and microstructure of cement paste	125148
Kong, Zhengyi / Yang, Fan / Jin, Ya / Hong, Shaozheng / Wang, Xueqing / Vu, Quang-Viet / Truong, Viet-Hung / Yu, Bo / Kim, Seung-Eock	Experimental study on bearing capacity of corroded high-strength bolt connections under shear force	125117
Chen, Yu / Lytton, Robert L.	Exploratory analysis of LTPP faulting data using statistical techniques	125025
Cao, Wenxiang / Yi, Wei / Li, Jing / Peng, Jiahui / Yin, Suhong	A facile approach for large-scale recovery of phosphogypsum: An insight from its performance	125190
Ren, Fengming / Liu, Tianyao / Chen, Guangming / Xie, Pan / Xiong, Ming-Xiang / Yuan, Tian / Chen, Yulu / Guo, Shaozu	Flexural behavior and modelling of FRP-bar reinforced seawater sea sand concrete beams exposed to subtropical coastal environment	125071
Gokulanathan, Venkatesan / Arun, Kumar / Priyadharshini, Perumal	Fresh and hardened properties of five non-potable water mixed and cured concrete: A comprehensive review	125089
Hou, Shaodan / Xiao, Jianzhuang / Duan, Zhenhua / Ma, Guowei	Fresh properties of 3D printed mortar with recycled powder	125186
Ebert, Benjamin A. R. / Geiker, Mette R. / Kunther, Wolfgang / Kirkelund, Gunvor M.	Impact of electrodialytic remediation of MSWI fly ash on hydration and mechanical properties of blends with Portland cement	125193
Wang, Jinbang / Sun, Hao / Yu, Linyu / Liu, Shuai / Geng, Dongjian / Yuan, Lianwang / Zhou, Zonghui / Cheng, Xin / Du, Peng	Improvement of intrinsic self-healing ability of concrete by adjusting aggregate gradation and sand ratio	124959
Yao, Hongru / Cao, Yadong / Zhou, Xiaolong / Wang, Jin'an / Wang, Qiang	Improvement on the high-temperature performance and fuel resistance of SBS modified asphalt by hybridizing with polyamide resin	124987
Cos-Gayón López, Fernando / Benlloch Marco, Javier / Calvet Rodríguez, Víctor	Influence of high temperatures on the bond between carbon Fibre-Reinforced polymer bars and concrete	124967
Shahzad, Qamar / Shen, Junyi / Naseem, Rabia / Yao, Yonggang / Waqar, Saad / Liu, Wenqiang	Influence of phase change material on concrete behavior for construction 3D printing	125121
Shanmugasundaram, N. / Praveenkumar, S.	Influence of supplementary cementitious materials, curing conditions and mixing ratios on fresh and mechanical properties of engineered cementitious composites – A review	125038
Poletanovic, Bojan / Janotka, Ivan / Janek, Marian / Bačuvčík, Michal / Merta, Ildiko	Influence of the NaOH-treated hemp fibres on the properties of fly-ash based alkali-activated mortars prior and after wet/dry cycles	125072
Li, Lihui / Yang, Jian / Li, Huanyu / Du, Yuhang	Insights into the microstructure evolution of slag, fly ash and condensed silica fume in blended cement paste	125044
Gao, Danying / Ding, Chong / Pang, Yuyang / Chen, Gang	An inverse analysis method for multi-linear tensile stress-crack opening relationship of 3D/4D/5D steel fiber reinforced concrete	125074
Peng, Xinghai / Yuan, Jiang / Wu, Zhengda / Lv, Songtao / Zhu, Xuan / Liu, Jing	Investigation on strength characteristics of bio-asphalt mixtures based on the time–temperature equivalence principle	125132
Yazdipanah, Farzad / Ameri, Mahmoud / Shahri, Mahyar / Hasheminejad, Navid / Haghshenas, Hamzeh F.	Laboratory investigation and statistical analysis of the rutting and fatigue resistance of asphalt mixtures containing crumb-rubber and wax-based warm mix asphalt additive	125165
Zhong, Bibo / Zhu, Jinying / Morcous, George	Measuring acoustoelastic coefficients for stress evaluation in concrete	125127
Xu, Jie / Niu, Xianli / Ma, Qian / Han, Qinghua	Mechanical properties and damage analysis of rubber cement mortar mixed with ceramic waste aggregate based on acoustic emission monitoring technology	125084
Li, Gengying / Morlor, Conteh Santigie / Leung, Christopher / Wang, Haiyang	Mechanical properties and fractal analysis of cement mortar incorporating styrene-butadiene rubber latex and carboxylated MWCNTs	125175
Cui, Kai / Lau, Denvid / Zhang, Yangyang / Chang, Jun	Mechanical properties and mechanism of nano-CaCO3 enhanced sulphoaluminate cement-based reactive powder concrete	125099
Yin, Shenghua / Hou, Yongqiang / Chen, Xin / Zhang, Minzhe	Mechanical, flowing and microstructural properties of cemented sulfur tailings backfill: Effects of fiber lengths and dosage	125058
Zheng, Wenhua / Wang, Hainian / You, Zhanping / Shao, Linlong / Golroo, Amir / Chen, Yu	Mechanism and rheological characterization of MDI modified Wood-Based Bio-Oil asphalt	125113
Zhang, Jinhua / Wu, Zhangyu / Zhang, Yadong / Fang, Qin / Yu, Hongfa / Jiang, Chunlin	Mesoscopic characteristics and macroscopic mechanical properties of coral aggregates	125125
Taheri, Shima / Giri, Paritosh / Ams, Martin / Bevitt, Joseph J. / Bustamante, Heriberto / Madadi, Mahyar / Kuen, Thomas / Gonzalez, Jose / Vorreiter, Louisa / Withford, Michael / Clark, Simon Martin	Migration and formation of an iron rich layer during acidic corrosion of concrete with no steel reinforcement	125105
Pichler, Mario / Haddadi, Bahram / Jordan, Christian / Harasek, Michael	Modeling the effective thermal conductivity of hollow bricks at high temperatures	125066
Chen, Xiaoguang / Gruyaert, Elke / Li, Jiabin	Modelling the effect of coarse recycled concrete aggregate on compressive strength of Portland cement concrete using volume fraction-based approach	125159
Onuaguluchi, Obinna / Banthia, Nemkumar / Gourlay, Keith / Minhas, Gurminder	Moisture transport and steel rebar corrosion in repair composites incorporating Nano-Fibrillated Cellulose (NFC)	125154
Tsolakis, Efstratios / Kalligeros, Christos / Tzouganakis, Panteleimon / Koulocheris, Dimitrios / Spitas, Vasilios	A novel experimental setup for the determination of the thermal expansion coefficient of concrete at cryogenic temperatures	125134
Yuan, Jing / Fang, Changhua / Chen, Qi / Fei, Benhua	Observing bamboo dimensional change caused by humidity	124988
Turco, Chiara / Paula Junior, Adilson C. / Teixeira, Elisabete R. / Mateus, Ricardo	Optimisation of Compressed Earth Blocks (CEBs) using natural origin materials: A systematic literature review	125140
Pan, Xiaoying / Gencturk, Bora	Optimized Self-Healing in concrete using engineered aggregates	124965
Baten, Bayezid / Manzur, Tanvir / Torsha, Tafannum / Alam, Shaurav	A parametric study on the graphical approach to assess corrosion vulnerability of concrete mixes in chloride environment	125115
Liu, Yunpeng / Yang, Chao / Wang, Fazhou / Hu, Shuguang / Zhu, Ming / Hu, Chuanlin / Lu, Linnu	Performance evaluation of regenerated clinker from completely recyclable mortar	125184
Zhang, Sumei / Huang, Zhenfeng / Guo, Lanhui	Performance of dovetail profiled steel concrete composite sandwich walls under axial compression	125090
Song, Ruimeng / Sha, Aimin / Shi, Ke / Li, Jiarong / Li, Xinzhou / Zhang, Fan	Polyphosphoric acid and plasticizer modified asphalt: Rheological properties and modification mechanism	125158
Wu, Chun-Ran / Hong, Zhi-Qiang / Zhan, Bao-Jian / Cui, Shi-Cai / Kou, Shi-Cong	Pozzolanic activity of calcinated low-grade natural sepiolite and its influence on the hydration of cement	125076
Fang, Yuan / Wang, Aoxuan / He, Keze / Pan, Hongying / Liao, Jiajun / Ding, Zhu / Xing, Feng / Le, Huirong / Wang, Xianfeng	Property evolution of geopolymer composites with SiC whiskers loaded with BN coating at elevated temperatures	125130
Alam, Shaurav / Manzur, Tanvir / Banjara, Ashlesh / Eklund, Sven / Radadia, Adarsh / Johnston, William / Hashm, Hawa / Williams, Joseph / Matthews, John	Rapid curing prospects of geopolymer cementitious composite using frontal polymerization of methyl methacrylate monomer	125198
Abdolpour, Hassan / Niewiadomski, Paweł / Sadowski, Łukasz	Recycling of steel fibres and spent equilibrium catalyst in ultra-high performance concrete: Literature review, research gaps, and future development	125147
Iorio, M. / Marra, F. / Santarelli, M. L. / González-Benito, J.	Reinforcement-matrix interactions and their consequences on the mechanical behavior of basalt fibers-cement composites	125103
Xu, Haiqin / Zou, Yingxue / Wu, Shaopeng / Li, Hechuan / Xu, Shi / Zhao, Yuechao / Lv, Yang	Research on gradient characteristics and its prediction method of induction heating asphalt concrete	124920
Huang, Zongxian / Liu, Kuisheng / Duan, Jinsong / Wang, Qiang	A review of waste-containing building materials: Characterization of the heavy metal	125107
Lim, Dong-Kyu / Choi, Myoung-Sung	Shrinkage and crack characteristics of filling materials under restrain stress in prefabricated structure connection	125188
Li, Hui / Wang, Fei / Zheng, Wukui	Study of a novel hollow ceramsite compounded with paraffin phase change materials for energy storage	125042
Abdelaziz, Amal / Martin, Amy Epps / Mercado, Edith Arámbula / Sobieski, Timothy	Study of the quantification of recycled binder activity in asphalt mixtures with RAP	125189
Li, Zhaolin / Yang, Fan / Yuan, Junjie / Cong, Lin / Yu, Meng	Study on preparation and pavement performance of polyurethane modified asphalt based on in-situ synthesis method	125196
Huang, Yichen / Gao, Liang / Zhong, Yanglong / Zhou, Chenyi	Study on the damage evolution of the joint and the arching deformation of CRTS-II ballastless slab track under complex temperature loading	125083
Cheng, Xiaowei / Chen, Zuwei / Gu, Tao / Zeng, Lingjia / Yao, Lin / Chen, Zhouyang / Huang, Kun / Zhang, Zhanwu / Zhang, Chunmei / Liu, Kaiqiang / Huang, Sheng	Study on the dynamic and static mechanical properties of microsphere rubber powder reinforced oil well cement composites	125145
Meroni, Fabrizio / Flintsch, Gerardo W. / Habbouche, Jhony / Diefenderfer, Brian K. / Giustozzi, Filippo	Three-level performance evaluation of high RAP asphalt surface mixes	125164
Tang, Jiyu / Ma, Wei / Pang, Yuyang / Fan, Jianchao / Liu, Dongxu / Zhao, Liangping / Sheikh, Shamim Ahmed	Uniaxial compression performance and stress–strain constitutive model of the aluminate cement-based UHPC after high temperature	125173
Heydari, Soheil / Hajimohammadi, Ailar / Haji Seyed Javadi, Nioushasadat / Khalili, Nasser	The use of plastic waste in asphalt: A critical review on asphalt mix design and Marshall properties	125185
Siahkouhi, Mohammad / Razaqpur, Ghani / Hoult, N. A. / Hajmohammadian Baghban, Mohammad / Jing, Guoqing	Utilization of carbon nanotubes (CNTs) in concrete for structural health monitoring (SHM) purposes: A review	125137
Behera, S. K. / Mishra, D. P. / Singh, Prashant / Mishra, K. / Mandal, Sujit K. / Ghosh, C. N. / Kumar, Ritesh / Mandal, Phanil K.	Utilization of mill tailings, fly ash and slag as mine paste backfill material: Review and future perspective	125120
Lugeiyamu, Lameck / Kunlin, Ma / Mensahn, Elvis S. K. / Faraz, Ahmad	Utilization of waste polyethylene terephthalate (PET) as partial replacement of bitumen in stone mastic asphalt	125176
Chu, Hongqiang / Wang, Tao / Han, Lin / Cao, Li / Guo, Ming-Zhi / Liang, Yunchao / Jiang, Linhua	Vickers hardness distribution and prediction model of cement pastes corroded by sulfate under the coexistence of electric field and chloride	125119

Über diese
Datenseite
IssueID
60033
Veröffentlicht am:
30.11.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - November 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - November 2021

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.