Construction and Building Materials - Oktober 2019

Erschienen:	Oktober 2019

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Figueira, R. B. / Sousa, R. / Coelho, L. / Azenha, M. / de Almeida, J. M. / Jorge, P. A. S. / Silva, C. J. R.	Alkali-silica reaction in concrete: Mechanisms, mitigation and test methods	903-931
Alneasan, Mahmoud / Behnia, Mahmoud / Bagherpour, Raheb	Analytical and numerical investigations of dynamic crack propagation in brittle rocks under mixed mode loading	544-555
Morcillo, M. / Díaz, I. / Cano, H. / Chico, B. / de la Fuente, D.	Atmospheric corrosion of weathering steels. Overview for engineers. Part II: Testing, inspection, maintenance	750-765
Ganter, Domenic / Mielke, Tommy / Maier, Marc / Lupascu, Doru C.	Bitumen rheology and the impact of rejuvenators	414-423
Martínez-Martínez, J. / Benavente, D. / Pérez-Huerta, A. / Cueto, N. / García-del-Cura, M. A.	Changes on the surface properties of foliated marbles at different cutting orientations	493-499
Pedroso, Marco / de Brito, Jorge / Silvestre, José Dinis	Characterization of walls with eco-efficient acoustic insulation materials (traditional and innovative)	892-902
Wei, Peixing / Wang, Brad Jianhe / Li, Hao / Wang, Libin / Peng, Si / Zhang, Long	A comparative study of compression behaviors of cross-laminated timber and glued-laminated timber columns	86-95
Essid, Nessrine / Loulizi, Amara / Neji, Jamel	Compressive strength and hygric properties of concretes incorporating microencapsulated phase change material	254-262
Tai, Yuh-Shiou / El-Tawil, Sherif	Computational investigation of twisted fiber pullout from ultra-high performance concrete	229-242
Amorim Júnior, Nilson S. / Silva, Guilherme A. O. / Dias, Cléber M. R. / Ribeiro, Daniel V.	Concrete containing recycled aggregates: Estimated lifetime using chloride migration test	108-118
Yi, Chaofan / Chen, Zheng / Bindiganavile, Vivek	Crack growth prediction of cement-based systems subjected to two-dimensional sulphate attack	814-828
Ghasemi, Mohsen / Rasekh, Haleh / Berenjian, Javad / AzariJafari, Hessam	Dealing with workability loss challenge in SCC mixtures incorporating natural pozzolans: A study of natural zeolite and pumice	424-436
Mi, Renjie / Pan, Ganghua / Li, Yang / Kuang, Tong / Lu, Xiaojun	Distinguishing between new and old mortars in recycled aggregate concrete under carbonation using iron oxide red	601-609
Shen, Dejian / Liu, Kaiqi / Wen, Chuyuan / Shen, Yongqiang / Jiang, Guoqing	Early-age cracking resistance of ground granulated blast furnace slag concrete	278-287
Kashi, Amin / Ramezanianpour, Ali Akbar / Moodi, Faramarz / Malekitabar, Hassan	Effect of aggressive marine environment on strain efficiency factor of FRP-confined concrete	882-891
Xu, Shanhua / Zhang, Zongxing / Li, Rou / Wang, Hao	Effect of cleaned corrosion surface topography on mechanical properties of cold-formed thin-walled steel	1-14
Naveed, Haris / ur Rehman, Zia / Khan, Ammad Hassan / Qamar, Sabih / Akhtar, Majid Niaz	Effect of mineral fillers on the performance, rheological and dynamic viscosity measurements of asphalt mastic	390-399
Liang, Guangwei / Zhu, Huajun / Zhang, Zuhua / Wu, Qisheng	Effect of rice husk ash addition on the compressive strength and thermal stability of metakaolin based geopolymer	872-881
Tsantilis, Lucia / Dalmazzo, Davide / Baglieri, Orazio / Santagata, Ezio	Effect of SBS molecular structure on the rheological properties of ternary nanomodified bituminous binders	183-192
Shekarchi, Mohammad / Farahani, Emadoddin Majdabadi / Oskouei, Asghar Vatani	Effect of seawater on pull-out behavior of glued-in single rods set parallel to the grain of timber joints	342-357
Fan, Kunjie / Li, Dawang / Li, Long-yuan / Wu, Jiayu	Effect of temperature gradient on transient thermal creep of heated and stressed concrete in transient state tests	839-851
Yin, Jicai / Zhang, Jianhua / Wang, Wenqiang	Effective resin content and its effect on the overall performance of polymer concrete for precision machine tools	203-212
Zhu, Ji-Hua / Zeng, Chaoqun / Su, Mei-Ni / Zeng, Zhi-wen / Zhu, Aizhu	Effectiveness of a dual-functional intervention method on the durability of reinforced concrete beams in marine environment	633-642
Pang, Sung-Jun / Jeong, Gi Young	Effects of combinations of lamina grade and thickness, and span-to-depth ratios on bending properties of cross-laminated timber (CLT) floor	142-151
Ceran, Özge Bildi / Şimşek, Barış / Doruk, Semahat / Uygunoğlu, Tayfun / Şara, Osman Nuri	Effects of dispersed and powdered silver nanoparticles on the mechanical, thermal, electrical and durability properties of cementitious composites	152-167
Zhou, Yingwu / Zheng, Bowen / Sui, Lili / Xing, Feng / Li, Pengda / Sun, Hongfang	Effects of external confinement on steel reinforcement corrosion products monitored by X-ray microcomputer tomography	531-543
Cao, Rongji / Zhao, Yulong / Gao, Ying / Huang, Xiaoming / Zhang, Lili	Effects of flow rates and layer thicknesses for aggregate conveying process on the prediction accuracy of aggregate gradation by image segmentation based on machine vision	566-578
Jiang, Jiwang / Ni, Fujian / Gu, Xingyu / Yao, Linyi / Dong, Qiao	Evaluation of aggregate packing based on thickness distribution of asphalt binder, mastic and mortar within asphalt mixtures using multiscale methods	717-730
Cao, Yawei / Street, Jason / Li, Minghao / Lim, Hyungsuk	Evaluation of the effect of knots on rolling shear strength of cross laminated timber (CLT)	579-587
Rais, M. S. / Shariq, M. / Masood, A. / Umar, A. / Alam, M. M.	An experimental and analytical investigation into age-dependent strength of fly ash mortar at elevated temperature	300-311
Dourado, N. / Pereira, F. A. M. / Lousada, J. L. / de Moura, M. F. S. F.	Experimental and numerical analyses of wood boards joining using wood-pin connectors	556-565
El-Houjeyri, I. / Thi, V-D. / Oudjene, M. / Khelifa, M. / Rogaume, Y. / Sotayo, A. / Guan, Z.	Experimental investigations on adhesive free laminated oak timber beams and timber-to-timber joints assembled using thermo-mechanically compressed wood dowels	288-299
Abirami, T. / Loganaganandan, M. / Murali, G. / Fediuk, Roman / Vickhram Sreekrishna, R. / Vignesh, T. / Januppriya, G. / Karthikeyan, K.	Experimental research on impact response of novel steel fibrous concretes under falling mass impact	447-457
Hossain, S. K. S. / Roy, P. K.	Fabrication of sustainable ceramic board using solid-wastes for construction purpose	26-40
Liu, Jinchun / Gao, Jiangang / Zhao, Qilin	Failure modes of CFRP pre-tightened single tooth joints under axial cyclic tensile loading	786-795
Yang, Kuo-Hsin / Wei, Shao-Bang / Adilehou, Williams Mathieu / Ho, Hao-Che	Fiber-reinforced internally unstable soil against suffusion failure	458-473
Li, Song / Ni, Fujian / Zhao, Zili / Dong, Qiao / Jiang, Jiwang / Zhao, Yanjing	Fractal evaluation of the rutting development for multilayer pavement by wheel tracking test	706-716
Son, Songsu / Said, Izak M. / Al-Qadi, Imad L.	Fracture properties of asphalt concrete under various displacement conditions and temperatures	332-341
Zhao, Renda / Yuan, Yuan / Cheng, Zhengqing / Wen, Tian / Li, Jian / Li, Fuhai / Ma, Zhongguo John	Freeze-thaw resistance of Class F fly ash-based geopolymer concrete	474-483
Ameri, Farshad / Shoaei, Parham / Zareei, Seyed Alireza / Behforouz, Babak	Geopolymers vs. alkali-activated materials (AAMs): A comparative study on durability, microstructure, and resistance to elevated temperatures of lightweight mortars	49-63
Li, Yue / Shen, Aiqin / Lyu, Zhenghua / Wang, Shifeng / Formela, Krzysztof / Zhang, Guangtai	Ground tire rubber thermo-mechanically devulcanized in the presence of waste engine oil as asphalt modifier	588-600
Negi, Prateek / Chhabra, Rajat / Kaur, Naveet / Bhalla, Suresh	Health monitoring of reinforced concrete structures under impact using multiple piezo-based configurations	371-389
Krishnan, Sreejith / Emmanuel, Arun C. / Bishnoi, Shashank	Hydration and phase assemblage of ternary cements with calcined clay and limestone	64-72
Wu, Jun / Deng, Yongfeng / Zheng, Xiaopei / Cui, Yujun / Zhao, Zhenping / Chen, Yonggui / Zha, Fusheng	Hydraulic conductivity and strength of foamed cement-stabilized marine clay	688-698
Saleh, Hosam M. / Eskander, Samir B.	Impact of water flooding on hard cement-recycled polystyrene composite immobilizing radioactive sulfate waste simulate	522-530
Ferrández, D. / Saiz, P. / Morón, C. / Dorado, M. G. / Morón, A.	Inductive method for the orientation of steel fibers in recycled mortars	243-253
Dejaeghere, Ines / Sonebi, Mohammed / De Schutter, Geert	Influence of nano-clay on rheology, fresh properties, heat of hydration and strength of cement-based mortars	73-85
Xu, Wenbin / Li, Qianlong / Zhang, Yalun	Influence of temperature on compressive strength, microstructure properties and failure pattern of fiber-reinforced cemented tailings backfill	776-785
Lagouin, Méryl / Magniont, Camille / Sénéchal, Pascale / Moonen, Peter / Aubert, Jean-Emmanuel / Laborel-Préneron, Aurélie	Influence of types of binder and plant aggregates on hygrothermal and mechanical properties of vegetal concretes	852-871
Kumbargeri, Yogesh Shamsunder / Boz, Ilker / Kutay, M. Emin	Investigating the effect of binder and aggregate application rates on performance of chip seals via digital image processing and sweep tests	213-221
Zhang, Jianchao / Dong, Biqin / Hong, Shuxian / Teng, Xiaojuan / Li, Gui / Li, Weiwen / Tang, Luping / Xing, Feng	Investigating the influence of fly ash on the hydration behavior of cement using an electrochemical method	41-48
Lau, Chee Keong / Rowles, Matthew R. / Parnham, Glenn N. / Htut, Trevor / Ng, Tian Sing	Investigation of geopolymers containing fly ash and ground-granulated blast-furnace slag blended by amorphous ratios	731-737
Kambham, Babu Sarath / Ram, V. Vinayaka / Raju, Sridhar	Investigation of laboratory and field aging of bituminous concrete with and without anti-aging additives using FESEM and FTIR	193-202
Wang, Yunyao / Shui, Zhonghe / Gao, Xu / Huang, Yun / Yu, Rui / Xiao, Xunguang	Modification on the chloride binding capacity of cementitious materials by aluminum compound addition	15-25
Sarker, Munawar / Dias-da-Costa, Daniel / Hadigheh, S. Ali	Multi-scale 3D roughness quantification of concrete interfaces and pavement surfaces with a single-camera set-up	511-521
Maia, J. / Ramos, Nuno M. M. / Veiga, R.	A new durability assessment methodology of thermal mortars applied in multilayer rendering systems	654-663
Tong, Zheng / Gao, Jie / Wang, Zhenjun / Wei, Yongfeng / Dou, Hui	A new method for CF morphology distribution evaluation and CFRC property prediction using cascade deep learning	829-838
Salehi, Hasan / Mazloom, Moosa	Opposite effects of ground granulated blast-furnace slag and silica fume on the fracture behavior of self-compacting lightweight concrete	622-632
Ameri, Farshad / Shoaei, Parham / Bahrami, Nasrollah / Vaezi, Mohammadsadegh / Ozbakkaloglu, Togay	Optimum rice husk ash content and bacterial concentration in self-compacting concrete	796-813
Gandia, Rômulo Marçal / Gomes, Francisco Carlos / Corrêa, Andréa Aparecida Ribeiro / Rodrigues, Maymiller Carvalho / Farinassi Mendes, Rafael	Physical, mechanical and thermal behavior of adobe stabilized with glass fiber reinforced polymer waste	168-182
Ortega, Francisco J. / Navarro, Francisco J. / Jasso, Martin / Zanzotto, Ludo	Physicochemical softening of a bituminous binder by a reactive surfactant (dodecenyl succinic anhydride, DSA)	766-775
Kaur, Ramanjit / Kothiyal, N. C.	Positive synergistic effect of superplasticizer stabilized graphene oxide and functionalized carbon nanotubes as a 3-D hybrid reinforcing phase on the mechanical properties and pore structure refinement of cement nanocomposites	358-370
Tugrul Tunc, Esra / Alyamaç, Kürşat Esat	A preliminary estimation method of Los Angeles abrasion value of concrete aggregates	437-446
Deng, L. / Ma, Y. / Hu, J. / Yin, S. / Ouyang, Xiao-yong / Fu, J. / Liu, A. / Zhang, Z.	Preparation and piezoresistive properties of carbon fiber-reinforced alkali-activated fly ash/slag mortar	738-749
El-Naggar, K. A. M. / Amin, Sh. K. / EL-Sherbiny, S. A. / Abadir, M. F.	Preparation of geopolymer insulating bricks from waste raw materials	699-705
Saberian, Mohammad / Shi, Long / Sidiq, Amir / Li, Jie / Setunge, Sujeeva / Li, Chun-Qing	Recycled concrete aggregate mixed with crumb rubber under elevated temperature	119-129
Gao, Yuan / Jing, Hongwen / Zhou, Zefu / Chen, Weiqiang / Du, Mingrui / Du, Yue	Reinforced impermeability of cementitious composites using graphene oxide-carbon nanotube hybrid under different water-to-cement ratios	610-621
Liu, Xiaoming / Qu, Shizhang / Huang, Jie	Relationship between physical properties and particle-size distribution of geomaterials	312-318
Lyra, Gabriela Pitolli / dos Santos, Valdemir / De Santis, Bruno Carlos / Rivaben, Rafael Ritez / Fischer, Clovis / Agnolon Pallone, Eliria Maria de Jesus / Rossignolo, João Adriano	Reuse of sugarcane bagasse ash to produce a lightweight aggregate using microwave oven sintering	222-228
Yazdanbakhsh, Ardavan / Tian, Yuan	Shear performance of reinforced concrete beams incorporating stiff slender elements	263-277
Matalkah, Faris / Soroushian, Parviz	Shelf life of alkali activated cement: Effects of storage condition and duration	664-672
Kuang, Dongliang / Liu, Yanjin / Niu, Changchang / Chen, Huaxin	Study on design and optimization of novelty asphalt rejuvenator composition based on crystal nucleus dispersion theory	319-331
Fan, Yongli / Song, Shaolei / Huang, Jizhong / Lu, Yi / Liu, Jingbo / Zhen, Qiang / Bashir, Sajid	Study on weathering mechanism of masonry bricks of ancient temples in Shanxi province using Dingxiang Hongfu temple masonry brick	500-510
Ralkhal, Sadegh / Shahrabi, Taghi / Ramezanzadeh, Bahram	Synthesis and construction of a highly potent hybrid organic/inorganic anti-corrosive pigment for effective corrosion control of mild steel in simulated seawater	400-413
Sun, Yu / Yu, Rui / Shui, Zhonghe / Wang, Xinpeng / Qian, Diao / Rao, Biyun / Huang, Jie / He, Yongjia	Understanding the porous aggregates carrier effect on reducing autogenous shrinkage of Ultra-High Performance Concrete (UHPC) based on response surface method	130-141
Li, Bo / Zhang, Shizhe / Li, Qiu / Li, Neng / Yuan, Bo / Chen, Wei / Brouwers, H. J. H. / Yu, Qingliang	Uptake of heavy metal ions in layered double hydroxides and applications in cementitious materials: Experimental evidence and first-principle study	96-107
Garilli, Erika / Autelitano, Federico / Giuliani, Felice	Use of bending beam rheometer test for rheological analysis of asphalt emulsion-cement mastics in cold in-place recycling	484-492
Tahami, Seyed Amid / Foroutan Mirhosseini, Ali / Dessouky, Samer / Mork, Helge / Kavussi, Amir	The use of high content of fine crumb rubber in asphalt mixes using dry process	643-653
Luhar, Salmabanu / Cheng, Ta-Wui / Nicolaides, Demetris / Luhar, Ismail / Panias, Dimitris / Sakkas, Konstantinos	Valorisation of glass wastes for the development of geopolymer composites – Durability, thermal and microstructural properties: A review	673-687

Über diese
Datenseite
IssueID
28454
Veröffentlicht am:
24.06.2019
Geändert am:
26.07.2019

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Construction and Building Materials - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Construction and Building Materials - Oktober 2019

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.