Case Studies in Construction Materials - Juli 2023

Erschienen:	Juli 2023

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Khan, Shoukat Alim / Jassim, Muhammad / Ilcan, Husyin / Şahin, Oğuzhan / Bayer, İsmail Raci / Şahmaran, Mustafa / Koç, Muammer	3D printing of circular materials: Comparative environmental analysis of materials and construction techniques	e02059
Vergara, Luis A. / Perez, Juan F. / Colorado, Henry A.	3D printing of ordinary Portland cement with waste wood derived biochar obtained from gasification	e02117
Wang, Can / Hou, Jing / Chen, Yun-Min / Ye, Xiao-Wei / Chu, Wei-Jiang	A 3D rotational silo-torus model for face stability analysis of circular tunnels	e01736
Chen, Zhonggou / Zhang, Guoyi / He, Rui / Tian, Zushi / Fu, Chuanqing / Jin, Xianyu	Acoustic emission analysis of crack type identification of corroded concrete columns under eccentric loading: A comparative analysis of RA-AF method and Gaussian mixture model	e02021
Ouma, Justus / Ongwen, Nicholas / Ogam, Erick / Auma, Mercy / Fellah, Z. E. A. / Mageto, Maxwell / Mansour, Mohamed Ben / Oduor, Andrew	Acoustical properties of compressed earth blocks: Effect of compaction pressure, water hyacinth ash and lime	e01828
Li, Bo / Han, Jie / Nan, Xueli / Li, Xiaolan / Li, Xiaomin / Zhang, Peng	Adhesion characteristics and spectroscopic analysis of regenerated ultraviolet aged asphalt binder using waste vegetable oil	e01853
Ambrus, Mária / Mucsi, Gábor	Advanced Processing of High Ca Fly Ash for Enhanced Reactivity and Improved High Value-Added Application Possibilities	e02214
Klyuev, Aleksandr / Kashapov, Nail / Klyuev, Sergey / Ageeva, Marina / Fomina, Ekaterina / Sabitov, Linar / Nedoseko, Igor / Vatin, Nikolai Ivanovich / Kozlov, Pavel / Vavrenyuk, Svetlana	Alkali-activated binders based on technogenic fibrous waste	e02202
Sun, Tao / Fan, Jun / Ouyang, Gaoshang / Xu, Fang / Wang, Ziyan / Yin, Weisong / Li, Wanmin	Alkali-activated slag mortar molded by non-stirring molding: Compressive strength, hydration properties and microstructures	e02135
Roja, K. Lakshmi / Yamani, Hassan / Sadeq, Mohammed / Masad, Eyad	Analysis of performance of asphalt pavements in Qatar using mechanistic-empirical approaches	e01708
Tursunkululy, Timur / Zhangabay, Nurlan / Suleimenov, Ulanbator / Abshenov, Khassen / Utelbayeva, Akmaral / Moldagaliyev, Arman / Kolesnikov, Alexandr / Turashova, Zhansaya / Karshyga, Galymzhan / Kozlov, Pavel	Analysis of strength and eigenfrequencies of a steel vertical cylindrical tank without liquid, reinforced by a plain composite thread	e02019
Zhangabay, Nurlan / Tagybayev, Askhat / Utelbayeva, Akmaral / Buganova, Svetlana / Tolganbayev, Akzhan / Tulesheva, Gulnara / Jumabayev, Atogali / Kolesnikov, Alexandr / Kambarov, Medetbek / Imanaliyev, Kuanysh / Kozlov, Pavel	Analysis of the influence of thermal insulation material on the thermal resistance of new facade structures with horizontal air channels	e02026
Li, Chen / Li, Sheng-cai / Yue, Kong / Wu, Peng / Xiao, Zhong-ping / Zhang, Jun	Analytical solutions and optimization design for bending behavior of cross-laminated timber beams considering orthotropy and interface slip	e01948
Chaiyaput, Salisa / Ayawanna, Jiratchaya / Jongpradist, Pornkasem / Poorahong, Hatairat / Sukkarak, Raksiri / Jamsawang, Pitthaya	Application of a cement–clay–air foam mixture as a lightweight embankment material for construction on soft clay	e02188
Zhang, Qipeng / Gu, Xingyu / Liang, Jia / Yu, Zilu / Dong, Qiao / Jiang, Jiwang	Application of a stochastic damage model to predict the variability of creep behavior for asphalt mixtures	e02078
Li, Yiming / Lv, Chenyang / Cheng, Peifeng / Chen, Yanjun / Zhang, Zhanming	Application of bio-resin in road materials: Rheological and chemical properties of asphalt binder modified by lignin-phenolic resin	e01989
Yabo, Chai / Ning, Luo / Haohao, Zhang / Yujie, Duan / gongyu, Mou / Weifu, Sun / Jiwei, Dong	Application of controlled blasting demolition technology in ultra-high coaxial thin-walled steel inner cylinder reinforced concrete chimney	e01936
Kong, Y. K. / Kurumisawa, Kiyofumi	Application of machine learning in predicting workability for alkali-activated materials	e02173
Lu, Pengzhen / Wang, Jiahao / Ye, Kai / Wu, Ying / Ding, Jiarui / Qi, Zhenyi	Asphalt plug joint geometric analysis and improvement	e02011
Yang, Shu-Rong / Chen, Xing-Rong	Assessing rainfall-induced wetting band depth for stability analysis of unsaturated soil slopes	e02180
Silva, Webert B. C. / Barroso, Suelly H. A. / Cabral, A. Eduardo B. / Stefanutti, Ronaldo / Picado-Santos, Luis G.	Assessment of concrete road paving blocks with coal bottom ash: Physical and mechanical characterization	e02094
Almusawi, Ali / Shoman, Sarmad / Lupanov, Andrei P.	Assessment of the effectiveness and the initial cost efficiency of hot recycled asphalt using polymer modified bitumen	e02145
Ducasse-Lapeyrusse, Jean / Bouteiller, Véronique / Marie-Victoire, Elisabeth / Bouichou, Myriam / Damien, Guillaume / Martinet, Victor / Annede-Villeau, Camille / Lesieutre, Olivier	Assessment of the Impressed Current Cathodic Protection system after 4 years operation: Case study of the Saint-Cloud Viaduct (France)	e02023
Lee, Sang-Yum / Yang, Sung-Lin / Le, Tri Ho Minh	Assessment on the applicability of heavy oil advanced refining byproducts for bituminous road pavements	e01788
Li, Changjiao / Jiang, Dongbing / Li, Xiangguo / Lv, Yang / Wu, Kai	Autogenous shrinkage and hydration property of cement pastes containing rice husk ash	e01943
Cui, Taotao / Ning, Baokuan / Shi, Xinxin / Li, Jinyu / Li, Anqi	Axial tensile behavior of hybrid steel-polypropylene fiber reinforced high-strength lightweight concrete	e02134
Han, Gang / Zhang, Hui / Wang, Zherun / Wang, Yanyan / Geng, Ningning / Guo, Panpan / Li, Xian / Zhao, Yanlin / Lin, Hang / Wang, Yixian	Bearing behavior of rock socketed pile in limestone stratum embedded with a karst cavity beneath pile tip	e02203
El-Sayed, Taha A. / Shaheen, Yousry B. / AbouBakr, Mohamed M. / Abdelnaby, Ragab M.	Behavior of ferrocement water pipes as an alternative solution for steel water pipes	e01806
Aldmour, Rama / Shatarat, Nasim / Abdel-Jaber, Mu’tasim	Biaxial shear behavior of recycled concrete aggregate reinforced concrete beams	e02127
Maglad, Ahmed M. / Houda, Moustafa / Alrowais, Raid / Khan, Abdul Mateen / Jameel, Mohammed / Rehman, Sardar Kashif Ur / Khan, Hamza / Javed, Muhammad Faisal / Faisal Rehman, Muhammad	Bim-based energy analysis and optimization using insight 360 (case study)	e01755
Jin, Liu / Liu, Kaixin / Zhang, Renbo / Yu, Wenxuan / Du, Xiuli	Bond behavior between steel bar and concrete considering cryogenic temperatures and confinement	e01856
Jin, Dongzhao / Ampadu Boateng, Kwadwo / Ge, Dongdong / Che, Tiankai / Yin, Lei / Harrall, Wayne / You, Zhanping	A case study of the comparison between rubberized and polymer modified asphalt on heavy traffic pavement in wet and freeze environment	e01847
Lauermannová, Anna-Marie / Jankovský, Ondřej / Sedmidubský, David / Lojka, Michal / Pavlíková, Milena / Pivák, Adam / Záleská, Martina / Pavlík, Zbyšek	Case study on MOC composites enriched by foamed glass and ground glass waste: Experimental assessment of material properties and performance	e01836
Zhao, Minglei / Dai, Manman / Li, Jie / Li, Changyong	Case study on performance of pumping concrete with super-fine river-sand and manufactured-sand	e01850
Ali, Mujahid / Kumar, Abhinav / Yvaz, A. / Salah, Bashir	Central composite design application in the optimization of the effect of pumice stone on lightweight concrete properties using RSM	e01958
Frýbort, Aleš / Štulířová, Jana / Grošek, Jiří / Gregerová, Miroslava	Changes in the chemical composition of silica fume in the concrete composite system	e01916
Pańcikiewicz, Krzysztof / Maslak, Mariusz / Pazdanowski, Michał / Stankiewicz, Marek / Zajdel, Paulina	Changes in the microstructure of selected structural alloy steel grades identified after their simulated exposure to fire temperature	e01923
Alyousef, Rayed / Abbass, Wasim / Aslam, Fahid / Gillani, Syed Asad Ali	Characterization of high-performance concrete using limestone powder and supplementary fillers in binary and ternary blends under different curing regimes	e02058
Chen, Songqiang / Xu, Li / Jia, Shengqiang / Wang, Jinchang	Characterization of the nonlinear viscoelastic constitutive model of asphalt mixture	e01902
Shah, Syed Nasir / Mo, Kim Hung / Yap, Soon Poh / Radwan, Mohammed K. H. / El-Shafie, Ahmed	Chemically treated silica aerogel for the use in lightweight cementitious composite	e01742
Kim, G. M. / Park, S. M. / Park, S. W.	Chloride removal of calcium aluminate cements: Reaction and physicochemical characteristics	e01975
Jiao, Zhenzhen / Li, Xueying / Yu, Qinglin / Yao, Qinqin / Guan, Xinchun / Hu, Ping	Chloride resistance of class C/class F fly ash-based geopolymer mortars with different strength grades	e01811
El-said, Amr / Deifalla, Ahmed F. / Yousef, Saif Eldeen A. S. / El-Sayed, Taha A. / Tawfik, Maged / Ayash, Nehal M.	Code provisions evaluation for the punching shear capacity of R.C footings without reinforcement for punching shear	e02182
Zhang, Zhiwei / Wang, Huajie / Qian, Hongliang / Feng, Qiu / Jin, Xiaofei / Fan, Feng	Comparative analysis and applicability of corrosion test methods for construction steel components	e02034
Kumar, Dileep / Alam, Morshed / Sanjayan, Jay / Harris, Muhammad	Comparative analysis of form-stable phase change material integrated concrete panels for building envelopes	e01737
Ma, Wenguan / Liu, Xin / Qiu, Xu / Zhou, Yiming / Liu, Yangui / Fu, Wangan / Guo, Xiaojiang / Qian, Zelun / Du, Kaizhe / Cai, Jianguo	Comparative folding/unfolding performance of notch-type compliant joints	e01760
Alaskar, Abdulaziz / Alfalah, Ghasan / Althoey, Fadi / Abuhussain, Mohammed Awad / Javed, Muhammad Faisal / Farouk Deifalla, Ahmed / Ghamry, Nivin A.	Comparative study of genetic programming-based algorithms for predicting the compressive strength of concrete at elevated temperature	e02199
Gao, Shan / Li, Jieqi / Wang, Wei / Zhang, Mingming / Rong, Chuanxin	A comparative study of mechanical and environmental properties of concrete using jujube nucleus as a coarse aggregate	e02013
Wang, Meng / Zhao, Guoyan / Liang, Weizhang / Wang, Ning	A comparative study on the development of hybrid SSA-RF and PSO-RF models for predicting the uniaxial compressive strength of rocks	e02191
Chen, Tao / Wang, Zhihang / Wang, Ang / Bai, Erlei / Zhu, Xiang	Comparative study on the static and dynamic mechanical properties and micro-mechanism of carbon fiber and carbon nanofiber reinforced concrete	e01827
Jin, Dongzhao / Yin, Lei / Xin, Kai / You, Zhanping	Comparison of Asphalt Emulsion-Based Chip Seal and Hot Rubber Asphalt-Based Chip Seal	e02175
Danish, Aamar / Mosaberpanah, Mohammad Ali / Ozbakkaloglu, Togay / Salim, Muhammad Usama / Khurshid, Kiran / Bayram, Muhammed / Amran, Mugahed / Fediuk, Roman / Qader, Diyar N.	A compendious review on the influence of e-waste aggregates on the properties of concrete	e01740
Pan, Zuanfeng / Si, Doudou / Tao, Jinghong / Xiao, Jianzhuang	Compressive behavior of 3D printed concrete with different printing paths and concrete ages	e01949
Zhao, Hongchao / Ren, Ting / Remennikov, Alex / Zeng, Junjie	Compressive behaviour of lump-grout material under lateral confinement: Laboratory tests	e02075
Lin, Lang / Xu, Jinjun / Yuan, Jialiang / Yu, Yong	Compressive strength and elastic modulus of RBAC: An analysis of existing data and an artificial intelligence based prediction	e02184
Liu, Gaoyang / Sun, Bochao	Concrete compressive strength prediction using an explainable boosting machine model	e01845
Ahmad, Jawad / Arbili, Mohamed Moafak / Alabduljabbar, Hisham / Farouk Deifalla, Ahmed	Concrete made with partially substitution corn cob ash: A review	e02100
Silva, Carla Mabel Medeiros de Albuquerque e. / Pereira, Mara Monaliza Linhares / Silva Capuzzo, Valdirene Maria / de Brito, Jorge	Concrete produced with recycled concrete aggregate exposed to treatment methods	e01938
Law, David	Concrete repair	e02210
Lin, Shengjian / Zheng, Yanjin / Liu, Wenbiao / Ma, Hang / Rao, Feng / Yang, Lang / Zhong, Shuiping	Consolidation of phosphorus tailings and soluble fluorine & phosphorus with calcium carbide residue-mirabilite waste as a green alkali activator	e01779
Ji, Yongcheng / Wang, Dayang	Constitutive model of waste brick concrete based on Weibull strength theory	e01738
Khadka, Suraj D. / Okuyucu, Osman / Jayawickrama, Priyantha W. / Senadheera, Sanjaya	Controlled low strength materials (CLSM) activated with alkaline solution: Flowability, setting time and microstructural characteristics	e01892
Hang, Meiyan / Zhou, Xuebin / Wang, Jiechao / Sun, Mengjie	Corrosion behavior and mechanism analysis of triethanolamine and imidazoline in the simulated pore solution of concrete	e01907
Zhou, Chang / Wang, Wenwei / Zheng, Yuzhou / Cheng, Yi / Wu, Zenghan	Crashworthiness design of GFRP bar reinforced concrete bridge pier subjected to truck collision	e02205
Zhang, Qingyu / Luo, Jing / Yang, Zhen / Wang, Jia / Zhao, Yi / Zhang, Yanjuan	Creep and fatigue properties of asphalt mastic with steel slag powder filler	e01743
Xue, Weichen / Huang, Qian / Yang, Jialin / Li, Zhijie	Cyclic response of precast concrete shear walls with reduced grouted sleeves or corrugated metallic duct splices	e01822
Xia, DongTao / Yu, Shiting / Yu, Jiali / Feng, Chenlu / Li, Biao / Zheng, Zhi / Wu, Hao	Damage characteristics of hybrid fiber reinforced concrete under the freeze-thaw cycles and compound-salt attack	e01814
Santos, Lara Monalisa Alves dos / Zanoni, Vanda Alice Garcia / Bedin, Eduardo / Pistori, Hemerson	Deep learning applied to equipment detection on flat roofs in images captured by UAV	e01917
Dong, Qiao / Cao, Xinyuan / Wang, Sike / Chen, Xueqin / Yang, Bohan / Xie, Shengjia / Cheng, Zhiqiang	Design and evaluation of an innovative composite silicate-based surface treatment agent of concrete	e02207
Pushpakumara, B. H. J. / Fernando, M. S. G. M.	Deterioration assessment model for splash zone of marine concrete structures	e01731
Nogueira, Caio Gorla / Yoshio, Lucas / Zacchei, Enrico	Deterministic and probabilistic approaches for corrosion in RC structures: A direct proposed model to total service life predictions	e01913
Navabi, Danial / Amini, Zahra / Rahmati, Alireza / Tahbaz, Mansooreh / Butt, Talib E. / Sharifi, Sarvenaz / Mosavi, Amir	Developing light transmitting concrete for energy saving in buildings	e01969
Yang, Zhihao / Yang, Hailu / Wang, Linbing / Cao, Dongwei	The development and application of an interfacial cohesive zone model of the pavement interlayer considering the characteristics of adhesive materials	e01775
Shilar, Fatheali A. / Ganachari, Sharanabasava V. / Patil, Veerabhadragouda B. / Almakayeel, Naif / Yunus Khan, T. M.	Development and optimization of an eco-friendly geopolymer brick production process for sustainable masonry construction	e02133
Nukah, Promise D. / Abbey, Samuel J. / Booth, Colin A. / Nounu, Ghassan	Development of a Lytag-silica fume based lightweight concrete and corresponding design equation for pure bending	e01970
Li, Shuobiao / Ding, Wenqi / Zhang, Qingzhao	Development of a new temperature-dependent yield criterion for stainless and high-strength alloy steels in construction engineering	e02149
Ayasrah, Usama B. / Tashman, Laith / AlOmari, Aslam / Asi, Ibrahim	Development of a temperature prediction model for flexible pavement structures	e01697
Liao, Shixiong / Ma, Kun / Wu, Lei / Zhao, Zhiman / Quan, Sicheng	Development of artificial shape-setting energy storage phosphorous building gypsum aggregate	e02016
Kang, Choonghyun / Kim, Taewan	Development of construction materials using red mud and brine	e02185
Cai, Xinhua / Yang, Duo / Zhang, Duo / Cui, Jinyang / Wang, Weikang / Liu, Lei	Development of high-early-strength low-carbon engineered cementitious composites with calcium sulfoaluminate cement incorporating high-volume fly ash	e01959
Redondo-Mosquera, Jesús D. / Sánchez-Angarita, David / Redondo-Pérez, Marcela / Gómez-Espitia, Juan C. / Abellán-García, Joaquín	Development of high-volume recycled glass ultra-high-performance concrete with high C3A cement	e01906
Li, Bo / Liu, Wanying / Nan, Xueli / Yang, Jun / Tu, Chongzhi / Zhou, Lu	Development of rejuvenator using waste vegetable oil and its influence on pavement performance of asphalt binder under ultraviolet aging	e01964
Khedr, Safwan / Saudy, Maram	Development of superpave regional implementation framework in developing countries with hot and arid climates: Egyptian case study	e01772
Abdellatief, Mohamed / AL-Tam, Saeeb M. / Elemam, Walid E. / Alanazi, Hani / Elgendy, Gamal M. / Tahwia, Ahmed M.	Development of ultra-high-performance concrete with low environmental impact integrated with metakaolin and industrial wastes	e01724
Kazmi, Syed Minhaj Saleem / Munir, Muhammad Junaid / Wu, Yu-Fei / Lin, Xiaoshan / Ashiq, Syed Zishan	Development of unified elastic modulus model of natural and recycled aggregate concrete for structural applications	e01873
Wang, Gang / Qiao, Shifian / Li, Guyang / Singh, Jenisha	Direct shield cutting of large-diameter reinforced concrete group piles: Case study on Shenyang Metro construction	e01864
Wu, Junqing / Jia, Zhaolin / Zhou, Xiaolin	Discrete element analysis of the effect of aggregate morphology on the flowability of self-compacting concrete	e02010
Zhou, Juanlan / Zheng, Mulian / Zhan, Qiwei / Zhou, Rubing / Zhang, Yongsheng / Wang, Yaqi	Discrete element modelling of the uniaxial compression behavior of pervious concrete	e01937
Liu, Yu / Xu, Xinnan / Huang, Zirun / Zhao, Mohan	Discrete-continuous coupling simulation and analysis for asphalt pavement dynamic stress responses under a moving wheel load	e01932
Frasson, Bruna Juvêncio / Cavalcante Rocha, Janaíde	Drying shrinkage behavior of geopolymer mortar based on kaolinitic coal gangue	e01957
Fang, Yu / Yao, Zhishu / Huang, Xianwen / Li, Xinwei / Xu, Yongjie / Hu, Kun / Shu, Siyuan	Durability analysis and damage constitutive modeling of fiber-reinforced reactive powder concrete of drilling shaft in porous water-bearing rock stratum	e01911
Santarsiero, Giuseppe / Picciano, Valentina	Durability enhancement of half-joints in RC bridges through external prestressed tendons: The Musmeci Bridge’s case study	e01813
Yoon, Sanghyuck / Jeon, Chansoo / Choi, Wonyoung	Durability of blast-furnace slag concrete mixed with expansive and swelling admixtures	e02179
Zhang, Maohua / Du, Lin / Li, Zhiyi / Xu, Ronghua	Durability of marine concrete doped with nanoparticles under joint action of Cl- erosion and carbonation	e01982
Wang, Shaoquan / Xu, Yanliang / Liu, Manyu / Gao, Ying / Jia, Yanshun / Li, Yingsong / Chen, Zeqi / Wei, Ziyao	Dynamic behavior of crack sealant bonding interface in the asphalt pavement crack repair structure under moving vehicle load	e01821
Akhtar, Ahmed Yar / Tsang, Hing-Ho	Dynamic properties of recycled polyurethane-coated rubber-soil mixtures	e01859
Wang, Fei / Gao, Shi-bo / Zhao, Zhuo / Zhang, Zhe / Cai, Yu-Liang / Ma, Bo-han	Early Hydration Heat Temperature Field of Precast Concrete T-beam under Steam Curing：Experiment and Simulation	e02067
Min, Chendi / Xiong, Shuai / Shi, Ying / Liu, Zhixiang / Lu, Xinyue	Early-age compressive strength prediction of cemented phosphogypsum backfill using lab experiments and ensemble learning models	e02107
de Oliveira Júnior, Juvenil Nunes / Lopes, Felipe Perissé Duarte / Simonassi, Noan Tonini / Lopera, Henry Alonso Colorado / Monteiro, Sergio Neves / Vieira, Carlos Maurício Fontes	Ecofriendly panels for building with eucalyptus sawdust and vegetal polyurethane resin: A mechanical evaluation	e01839
Zhou, Haijun / Qi, Xuan / Ma, Cong / Fang, Zefeng / Lou, Jianing / Chen, Haoyang / Guo, Xiang	Effect and mechanism of composite early-strength agents on sulfoaluminate cement-based UHPC	e01768
Xu, Shuqiang / Wang, Julin / Ma, Qinglin / Wang, Lele / Zhang, Tao	Effect and mechanism of two different types of waterproof admixtures and silica fume on the hydration and mechanical properties of natural hydraulic lime	e01925
Yang, Yibo / Chen, Baixi / Chen, Yong / Liu, Fucai / Xie, Xiangming / Guo, Wenying / Wang, Hengchang	Effect of admixtures and PVA fiber on the mechanical properties of high strength cementitious grout	e01884
Khasawneh, Mohammad Ali / Sawalha, Ansam Adnan / Aljarrah, Mohannad Theeb / Alsheyab, Mohammad Ahmad	Effect of Aggregate Gradation and Asphalt Mix Volumetrics on the Thermal Properties of Asphalt Concrete	e01725
Kumar, Doma Hemanth / Chinnabhandar, Raghuram K. / Chiranjeevi, Kondeti / Shankar, A. U. Ravi	Effect of aggregate gradation and bitumen type on mechanical properties of semi-flexible asphalt mixtures	e02025
Muhammad, Jaza Hassan / Yousif, Ali Ramadhan	Effect of basalt minibars on the shear strength of BFRP-reinforced high-strength concrete beams	e02020
Alomayri, Thamer / Ali, Babar / Raza, Syed Safdar / El Hachem, Chady / Ahmed, Hawreen / Azab, Marc	Effect of binder strengthening using micro-silica on mechanical and absorption characteristics of HPC reinforced with reclaimed jute fibres	e02085
Bakr, Mohd Abu / Singh, Birendra Kumar	Effect of biomineralized Bacillus subtilis on recycled aggregate concrete containing blended hydrated lime and brick powder	e02137
Du, Jiegui / Jin, Yuye / Hou, Shuguang / Jin, Rui / Wang, Qianqian	Effect of component characteristics on mechanical properties of asphalt: A molecular dynamics study	e02007
Ghorbani, Saeid / Sun, Yubo / Mohan, Manu K. / Matthys, Stijn	Effect of copper and stainless steel slags on fresh, mechanical and pore structure properties of alkali activated ground granulated blast furnace slag	e01981
Wang, Zhikai / Wang, Yiming / Zhang, Minzhe / Wu, Aixiang / Ruan, Zhuen / Yu, Guangyi	Effect of curing pressure on the stability of bottom cemented paste backfill under different types of barricade	e01732
Zhang, Jingshuang / Shu, Yonghua / Fang, An-Nan / Qin, Ruihan / Wu, Yanqing / Zhang, Junjie	Effect of dry-wet cycle on dynamic mechanical characteristics of EPS cement soil under different chloride salt environments	e02151
Dahish, Hany A. / Almutairi, Ahmed D.	Effect of elevated temperatures on the compressive strength of nano-silica and nano-clay modified concretes using response surface methodology	e02032
Orouji, Maedeh / Najaf, Erfan	Effect of GFRP rebars and polypropylene fibers on flexural strength in high-performance concrete beams with glass powder and microsilica	e01769
Rasmus, Juho / Ohenoja, Katja / Kinnunen, Paivo / Illikainen, Mirja	Effect of green liquor dregs as an alkali source for alkali-activated blast furnace slag mortar	e01950
Laxmi, G. / Patil, Suresh / Hossiney, Nabil / Thejas, H. K.	Effect of hooked end steel fibers on strength and durability properties of ambient cured geopolymer concrete	e02122
Dahish, Hany A. / Alfawzan, M. S. / Tayeh, Bassam A. / Abusogi, Maha A. / Bakri, Mudthir	Effect of inclusion of natural pozzolan and silica fume in cement - based mortars on the compressive strength utilizing artificial neural networks and support vector machine	e02153
Abdo, Ayman / Ahmed, Sayed / Selim, Mohamed / Sharaky, I. A.	Effect of main and NSM reinforcing materials on the behavior of the shear strengthened RC beams with NSM reinforced HSC layers and bars	e02109
Saedi, Alieh / Jamshidi-Zanjani, Ahmad / Mohseni, Mehdi / Khodadadi Darban, Ahmad	Effect of mechanochemical activation on hydration properties of lead-zinc sulfide tailings for concrete construction	e01996
Sun, Yin-Lei / Ma, Si-Teng / Kuang, Yan-Wen / Xie, Jian-Bin	Effect of mineral compositions on mechanical properties of granite residual soil	e02140
Ziari, Hassan / Hajiloo, Mojtaba	The effect of mix design method on performance of asphalt mixtures containing reclaimed asphalt pavement and recycling agents: Superpave versus balanced mix design	e01931
Zhou, Yaming / Zhang, Jianhai / Zhang, Ru / Liu, Enlong / Xue, Xinhua / Xing, Xianglin / Zhang, Qianjin	Effect of nano-Al2O3/epoxy resin composite on the shear strength recovery of fractured rock masses with various crack widths and SCA interfacial treatments	e01715
Hwangbo, Dongsun / Son, Dong-Hee / Suh, Heongwon / Sung, Jaebum / Bae, Baek-Il / Bae, Sungchul / So, Hongyun / Choi, Chang-Sik	Effect of nanomaterials (carbon nanotubes, nano-silica, graphene oxide) on bond behavior between concrete and reinforcing bars	e02206
Dai, Kuangyu / Li, Shengli / Hu, Pengyue / Jiang, Nan / Wang, Dongwei	Effect of outer rust layer on cathodic protection and corrosion behavior of high-strength wire hangers with sheath crack in marine rainfall environment	e02043
Kim, Kyeong Woo / Park, Kyu Tae / Ates, Fatmanur / Kim, Hong Gi / Woo, Byeong-Hun	Effect of pretreated biomass fly ash on the mechanical properties and durability of cement mortar	e01754
Wang, Lusheng / Shen, Aiqin / Mou, Ge / Guo, Yinchuan / Meiquan, Yang	Effect of RAP gradation subdivision and addition of a rejuvenator on recycled asphalt mixture engineering performance	e02136
Lee, Jae-In / Choi, Se-Jin	Effect of replacement ratio of ferronickel slag aggregate on characteristics of cementitious mortars at different curing temperatures	e01882
Cheng, Hao / Chen, Pang / Rong, Xian / Cao, Shaojun / Zhao, Wenzhong	Effect of steel fibre and manufactured sand on mechanical properties of alkali-activated slag green cementitious material after high temperature	e01919
Yan, Rongfu / Yin, Shenghua / Zhang, Haisheng / Wang, Leiming / Chen, Dapeng	Effect of superplasticizer on the setting behaviors and mechanical properties of tailings-waste rock cemented paste backfills	e01714
Kenéz, Attila Zsolt / Földes, Tamás / Lublóy, Éva	Effect of surface cleaning on seam quality of laser beam welded mixed joints	e01904
Li, Hong-Feng / Yu, Qian-Qian / Zhang, Kun / Wang, Xiao-Yong / Liu, Yao / Zhang, Guang-Zhu	Effect of types of curing environments on the self-healing capacity of mortars incorporating crystalline admixture	e01713
Tayeh, Bassam A. / Hakamy, Ahmad A. / Fattouh, Mohy S. / Mostafa, Sahar A.	The effect of using nano agriculture wastes on microstructure and electrochemical performance of ultra-high-performance fiber reinforced self-compacting concrete under normal and acceleration conditions	e01721
Abd-Elrahman, Mahmoud H. / Agwa, Ibrahim Saad / Elsakhawy, Yara / Rizk, Mostafa S.	Effect of utilising ferrosilicon and recycled steel fibres on ultra-high-strength concrete containing recycled granite	e01903
Hakimelahi, Nima / Bayat, Meysam / Ajalloeian, Rassoul / Nadi, Bahram	Effect of woven geotextile reinforcement on mechanical behavior of calcareous sands	e02014
Raut, Ashwin Narendra / Adamu, Musa / Khed, Veerendrakumar C. / Murmu, Anant Lal / Ibrahim, Yasser E.	Effects of agro-industrial by-products as alumina-silicate source on the mechanical and thermal properties of fly ash based-alkali activated binder	e02070
Cai, Jun / Li, Wangzhou / Wang, Zhihua / Yu, Huanan / Li, Rui / Wang, Chengchao	Effects of coupling graft graphene fluid on modifying asphalt binders: Preparation, characterization and performance validation	e02165
Abdoli, Farshid / Rashidi, Maria / Rostampour-Haftkhani, Akbar / Layeghi, Mohammad / Ebrahimi, Ghanbar	Effects of fastener type, end distance, layer arrangement, and panel strength direction on lateral resistance of single shear lap joints in cross-laminated timber (CLT)	e01727
Jaradat, Yaser / Matalkah, Faris	Effects of micro silica on the compressive strength and absorption characteristics of olive biomass ash-based geopolymer	e01870
Huang, Yijie / Dong, Li / Qi, Xibo / Wang, Tongcheng / Li, Peng / Zhong, Jitao	Effects of mix components on mechanical properties of marine volcanic-scoria concrete under axial compression	e01837
Lu, Jun / Cai, Zhedong / Gao, Yueqing / Yin, Yangyang / Ma, Zhiming / Liang, Chaofeng	Effects of pretreatment methods on the properties of recycled aggregates and prepared concrete under CO2-curing	e01826
Kangu, Adam Nice / Shitote, Stanley Muse / Onchiri, Richard Ocharo / Matallah, Mohammed	Effects of waste tyre steel fibres on the ultimate capacity of headed studs in normal concrete	e02166
Nusier, Osama / Alawneh, Ahmed / Alsuqaier, Ahmad	The efficiency of granular pile anchor foundation system in reducing heave of Irbid expansive clayey soil: An experimental investigation	e01846
Makhlouf, Mohamed H. / Mansour, M. H.	Efficiency of innovative strengthening techniques and anchorage systems using different materials on flexure performance of R.C beams	e01733
Farzinpour, Alireza / Mohammadi Dehcheshmeh, Esmaeil / Broujerdian, Vahid / Nasr Esfahani, Samira / Gandomi, Amir H.	Efficient boosting-based algorithms for shear strength prediction of squat RC walls	e01928
Hakeem, Ibrahim Y. / Abd-Al Ftah, Raghda Osama / Tayeh, Bassam A. / Hafez, Radwa Defalla Abdel	Eggshell as a fine aggregate replacer with silica fume and fly ash addition in concrete: A sustainable approach	e01842
Alshahrani, Abdullah / Kulasegaram, Sivakumar / Kundu, Abhishek	Elastic modulus of self-compacting fibre reinforced concrete: Experimental approach and multi-scale simulation	e01723
Kou, Xinyu / Li, Liang / Du, Xiuli / Zheng, Xiyao	Elastoplastic dynamic constitutive model of concrete with combined effects of temperature and strain rate	e01905
Mikhailenko, Peter / Piao, Zhengyin / Poulikakos, Lily D.	Electric arc furnace slag as aggregates in semi-dense asphalt	e02049
Zhu, Haibo / Zhang, Xiaoyu / Cui, Jie	Enhancing the seismic performance of piles in liquefiable soils by slag powder	e01995
Polo-Mendoza, Rodrigo / Mora, Otto / Duque, Jose / Turbay, Emilio / Martinez-Arguelles, Gilberto / Fuentes, Luis / Guerrero, Oswaldo / Perez, Sergio	Environmental and economic feasibility of implementing perpetual pavements (PPs) against conventional pavements: A case study of Barranquilla city, Colombia	e02112
Wang, Houzhi / Liu, Yixuan / Li, Jing / Liu, Shinan / Yang, Jun / Luo, Sang / Huang, Wei	Environmental life cycle assessment of bridge deck pavement and case studies of two bridges in China	e02115
Zhang, Huiqin / Ma, Zhenghao / Ji, Ping / Bi, Yufeng / Cao, Weidong / Liu, Shutang	Establishment and application of theoretical-empirical prediction model of VMA in hot mix asphalt mixture	e01986
Lee, Sang-Yum / Le, Tri Ho Minh	Evaluating pavement performance in bus rapid transit systems: Lessons from Seoul, South Korea	e02065
Yin, Hang / Zhao, Ernian / Zhang, Xin / Yan, Kai	Evaluating post-fire mechanical performance of S355J2W weathering steel with different artificial cooling approaches	e02101
Ghenai, Chaouki / Rejeb, Oussama / Sinclair, Timothy / Almarzouqi, Naseebah / Alhanaee, Nawal / Rossi, Federico	Evaluation and thermal performance of cool pavement under desert weather conditions: Surface albedo enhancement and carbon emissions offset	e01940
Zhu, Xuan / Yu, Huanan / Qian, Guoping / Yao, Ding / Dai, Wan / Zhang, Hu / Li, Jie / Zhong, Huiping	Evaluation of asphalt mixture micromechanical behavior evolution in the failure process based on Discrete Element Method	e01773
Kim, Yeong-Min / Nguyen, Phat Tien / Phan, Tam Minh / Park, Dae-Wook	Evaluation of chip seal mixture design methods using modified Hamburg wheel tracking test and sweep test	e02108
Muhammad, Muhammad A. / Ahmed, Faris R.	Evaluation of deflection and flexural performance of reinforced concrete beams with glass fiber reinforced polymer bars	e01855
Wang, Junfeng / Zhang, Renshuang / Lu, Liulei / Luo, Qi / Li, Xiaoli / Yi, Yang / Bai, Xiaokang	Evaluation of mechanical properties and abrasion resistance of PAN fiber-reinforced sulfoaluminate cement composites	e01973
Aliu, Adekunle O. / Olalusi, Oladimeji B. / Awoyera, Paul O. / Kiliswa, Moses	Evaluation of pozzolanic reactivity of maize straw ash as a binder supplement in concrete	e01790
Bakar, Mohd Basri Che / Rashid, Raizal Saifulnaz Muhammad / Amran, Mugahed / Jaafar, Mohd Saleh	Evaluation of the bond-dependent factors for CFRP bars used as structural reinforcement: A critical review	e02064
Hamid, Wagdi / Alnuaim, Ahmed	Evaluation of the durability and strength of stabilized sabkha soil with geopolymer	e02051
Zhang, Dajiang / Fang, Kuizhen / Xu, Dong / Cui, Suping / Wang, Dongmin	Evaluation of the environmental medium erosion resistance of natural hydraulic lime and metakaolin-air lime mortars	e02044
Li, Bao / Li, Ning / Yu, Xin / Xie, Jianguang / Zhan, He / Ding, Jian / Ma, Hui	Evaluation of the field-aged performance of foamed warm mix asphalt: Comparisons with hot mix asphalt	e01750
Zhao, Zhuang / Wei, Yang / Wang, Gaofei / Lin, Yu / Ding, Mingmin	Evaluation of the load-carrying effect of rectangular concrete-filled steel tubular columns under axial compression based on the multilevel extension method	e02041
Orosa, Pablo / Pérez, Ignacio / Pasandín, Ana R.	Evaluation of water loss and stiffness increase in cold recycled mixes during curing	e01877
Almuaythir, Sultan / Abbas, Mohamed Farid	Expansive soil remediation using cement kiln dust as stabilizer	e01983
Yin, Qian / Wu, Saisai / Wu, Jiangyu / Jing, Hongwen / Zhang, Qiang / Zhang, Yuanchao	Experiment and particle flow simulation of unloading induced shearing properties for jointed sandstone materials	e02012
Ma, Zhiyao / Huang, Hairong / Hu, Xinying / Yang, Haiping	Experiment study on the mechanical properties and alkali silica reaction (ASR) of mortar blended rice husk ash (RHA)	e02028
Nguyen, Minh Hai / Phan, Hoang Nam / Do, Viet Hai / Huynh, Phuong Nam	An experiment-based nonlinear model of shear force-slip relationship for perfobond strips in an unreinforced narrow joint with high-strength steel fiber mortar	e02092
Zhuang, Chuanyi / Chen, Kun / Ye, Yali / Hao, Yan / Zhang, Jiahao	Experimental and computational study on the anti-rutting behavior of an asphalt mixture based on an advanced MTS test	e02176
Sheng, Xingwang / Xiao, Shimiao / Zheng, Weiqi / Sun, Huanzhong / Yang, Ying / Ma, Kunlin	Experimental and finite element investigations on hydration heat and early cracks in massive concrete piers	e01926
El-Mandouh, Mahmoud A. / Elsamak, Galal / Rageh, Basem O. / Hamoda, Ahmed / Abdelazeem, Fathi	Experimental and numerical investigation of one-way reinforced concrete slabs using various strengthening systems	e01691
Yin, Chuanyin / Xie, Linlin / Li, Aiqun / Yang, Cantian / Wang, Xinyu	Experimental and numerical investigations on the similitude effect of scaled lead rubber bearings for shaking table test	e01878
Li, Yida / Xu, Xiaoqing / Hou, Zhujian / Zhou, Yuwen / Tan, Hongmei / Liu, Yuqing	Experimental and numerical study on tensile performance of GFRP bar reinforced UHPC members	e02106
Yang, Huifeng / Lu, Yan / Ling, Xiu / Tao, Haotian / Shi, Benkai	Experimental and theoretical investigation on shear performances of glued-in perforated steel plate connections for prefabricated timber–concrete composite beams	e01885
Esfandiari, J. / Heidari, O. / Esfandiari, S.	Experimental behavior of buckling restrained braces by adding diferent admixtures concrete and using the steel core under cyclic loads	e01876
Dengke, Wang / Gaozhan, Zhang / Yang, Li / Qingjun, Ding	Experimental investigation and reliability prediction of high performance concrete based on lightweight aggregate under 4-point bending loading	e01804
Ghanim, Abdulnoor A. J. / Ur Rahman, Fayyaz / Adil, Waqas / Zeyad, Abdullah M. / Magbool, Hassan M.	Experimental investigation of industrial wastes in concrete: Mechanical and microstructural evaluation of pumice powder and Fly Ash in concrete	e01999
Evgeny, Khorkov / Ernest, Mindubaev / Valerii, Pavlov / Ilshat, Mirsayapov / Ruslan, Ibragimov / de Azevedo, Afonso R. G.	Experimental investigation of the deformability of the masonry vault in church historical building	e01833
Hong, Guoqian / Liu, Wenhua / Li, Wugang / Hu, Pan / Huang, Shiyi / Kong, Gangqiang	Experimental investigation on expansion characteristics and strength of carbonating reactive magnesia solidified clay	e01918
Niu, Shilei / Wang, Zuocai / Wang, Junyi / Wang, Donghui / Sun, Xiaotong	Experimental investigation on flexural performance of polyester polyurethane concrete steel bridge deck composite structure	e01915
Xiong, Weiwei / Zhu, Hanqing / Xu, Jinjun / Ma, Jibing / Luo, Chaohui	Experimental investigation on physical and mechanical properties of excavated soil- and fine recycled concrete aggregate-based unfired clay bricks containing compound additives	e02057
Liu, Yihui / Wan, Yun / Zhou, Shuangxi / Huang, Minrui / Zhao, Zhibo / Wang, Yongbo / Liu, Pengpeng / Ma, Yunsheng	Experimental investigation on the compression-after-double-impact behaviors of GF/epoxy laminates embedded with/without metal wire nets	e01783
Yao, Yanbin / Wu, Bojian / Zhang, Wenjiao / Fu, Ying / Kong, Xiangqing	Experimental investigation on the impact properties and microstructure of recycled steel fiber and silica fume reinforced recycled aggregate concrete	e02213
Kim, Young Chan / Lee, Heon Woo / Hu, Jong Wan	Experimental performance evaluation of elastic friction damper	e01823
Lu, Wen-Liang / Sun, Jing-Long / Su, Han / Chen, Liang-Jiang / Zhou, Yong-Zheng	Experimental research and numerical analysis of welding residual stress of butt welded joint of thick steel plate	e01991
Zhangabay, Nurlan / Suleimenov, Ulanbator / Utelbayeva, Akmaral / Buganova, Svetlana / Tolganbayev, Akzhan / Galymzhan, Karshyga / Dossybekov, Serik / Baibolov, Kanat / Fediuk, Roman / Amran, Mugahed / Duissenbekov, Bolat / Kolesnikov, Aleksandr	Experimental research of the stress-strain state of prestressed cylindrical shells taking into account temperature effects	e01776
Zhao, Zhuyu / Xue, Jinchun / Jin, Jiefang / Tan, Li / Xia, Wenbin / Cai, Ruoyan	Experimental research on the dynamic constringent characteristics and fractal properties of sandstone under impact loading	e02174
Ding, Wenqi / Guo, Yingjie / Li, Shuobiao / Li, Xiaoran / Zhang, Qingzhao	Experimental Research on the Mechanical Behavior of Segmental Joints of Shield Tunnel Reinforced With New Stainless Steel Corrugated Plate	e02170
Ma, Xinxin / Sun, Jianheng / Zhang, Fengshuang / Yuan, Jing / Meng, Zhiliang	Experimental studies and analyses on axial compressive properties of full iron tailings concrete columns	e01881
Elwakkad, Noha Yehia / Heiza, Khaled Mohamed / Tayeh, Bassam A. / Mansour, Walid	Experimental study and finite element modelling of the torsional behavior of self-compacting reinforced concrete (SCRC) beams strengthened by GFRP	e02123
Nam, Huynh Phuong / Minh Hai, Nguyen / Van Huong, Nguyen / Quang, Pham Duc / Tuan, Nguyen Duc / Hai, Do Viet / Binh, Nguyen Thanh / Vy, Tran Quang	Experimental study on 80 MPa grade light transmitting concrete with high content of optical fibers and eco-friendly raw materials	e01810
Zheng, Hui / Cui, Chao / Xuan, Shuaifei / Ma, Xiaowan / Li, Zhaochao / Li, You	Experimental study on direct shear performance of prefabricated splicing joints of ultrahigh-performance concrete	e01771
Cao, Zhipeng / Li, Zhengwei / Deng, Shaowei / Wang, Lei / Jiang, Haibo / Xian, Bingxiong	Experimental study on interfacial shear behavior of PBL shear connector deeply embedded in UHPC	e02192
He, Zhongying / Song, Yifan / Wang, Jianguo / Xu, Wen / Guan, Hongzhai / Pang, Yutao	Experimental study on mechanical property degradation of thermal aging laminated rubber bearing	e02060
Liu, Mengyi / Lu, Haijun / Wang, Chaofeng / Liu, Yajun	An experimental study on microanalytical characterizations and service performances of landfill modified municipal sludge liner materials in contact with leachate	e01794
Qu, Xiao / Chen, Yu / Yin, Dawei	Experimental study on progressive failure characteristics of strip coal pillar models under different roof and floor conditions	e02147
Liu, Heng / Liu, Yanhai / Li, Aijun / Lei, Haidong	Experimental study on the bond performance of deformed steel bar in ultrahigh performance concrete	e01874
Zhang, Jianwei / Yin, Yue / Shi, Wanpeng / Song, Danqing / Yu, Lu / Shi, Lei / Han, Zhiguang	Experimental study on the calcium carbonate production rates and crystal size of EICP under multi-factor coupling	e01802
Liu, Xiaochun / Yang, Xian / Zheng, Weiqi / Xie, Shaohui / Zhu, Zhihui / Yu, Zhiwu	Experimental study on the fatigue and freeze-thaw properties of geotextile isolation layer in CRTS III ballastless tracks	e01988
Xu, Yachong / Karim, Md. Rajibul / Freney, Martin / Rahman, Md. Mizanur / Hassanli, Reza / Zhuge, Yan	Experimental study on the mechanical performance of tyre encased soil elements for structural wall applications	e01971
Khandani, Faeze Sadat / Atapour, Hadi / Rad, Mostafa Yousefi / Khosh, Behzad	An experimental study on the mechanical properties of underground mining backfill materials obtained from recycling of construction and demolition waste	e02046
Wu, Yuxuan / Yu, Tianlai / Xu, Wenyuan / Wang, Yifan / Zhang, linlin / Yang, Liang	Experimental study on the shear resistance of PUC-steel plate interface under stud connection	e02053
Ho, Hoai / Nguyen, Huy Cuong / Dinh, Huu Tai / Ngo, Dang Quang / Le, Dang Dung	Experimental study on the tensile strength degradation of curved alkali resistant glass and carbon textile as concrete reinforcement under complex loading	e01947
Wang, Yonghui / Fang, Jiasi / Li, Jin / Fang, Hu / Xie, Jiankai / Li, Shangkun / Pan, Jin	Exploring coffee extract as a renewable admixture to prepare mortars with better performance	e01879
Mohamed, Abdeliazim Mustafa / Tayeh, Bassam A. / Abu Aisheh, Yazan I. / Salih, Musab Nimir Ali	Exploring the performance of steel fiber reinforced lightweight concrete: A case study review	e01968
Wang, Jue / Ji, Wenyu / An, Mingzhe / Li, Wangwang	Fatigue behavior of reinforced UHPC-NC composite beams	e02055
Manibalan, P. / Kesaven, S. / Abirami, G.	Fatigue response of RC beam strengthened by BFRP laminate	e01707
Ziyad Sami, Balahaha Hadi / Ziyad Sami, Balahaha Fadi / Kumar, Pavitra / Ahmed, Ali Najah / Amieghemen, Goodnews E. / Sherif, Muhammad M. / El-Shafie, Ahmed	Feasibility analysis for predicting the compressive and tensile strength of concrete using machine learning algorithms	e01893
Ahmadi, Hassan / Shakiba, Milad / Mortazavi, Seyed Mohammad Reza / Bazli, Milad / Azimi, Zahir	Feasibility of using Static-Cast Concrete Transmission Poles fully reinforced with glass-fibre reinforced polymer bars and stirrups: A case study	e01780
Zhang, Xiaoyu / Lu, Yi	FEM analysis of wasted tire chip and sand as construction material for piles	e01735
Koyama, Atsushi / Akira, Yoshikazu / Mitabe, Hitoshi / Fukubayashi, Yoshinori / Suetsugu, Daisuke	Field experiment of vibration characteristics of lightweight embankments converted from bridges using rigid polyurethane foam-filling under traffic load	e01756
Gowthaman, Sivakumar / Koizumi, Hiromu / Nakashima, Kazunori / Kawasaki, Satoru	Field experimentation of bio-cementation using low-cost cementation media for preservation of slope surface	e02086
Zheng, Ming / Nie, Xin / Fan, Jiansheng / Liu, Yufei / Zhuang, Liangdong / Ren, Jinlong / Rong, Muning / Zhai, Wei	Field test study for evaluation of vibration control capacity of cracked mass concrete layer	e02030
Santini, Silvia / Cogotti, Marina / Baggio, Carlo / Sabbatini, Valerio / Sebastiani, Claudio	Field testing for structural behavior of a stratified monumental complex over time: Palazzo Colonna-Barberini and Templum Fortunae Praeneste	e02152
Zhang, Jiehui / Gao, Xuelong / Zhang, Pan / Wang, Yuhong / Huang, Shuping / Lin, Guan	Field tests on Fiber-Reinforced Plastic (FRP) stormwater storage tank under road pavements for “Sponge City” development	e02097
Chaiyotha, Danai / Kantawong, Watcharapong / Payakanitia, Panjasila / Pinitsoontorn, Supree / Chindaprasirt, Prinya	Finding optimized conditions for 3D printed high calcium fly ash based alkali-activated mortar	e01976
Yang, Wenqing / Zhang, Wanyi / Xie, Dong / Wang, Yi / Sun, Xiaoyan / Zhou, Ru / Jiang, Juncheng	A flame retardant containing dicyandiamide and aluminum hypophosphite for polyethylene	e01797
Shayanfar, Mohsenali / Shahrabadi, Hamid	Flexural behavior of green RC beams with disposable glasses fibers in a marine environment	e01972
Attia, Mohammed M. / Abdelsalam, Bassam Abdelsalam / Tobbala, Dina E. / Rageh, Basem O.	Flexural behavior of strengthened concrete beams with multiple retrofitting systems	e01862
Qin, Fengjiang / Wei, Xinyan / Lu, Youfu / Zhang, Zhigang / Di, Jin / Yin, Zhiwei	Flexural behaviour of high strength engineered cementitious composites (ECC)-reinforced concrete composite beams	e02002
Alshannag, Mohammad / Alshmalani, Mansur / Alsaif, Abdulaziz / Higazey, Mahmoud	Flexural performance of high-strength lightweight concrete beams made with hybrid fibers	e01861
Wang, Yonggui / Cheng, Junhui / Wang, Junbo	Flexural performance of recycled concrete beam reinforced with modified basalt fiber and nano-silica	e02022
Jia, Pengjiao / Guan, Yongping / Lu, Bo / Zhao, Wen / Bai, Qian / Du, Xi	Flexural performance of steel tube roof slab and parameter optimization	e01726
Roshani, Hamed / Yousefi, Mehdi / Gharaei-Moghaddam, Nima / Hashem Khatibi, Seyed	Flexural performance of steel-concrete-steel sandwich beams with lightweight fiber-reinforced concrete and corrugated-strip connectors: Experimental tests and numerical modeling	e02138
Ahmed, Sayed / Sharaky, I. A. / Ibrahim, Yasser E. / Abdo, Ayman	Flexural response of GFRP RC beams strengthened with side and bottom NSM GFRP bars	e01858
Alabduljabbar, Hisham / Amin, Muhammad Nasir / Eldin, Sayed M. / Javed, Muhammad Faisal / Alyousef, Rayed / Mohamed, Abdeliazim Mustafa	Forecasting compressive strength and electrical resistivity of graphite based nano-composites using novel artificial intelligence techniques	e01848
Liu, Junxia / Zang, Shujie / Yang, Fei / Hai, Ran / Yan, Yimeng	Fracture properties of steel fibre reinforced high-volume fly ash self-compacting concrete	e02110
Morozova, Nadezhda / Shibano, Kazuma / Shimamoto, Yuma / Tayfur, Sena / Alver, Ninel / Suzuki, Tetsuya	Frost damage evaluation of concrete irrigation structure by X-ray CT and AE energy release trend at the initial loading stage	e02088
Zhong, Jian / Wu, Qiao-Fei / Zhu, Yun-tao / Li, Jian / Zheng, Xiang-Lin / Wang, Yi-xian	Full-scale segment model test and performance improvement scheme of cable-pylon anchorage zone for cable-stayed bridge	e01808
Santamaria, Amaia / Revilla-Cuesta, Víctor / Skaf, Marta / Romera, Jesús M.	Full-scale sustainable structural concrete containing high proportions of by-products and waste	e02142
Imran, Muhammad / Khushnood, Rao Arsalan / Fawad, Muhammad	A hybrid data-driven and metaheuristic optimization approach for the compressive strength prediction of high-performance concrete	e01890
Falara, Maria G. / Thomoglou, Athanasia K. / Gkountakou, Fani I. / Elenas, Anaxagoras / Chalioris, Constantin E.	Hybrid smart cementitious materials incorporating ladder scale carbon fiber reinforcement: An experimental investigation	e02035
Sheng, Xingwang / Xiao, Shimiao / Zheng, Weiqi / Yang, Ying / Ma, Kunlin	Hydration kinetics analysis of cementitious paste composites produced by binary and ternary binder materials for potential use in massive concrete structures	e02209
Liu, Tiejun / Ju, Yutong / Lyu, Hanxiong / Zhuo, Qinglin / Qian, Hanjie / Li, Ye	Identification and analysis of seashells in sea sand using computer vision and machine learning	e02121
Pham, Tung Thanh / Kurihashi, Yusuke	Impact behavior of no-stirrup Reinforced Concrete Beam with Cushion	e01809
Althoey, Fadi / Zaid, Osama / Martínez-García, Rebeca / Alsharari, Fahad / Ahmed, Mohd / Arbili, Mohamed M.	Impact of Nano-silica on the hydration, strength, durability, and microstructural properties of concrete: A state-of-the-art review	e01997
Juveria, Fatima / Rajeev, Pathmanathan / Jegatheesan, Piratheepan / Sanjayan, Jay	Impact of stabilisation on mechanical properties of recycled concrete aggregate mixed with waste tyre rubber as a pavement material	e02001
Fattouh, Mohy S. / Tayeh, Bassam A. / Agwa, Ibrahim Saad / Elsayed, Elsayed K.	Improvement in the flexural behaviour of road pavement slab concrete containing steel fibre and silica fume	e01720
Mohamed, Abubaker Ahmed Mohamed Salih / Yuan, Junping / Al-Ajamee, Mohammed / Dong, Yi / Ren, Yuzhe / Hakuzweyezu, Theogene	Improvement of expansive soil characteristics stabilized with sawdust ash, high calcium fly ash and cement	e01894
Tajaddini, Arash / Saberian, Mohammad / Kamalzadeh Sirchi, Vahid / Li, Jie / Maqsood, Tariq	Improvement of mechanical strength of low-plasticity clay soil using geopolymer-based materials synthesized from glass powder and copper slag	e01820
Shi, Changchun / Jin, Shengji / Jin, Kanhui / Yang, Yuhao / Xu, Li	Improving bonding behavior between basalt fiber-reinforced polymer sheets and concrete using multi-wall carbon nanotubes modified epoxy composites	e02216
Ran, Tao / Pang, Jianyong / Liu, Yushan / Zou, Jiuqun / Cai, Fulin	Improving concrete fatigue resistance with COVID-19 rubber gloves: An innovative sustainable approach	e01914
Chen, Bingcheng / Peng, Ligang / Zhong, He / Zhao, Yuxi / Meng, Tao / Zhang, Bo	Improving the mechanical properties of mussel shell aggregate concrete by aggregate modification and mixture design	e02017
Sharda, Arvind / Manalo, Allan / Ferdous, Wahid / Bai, Yu / Nicol, Lachlan / Mohammed, Ali / Benmokrane, Brahim	In-plane shear behaviour of prefabricated modular wall system assembled of fibre reinforced polymer composites	e01819
Wang, Wei-Chien / Duong, Hoang Trung Hieu / Zhang, Chen-Hong	Influence of accelerating admixtures on high early strength cement performance using heat curing method	e01746
Saif, Mohamed S. / Shanour, Ali S. / Abdelaziz, Gamal E. / Elsayad, Hanaa I. / Shaaban, Ibrahim G. / Tayeh, Bassam A. / Hammad, Mahmoud S.	Influence of blended powders on properties of Ultra-High Strength Fibre Reinforced Self Compacting Concrete subjected to elevated temperatures	e01793
Kang, Choonghyun / Kim, Taewan	Influence of brine on hydration reaction of calcium sulfoaluminate and slag blended cement	e02159
Yu, Xuexia / Li, Gang / Zhao, Hongyan / Ma, Yuwei / Li, Qingqing / Chen, Yonghang / Li, Wenhui	Influence of chemically-modified cotton straw fibers on the properties of asphalt mortar	e01787
Jacques, Kouadjo Tchekwagep Jean / Zengyao, Wang / Shoude, Wang / Shifeng, Huang / Xin, Cheng	The influence of different fine aggregate and cooling regimes on the engineering properties of sulphoaluminate cement mortar after heating	e01866
Kanagaraj, Balamurali / Anand, N. / Raj R, Samuvel / Lukose, Jude / Andrushia, Diana / Lublóy, Éva	Influence of elevated temperature exposure on the interfacial shear strength capacity of binary blended high strength self-compacting geopolymer concrete	e01974
Baeza, Juan Ramón / Compán, Víctor / Pachón, Pablo / Aguilar, Jaime / Cámara, Margarita	Influence of moisture content on the mechanical properties of an ancient high-porosity building sandstone: San Cristóbal's stone (Andalusia, Spain)	e02128
Liu, Qi / Zhang, Ze / Zhang, Shengrong / Li, Xianglong / Long, Haichao / Meng, Xiangxi / Melnikov, Andrey / Gagarin, Leonid	The influence of particle morphology on the long-term strength of sandy soil under freeze-thaw cycles	e02196
Xia, Hongxiang / Sun, Quansheng / Wang, Shijie	Influence of strain rate effect on energy absorption characteristics of bio-inspired honeycomb column thin-walled structure under impact loading	e01761
Abdalla, Jamal A. / Hawileh, Rami A. / Bahurudeen, A. / Syed Ahmed Kabeer, K. I. / Thomas, B. S.	Influence of synthesized nanomaterials in the strength and durability of cementitious composites	e02197
Lingye, Leng / wenwen, Liang / Zhang, Caihong / Pengfei, Zhang / Tian, Wei	Influence of temperature rising inhibitor on temperature and stress field of mass concrete	e01888
Backes, Jana Gerta / Hinkle-Johnson, Rowan / Traverso, Marzia	The influence of the Functional Unit on the comparability of life cycle assessments in the construction sector: A Systematic Literature Review and attempt at unification for Reinforced Concrete	e01966
Ueno, K. / Takahashi, S. / Yamamoto, M. / Kanamori, T. / Kawabe, S. / Nakajima, I. / Ishii, M.	Influences of test conditions of sandblasting on replicability of abrasion pattern of concrete subjected to hydrodynamic action	e01812
Chen, Jianguo / Huang, ZhuoJie / Du, Weilian / Zhu, Yuling / Shi, Mingsheng / Xue, Binghan	Inhibitory mechanism of fly ash on alkali-silica reactivity of siliceous rock fine aggregate: A case study of Yangxi concrete dam	e02093
Hakeem, Ibrahim Y. / Hosen, Md. Akter / Tayeh, Bassam A. / Alhamami, Ali	Innovative Ultra-High Performance Concrete (UHPC) Incorporating oil ash and electric arc furnace dust	e01843
Jayanthi, V. / Avudaiappan, Siva / Amran, Mugahed / Arunachalam, Krishna Prakash / Qader, Diyar N. / Delgado, Manuel Chávez / Saavedra Flores, Erick I. / Rashid, Raizal S. M.	Innovative use of micronized biomass silica-GGBS as agro-industrial by-products for the production of a sustainable high-strength geopolymer concrete	e01782
Amin, Muhammad Nasir / Nazar, Sohaib / Al-Hashem, Mohammed Najeeb / Althoey, Fadi / Farouk Deifalla, Ahmed / Arab, Abdullah Mohammad Abu	An integral approach for testing and computational analysis of glass powder in cementitious composites	e02063
Salas Montoya, Andres / Chung, Chul-Woo / Mira_Rada, Beatriz E.	Interaction Effect of Recycled Aggregate Type, Moisture State, and Mixing Process on the Properties of High-Performance Concretes	e02208
Albadri, Wael M. / Alhani, Israa J. / Shaia, Hussein A. / Sabri, Mohanad Muayad Sabri / Lim, Sin Mei / Jabbar, Mohanad Sameer / Mohammed, Murtadha Saeed	Investigating the hydro-mechanical behaviour of unsaturated sand-bentonite mixtures using suction-controlled triaxial test	e01953
Cao, Zhilong / Yu, Jianying / Yi, Juan / Sun, Guoqiang / Xu, Song / Han, Xiaobin	Investigation of road performances of rejuvenated styrene-butadiene-styrene modified asphalt mixture	e02181
Li, Xiaoda / Yu, Zhipeng / Chen, Kexin / Deng, Chunlin / Yu, Fang	Investigation of temperature development and cracking control strategies of mass concrete: A field monitoring case study	e02144
das Vitorias do Nascimento, Maria / de Medeiros Melo Neto, Osires / Lucena, Adriano Elísio de Figueirêdo Lopes / Guerra, Thamires Dantas / da Silva Lopes, Albaniza Maria / do Nascimento, Emanuel Pereira	Investigation of the adhesion conditions of the micro-surfacing applied on asphalt concrete	e02155
Abd, Suhad M. / Mhaimeed, Isam S. / Tayeh, Bassam A. / Mohammed Najm, Hadee / Qaidi, Shaker	Investigation of the use of textile carbon yarns as sustainable shear reinforcement in concrete beams	e01765
Makhlouf, Mohamed H. / Ismail, Gamal / Abdel Kreem, Ahmed H. / Badawi, Marwa I.	Investigation of transverse reinforcement for R.C flat slabs against punching shear and comparison with innovative strengthening technique using FRP ropes	e01935
Zeng, Lu / Liang, Meikun / Cai, Wenjia / Tang, Jing / Liu, Guojin / Zhang, Jianxin / Wang, Shuping / Yang, Kai	Investigation on effect of EVA on properties of desert sand-based permeable materials	e02038
Lu, Jing / Zhang, Min / Feng, Jianlin / Gao, Yangming / Yang, Ye / Li, Yuanyuan / Li, Linglin	Investigation on the technical performance and workability of hot-melting road marking materials using for the high-altitude area	e02027
Li, Weichao / Zhang, Qiyong / Li, Laibo / Li, Yali / Zhang, Haiming / Lu, Lingchao	Investigation on water and fertilizer retention properties of hydrated sulphoaluminate cement pastes modified by bentonite for porous ecological concrete	e01967
Li, Fuhai / Liu, Gengyuan / Liu, Menghui / Yang, Zongchi / Chen, Zhao / Wen, Tao / Guo, Jian / Shao, Junhu	Investigations on influences of Engineered Cementitious Composites (ECC) on pull-out properties of studs in steel-concrete composite bridge	e02131
Kong, Linghai / Zhu, Dayong	Laboratory Evaluation of Carbon Nanotubes Modified Bio-asphalt	e01944
Pan, Yuanyuan / Guo, Hui / Guan, Wei / Zhao, Yongli	A laboratory evaluation of factors affecting rutting resistance of asphalt mixtures using wheel tracking test	e02148
Li, Bo / Wang, Jiadong / Cao, Gui / Nan, Xueli / Li, Xiaomin / Li, Wenju / Zhang, Yunpeng	Laboratory investigation and BP neural network modeling on heat-activated oil shale semi-coke attributable to the mechanical properties of concrete	e02090
Zhang, Yuling / Lu, Weiwei / Peng, Xinghai / Xie, Nasi / Zhang, Honggang / Pan, Qinxue / Xie, Min	Laboratory Investigation of Modified Asphalt Containing Buton Rock Asphalt or Ash from Buton Rock Asphalt	e02124
Liu, Zhengfu / He, Zhongming / Zhang, Wenzhou / Luo, Shijia	Laboratory test and prediction model of dynamic resilient modulus of carbonaceous mudstone coarse-grained soil	e01887
Ahmad, Zeeshan / Alsulamy, Saleh / Raza, Ali / Salmi, Abdelatif / Abid, Muhammad / Farouk Deifalla, Ahmed / Khadimallah, Mohamed Amine / Elhadi, Khaled Mohamed	Life cycle assessment (LCA) of polypropylene fibers (PPF) on mechanical, durability, and microstructural efficiency of concrete incorporating electronic waste aggregates	e01979
Santos Arruda Junior, Euler / de Sales Braga, Nállyton Tiago / Barata, Márcio Santos	Life cycle assessment to produce LC³ cements with kaolinitic waste from the Amazon region, Brazil	e01729
Allouzi, Rabab / Almasaeid, Hatem / Alkloub, Amer / Ayadi, Osama / Allouzi, Rawan / Alajarmeh, Ramia	Lightweight foamed concrete for houses in Jordan	e01924
Peng, Jun / Kang, Shao-Bo / Shi, Ling-Long / Yu, Xiao-Fan / Zhou, Shu-Rong / Xiong, Gang	Local buckling resistance of bamboo scrimber plates in compression	e02146
Wang, Shunfeng / Wu, Kai / Yang, Zhenghong / Tang, Luping	Long-term (2 years) drying shrinkage evaluation of alkali-activated slag mortar: Experiments and partial factor analysis	e01956
Liu, Xiaoyang / Yu, Wen / Huang, Yue / Yang, Guotao / You, Weijie / Gao, Lei / Song, Jun	Long-term behaviour of recycled aggregate concrete beams prestressed with carbon fibre-reinforced polymer (CFRP) tendons	e01785
Hassan, Gulan Bapeer / Al-Kamaki, Yaman S. S. / Mohammed, Azad A. / Alsaad, Alaa	Long-term exposure of RC columns immersed in seawater or crude oil confined with CFRP fabrics under monotonic or cyclic loading	e01747
Wang, Xudong / Miao, Changqing / Hao, DiDi	Machine learning-assisted fatigue performance optimization for cutout geometry of orthotropic steel bridge decks	e01962
Hu, Tianyu / Zhang, Hong / Zhou, Jianting	Machine learning-based model for recognizing the failure modes of FRP-strengthened RC beams in flexure	e02076
Almeida Junior, Euclydes Ferrer de / Martini, Sandro	Measurements of electrical impedance in cementitious mortars: Influence of electrodes and physical dimensions of specimens	e01880
Shamass, Rabee / Rispoli, Ottavia / Limbachiya, Vireen / Kovacs, Robert	Mechanical and GWP Assessment of Concrete Using Blast Furnace Slag, Silica Fume and Recycled Aggregate	e02164
Affan, Houssam / Arairo, Wahib / Arayro, Jack	Mechanical and thermal characterization of bio-sourced mortars made from agricultural and industrial by-products	e01939
Özkılıç, Yasin Onuralp / Basaran, Bogachan / Aksoylu, Ceyhun / Karalar, Memduh / Martins, Carlos Humberto	Mechanical behavior in terms of shear and bending performance of reinforced concrete beam using waste fire clay as replacement of aggregate	e02104
Xie, Geng / Suo, Yonglu / Liu, Lang / Zhu, Mengbo / Xie, Lei / Qu, Huisheng / Sun, Weiji	Mechanical grinding activation of modified magnesium slag and its use as backfilling cementitious material	e01778
Loginova, E. / Schollbach, K. / Proskurnin, M. / Brouwers, H. J. H.	Mechanical performance and microstructural properties of cement mortars containing MSWI BA as a minor additional constituent	e01701
Liu, Dawei / Yu, Jianqiao / Qin, Fengjiang / Zhang, Kechao / Zhang, Zhigang	Mechanical performance of high-strength engineering cementitious composites (ECC) with hybriding PE and steel fibers	e01961
Meng, Lingqi / Zhang, Chunxiao / Wei, Jiuqi / Li, Lei / Liu, Jingbiao / Wang, Shihe / Ding, Yahong	Mechanical properties and microstructure of ultra-high strength concrete with lightweight aggregate	e01745
Han, Daguang / Xiong, Weiwei / Chen, Yicun / Xu, Jinjun	Mechanical properties of excavated soil waste-based cementitious products at normal condition or after water soaked: A literature review of experimental results	e02111
Wang, Yuzhuo / Liang, Chen / Zhang, Bingjie / Qu, Shuang / Gao, Ying / Zhang, Xiao	Mechanical properties of fast-growing poplar glulam columns reinforced with steel plate	e01825
Luo, Zhili / Zhang, Xiao / Gao, Yang / Wang, Yongbao / Liu, Fang / Lan, Xuejiang	Mechanical properties of loess subgrade treated by superabsorbent polymer	e01741
Wang, Fei / Sun, Yingzhi / Xue, Xuanyi / Wang, Neng / Zhou, Junhong / Hua, Jianmin	Mechanical properties of modified coral aggregate seawater sea-sand concrete: Experimental study and constitutive model	e02095
Son, Dong-Hee / Hwangbo, Dongsun / Suh, Heongwon / Bae, Baek-Il / Bae, Sungchul / Choi, Chang-Sik	Mechanical properties of mortar and concrete incorporated with concentrated graphene oxide, functionalized carbon nanotube, nano silica hybrid aqueous solution	e01603
Gong, Junlin / Wang, Yuzhuo / Qu, Shuang / Zhang, Bingjie / Feng, Jinpeng	Mechanical properties of steel reinforced reactive powder concrete columns under axial compression	e01930
Nian, Tengfei / Li, Shuwang / Li, Ping / Li, Jinggao / Han, Zhao / Xue, Shiwen	Mechanical response of interlayer structural shear performance of asphalt pavement with functional layer considering interlayer contact state	e01934
Wang, Fuzhi / Huang, Jizhng / Zhao, Hengyu	Mechanical Sandstone Deterioration Due to Cement Binder Material Materials Under Dry-wet Cycling	e02169
Garg, Rishav / Garg, Rajni / Eddy, Nnabuk Okon / Khan, Mohd. Amir / Husain Khan, Afzal / Alomayri, Thamer / Berwal, Parveen	Mechanical strength and durability analysis of mortars prepared with fly ash and nano-metakaolin	e01796
Chen, Chang / Fang, Litong / Wang, Yubin / Jiu, Shaowu / Chen, Yanxin	Mechanical, thermal and microscopic properties of gypsum matrix composites containing capric acid-palmitic acid/urea-formaldehyde microcapsules	e02084
Liu, Zhen / Gu, Xingyu / Dong, Xiyang / Cui, Bingyan / Hu, Dongliang	Mechanism and Performance of Graphene Modified Asphalt: An Experimental Approach Combined with Molecular Dynamic Simulations	e01749
Liu, Hengrui / Tian, Zhenghong / Ma, Yuanshan / Xiang, Junzheng / Sun, Xiao / Li, Jiajie / Zuo, Xian	Mechanism of attapulgite processed by calcination and grinding on hydration process and mechanical properties of cementitious materials	e02091
Lei, Jiexin / Qi, Yi / Gu, Qiang	Mechanisms of plasticity development and energy dissipation on concrete-encased steel plate shear wall with boundary steel frame under cyclic loading	e02089
Li, Na / Zhao, Yanru / Xing, YongMing / He, XiaoYan / Li, Haixia	Meso-damage analysis of concrete based on X-ray CT in-situ compression and using deep learning method	e02118
Li, Yang / Hao, Zhibin / Shen, Zihao / Fu, Pei / Zhang, Jiangkun	Mesoscopic modeling and simulation of tensile properties of cracked concrete using cohesive model	e02186
Ashraf, Shahzad / khan, Suliman / Oad, Vipin Kumar	Microcracking monitoring and damage detection of graphene nanoplatelets-cement composites based on acoustic emission technology	e01844
Chen, Keke / Zhang, Haitao / Gu, Yongcai / Zhao, Song	Microscopic action and rheological properties of reinforced modified asphalt with varying fiber content	e01824
Al-Khateeb, Ghazi / Sukkari, Alaa / Zeiada, Waleed / Ezzat, Helal	Microscopy-based approach for measuring asphalt film thickness and its impact on hot-mix asphalt performance	e01711
Srinivasa, Anil Sagar / Swaminathan, K. / Yaragal, Subhash C.	Microstructural and optimization studies on novel one-part geopolymer pastes by Box-Behnken response surface design method	e01946
Chung, Sang-Yeop / Oh, Seo-Eun / Jo, Su-Sung / Lehmann, Christian / Won, Jonghwa / Abd Elrahman, Mohamed	Microstructural investigation of mortars incorporating cockle shell and waste fishing net	e01719
Shobeiri, Vahid / Bennett, Bree / Xie, Tianyu / Visintin, Phillip	Mix design optimization of concrete containing fly ash and slag for global warming potential and cost reduction	e01832
Alabduljabbar, Hisham / Khan, Kaffayatullah / Awan, Hamad Hassan / Alyousef, Rayed / Mohamed, Abdeliazim Mustafa / Eldin, Sayed M.	Modeling the capacity of engineered cementitious composites for self-healing using AI-based ensemble techniques	e01805
Zacchei, Enrico / Simões, Nuno / Vieira, Antonio / Esteves, Miguel / Silva, Helder	Modelling of layers interactions on the structural behaviour of insulating glasses. Vertical deflection analyses	e02129
El-kady, Mahmoud S. / Azam, Abdelhalim / Yosri, Ahmed. M. / Nabil, Marwa	Modelling of railway embankment stabilized with geotextile, geo-foam, and waste aggregates	e01800
Sun, Xiaolong / Peng, Qinyuan / Zhu, Yongqiang / Jin, Jiao / Xu, Jieting / Yin, Yingmei / Ng, Alex Hay-Man	Modification and enhancing effect of SPUA material on asphalt binder: A study of viscoelastic properties and microstructure characterization	e01781
Azil, Athmane / Touati, Karim / Sebaibi, Nassim / Le Guern, Malo / Streiff, François / Goodhew, Steve / Gomina, Moussa / Boutouil, Mohamed	Monitoring of drying kinetics evolution and hygrothermal properties of new earth-based materials using climatic chamber simulation	e01798
Gong, Li / Yu, Xingbo / Liang, Yuting / Gong, Xuelei / Du, Qiangye	Multi-scale deterioration and microstructure of polypropylene fiber concrete by salt freezing	e01762
Jackowski, Mateusz / Małek, Marcin	A multi-site study of a new cement composite brick with partial cement substitutes and waste materials	e01992
Li, Bo / Guo, Sheng / Chen, Xin / Nan, Xueli / Chen, Zhanquan / Li, Dongna / Wang, Yongning	Nanoscale study on adhesion performance and aging degree prediction of warm mix asphalt under UV aging condition	e02143
Wang, Haowu / Yin, Peng	A new flame retardant and its effect on the asphalt mixture	e01748
Zaragoza-Benzal, Alicia / Ferrández, Daniel / Atanes-Sánchez, Evangelina / Moron, Carlos	New lightened plaster material with dissolved recycled expanded polystyrene and end-of-life tyres fibres for building prefabricated industry	e02178
Biswas, Rahul / Kumar, Manish / Singh, Raushan Kumar / Alzara, Majed / El Sayed, S. B. A. / AbdelMongy, Mohamed / Yosri, Ahmed M. / Yousef, Saif Eldeen A. S.	A novel integrated approach of RUNge Kutta optimizer and ANN for estimating compressive strength of self-compacting concrete	e02163
Chen, Xuan / Xiong, Zhongming / Zhuge, Yan / Liu, Yue / Cheng, Kai / Fan, Wei	Numerical analysis of compressive behavior of pre-damaged concrete columns strengthened with textile-reinforced ECC	e02198
Ge, Wenjie / Liu, Chi / Zhang, Zhiwen / Guan, Zhongwei / Ashour, Ashraf / Song, Shoutan / Jiang, Hongbo / Sun, Chuanzhi / Qiu, Linfeng / Yao, Shan / Yan, Weihua / Cao, Dafu	Numerical and theoretical research on flexural behaviour of steel-precast UHPC composite beams	e01789
Ahmed, Awais / Iqbal, Javed / Eldin, Sayed M. / Khan, Rawid / Iqbal, Mudassir	Numerical aspects of phase field models for low-temperature fracture in asphalt mixtures	e02077
Hejazi, Seyed Amir Mousavian / Feyzpour, Atra / Khaje khabaz, Mohamad / Eslami, Abolfazl / Fouladgar, Milad / Eftekhari, S. Ali / Toghraie, Davood	Numerical investigation of rigidity and flexibility parameters effect on superstructure foundation behavior using three-dimensional finite element method	e01867
Li, Shaohui	Numerical investigation on viscoelastic response of asphalt mixture under tire braking slip	e02009
Go, Chaeyeon / Kwak, Yun-Ji / Kwag, Shinyoung / Eem, Seunghyun / Lee, Sangwoo / Ju, Bu-Seog	On developing accurate prediction models for residual tensile strength of GFRP bars under alkaline-concrete environment using a combined ensemble machine learning methods	e02157
Hammood, Haider J. / Esfandiari, Javad / Movahednia, Mehrdad / Tahamouli Roudsari, Mehrzad	Openings effects on the structural behavior of interior voided slab-column connections: An experimental study	e01998
Rong, Xian-Liang / Yang, Jing-heng / Jun, Luo / Zhang, Yi-Xin / Zheng, Shan-Suo / Dong, Liguo	Optimal ground motion intensity measure for seismic assessment of high-rise reinforced concrete structures	e01678
Yi, Teng / Liou, Shuenn-Ren / Kuo, Wen-Yih	Optimizing a hybrid mortar for an alkali-activated material by papermaking process wastes and blast furnace slag utilizing Taguchi–Grey relational analysis method	e02116
Amin, Muhammad Nasir / Ahmad, Waqas / Khan, Kaffayatullah / Farouk Deifalla, Ahmed	Optimizing compressive strength prediction models for rice husk ash concrete with evolutionary machine intelligence techniques	e02102
Wang, Feng / Tan, Tianlong / Fan, Yong / Song, Jian / Liang, Caipeng / Zhang, Ao / Chen, Jiali	Optimum selection of temperature control measures for combined intake tower in alpine region during construction period	e01883
Berardi, Umberto / Soudian, Shahrzad	Outdoor test facilities for the experimental performance evaluation of construction materials and systems: The BeTOP case	e01920
Abu Aisheh, Yazan I.	Palm oil fuel ash as a sustainable supplementary cementitious material for concrete: A state-of-the-art review	e01770
Aramburu, A. / Calderon-Uriszar-Aldaca, I. / Puente, I.	Parametric modelling of 3D printed concrete segmented beams with rebars under bending moments	e01910
Huang, Huan-Sheng / Zhang, Hai-Yan / Lv, Yan-Mei / Chen, Yao-Jia	Performance and optimization design of high-strength geopolymer cold-bonded lightweight aggregate: Effect of silica fume	e02047
Lou, Yuanfeng / Khan, Kaffayatullah / Amin, Muhammad Nasir / Ahmad, Waqas / Farouk Deifalla, Ahmed / Ahmad, Ayaz	Performance characteristics of cementitious composites modified with silica fume: A systematic review	e01753
Wu, Kexiao / Zhu, Han / Ibrahim, Yasser E. / Jiang, Wenlixia / Haruna, S. I. / Shao, Jianwen / Adamu, Musa	Performance evaluation of bond strength and fiber type on the mechanical properties of polyurethane-based polymer mortar	e02114
Liu, Zhen / Gu, Xingyu	Performance evaluation of full-scale accelerated pavement using NDT and laboratory tests: A case study in Jiangsu, China	e02083
Wei, Yingjie / Yang, Yuyou / Wang, Jintai / Liu, Huancun / Li, Jianguang / Jie, Yuxin	Performance evaluation of high energy dynamic compaction on soil-rock mixture geomaterials based on field test	e01734
Wali Khan, Sajjad / Kamal, Mustafa / Khan, Fasih Ahmed / Gul, Akhtar / Alam, Muhammad / Shah, Feroz / Shahzada, Khan	Performance evaluation of the fresh and hardened properties of different PVA-ECC mixes: An experimental approach	e01764
Wei, Pengfei / Yin, Guansheng / Shi, Minghui / Zhang, Wanqi / Feng, Junjie	Performance investigation and parameter optimization of ultra-light aerated concrete using orthogonal experimental design	e01841
Lei, Bin / Xiong, Qianghui / Zhao, Hanbing / Dong, Wenkui / Tam, Vivian W. Y. / Sun, Zhihui / Li, Wengui	Performance of asphalt mortar with recycled concrete powder under different filler-to-asphalt weight ratios	e01834
Hwalla, Joud / El-Hassan, Hilal / Assaad, Joseph J. / El-Maaddawy, Tamer	Performance of cementitious and slag-fly ash blended geopolymer screed composites: A comparative study	e02037
Wang, Xiaorui / Yang, Gaoyuan / Tan, Fei / Lin, Yunhong / Zhai, Bingyong	The performance of construction waste backfilling subway depot—A case study in Zhengzhou	e01900
Attia, Mohammed M. / El-Latief, Ahmed A. / Eita, M.A	Performance of RC beams with novelty GFRP under the bending load: An Experimental and FE Study	e02000
Mohan, R. / Chakrawarthi, Vijayaprabha / Nagaraju, T. Vamsi / Avudaiappan, Siva / Awolusi, T. F. / Roco-Videla, Angel / Azab, Marc / Kozlov, Pavel	Performance of recycled Bakelite plastic waste as eco-friendly aggregate in the concrete beams	e02200
Ghayeb, Haider Hamad / Atea, Rafid Saeed / Al-Kannoon, Muslim Abdul-Ameer / Lee, Foo Wei / Wong, Leong Sing / Mo, Kim Hung	Performance of reinforced concrete flat slab strengthened with CFRP for punching shear	e01801
	Performance-based experimental study into quality zones of lightweight concrete using pumice aggregates	e01960
Shi, Ying / Song, Yanmei / Min, Chendi / Du, Jing / Wang, Xiaolin / Min, Jie / Wang, Shaofeng	Phosphogypsum pretreatment with CaCO3 to improve the backfill performance	e01954
Althoey, Fadi / Zaid, Osama / Arbili, Mohamed M. / Martínez-García, Rebeca / Alhamami, Ali / Shah, Hammad Ahmed / Yosri, Ahmed M.	Physical, strength, durability and microstructural analysis of self-healing concrete: A systematic review	e01730
Nafees, Afnan / Althoey, Fadi / khan, Sherbaz / Sikandar, Muhammad Ali / Alyami, Saleh H. / Faisal Rehman, Muhammad / Javed, Muhammad Faisal / Eldin, Sayed M.	Plastic concrete mechanical properties prediction based on experimental data	e01831
Kanagaraj, Balamurali / Anand, N. / Cashell, Katherine A. / Andrushia, A. Diana	Post-fire behaviour of concrete containing nano-materials as a cement replacement material	e02171
Jaya Kumar, G. / Kiran, T. / Anand, N. / Anbarasu, M. / Lublóy, Éva	Post-fire flexural behaviour and performance of unrestrained cold-formed steel built-up section beams: Experimental and numerical investigation	e01978
Cosgun, Turgay / Akan, Aslı Er / Uzdil, Oguz / Er, Arzu / Ormecioglu, Hilal Tuğba / Sayin, Baris	Post-restoration seismic performance assessment of a historic hypostyle mosque in Anatolia (13th century AD)	e01849
Fořt, Jan / Mildner, Martin / Keppert, Martin / Abed, Mohammed / Černý, Robert	Potential of industrial waste as alternative alkaline activator for development of eco-efficient mortars	e01716
Alyousef, Rayed / Abbass, Wasim / Aslam, Fahid / Shah, Muhammad Imran	Potential of waste woven polypropylene fiber and textile mesh for production of gypsum-based composite	e02099
Sultana, Iffat / Sadiqul Islam, G. M.	Potential Use of Ladle Furnace Slag as Supplementary Cementitious Material in Concrete	e02141
Dong, Xiaobin / Wang, Han / Miao, Yanchun / Gao, Yuchao / Li, Yali / Lin, Junlin / Jiang, Jinyang / Lu, Zeyu	Potential utilization of superabsorbent polymer to develop sustainable concrete in plateau regions	e02062
Alabduljabbar, Hisham / Khan, Majid / Awan, Hamad Hassan / Eldin, Sayed M. / Alyousef, Rayed / Mohamed, Abdeliazim Mustafa	Predicting ultra-high-performance concrete compressive strength using gene expression programming method	e02074
Van Tran, Mien / Chau, Vinh Ngoc / Nguyen, Phu Huu	Prediction and control of temperature rise of massive reinforced concrete transfer slab with embedded cooling pipe	e01817
Althoey, Fadi / Akhter, Muhammad Naveed / Nagra, Zohaib Sattar / Awan, Hamad Hassan / Alanazi, Fayez / Khan, Mohsin Ali / Javed, Muhammad Faisal / Eldin, Sayed M. / Özkılıç, Yasin Onuralp	Prediction models for marshall mix parameters using bio-inspired genetic programming and deep machine learning approaches: A comparative study	e01774
Al-Jaberi, Zuhair / Myers, John J.	Prediction of compressive strength and evaluation of different theoretical standards and proposed models of brick columns confined with FRP, FRCM, or SRG system	e01875
Huang, Yifan / Lei, Yu / Luo, Xuedong / Fu, Chao	Prediction of compressive strength of rice husk ash concrete: a comparison of different metaheuristic algorithms for optimizing support vector regression	e02201
Nguyen, Trong-Ha / Tran, Ngoc-Long / Phan, Van-Tien / Nguyen, Duy-Duan	Prediction of shear capacity of RC beams strengthened with FRCM composite using hybrid ANN-PSO model	e02183
Kang, Gyeong-o / Kim, Young-Sang / Kang, Jung-goo	Predictive strength model of cement-treated fine-grained soils using key parameters: Consideration of the total water/cement and soil/cement ratios	e02069
Li, Yang / Yang, Xinyi / Lu, Bin	Preparation and curing properties of waterborne epoxy emulsified asphalt/DMP-30 composites	e01869
Tao, Xu / Li, Pengcheng / Wang, Guoling / Li, Weifeng / Ma, Suhua	Preparation and hydration of Belite-Ye'elimite-Ternesite clinker based on industrial solid waste	e01922
Mao, Yanpeng / Zhang, Jiazheng / Wu, Han / Huang, Yanmin / Wang, Xujiang / Li, Jingwei / Sun, Jing / Wang, Wenlong	Preparation of architectural 3D printing material with a solid waste-derived sulfoaluminate matrix: A high-value conversion of solid waste	e01744
Silva do Carmo, Dalisson Peterson / Englund, Karl / Li, Hui	Pressure mapping and susceptibility to bonding failure for low-quality lamstock in cross laminated timber	e01933
Gao, Qi / Xiao, Jianzhuang / Shen, Jianyu / Hou, Yiqing / Guo, Jianmiao	Properties of super-thin layer mortar with recycled brick fines for sintered perforated block masonry	e02015
Mihara, Takafumi / Yoshitake, Isamu / Kitada, Tatsuya / Ono, Masaki	Pull-out test of carbon-fiber composite cable (CFCC) tendon for an internal anchorage	e02029
Wang, Yumin / Chen, Jiaping / Yan, Qiurong / Peng, Yi / Kong, Lingyun	Quantitative characterization of aggregates and their chemical constituents in terms of acid and alkaline indicators	e02079
Xie, Weili / Dong, Shuxiong / Sang, Yuan / Zhao, Xinyu / Zhang, Xiaocun / Liu, Kaihua	RACBase: a cloud-based database of recycled aggregate concrete durability	e02004
Zada, Umar / Jamal, Arshad / Iqbal, Mudassir / Eldin, Sayed M. / Almoshaogeh, Meshal / Bekkouche, Souhila Rehab / Almuaythir, Sultan	Recent advances in expansive soil stabilization using admixtures: current challenges and opportunities	e01985
Shi, Liwan / Wang, Yuechan / Li, Hao / Liang, Hehao / Lin, Bohuang / Wang, Duanyi	Recycled asphalt mixture's discrete element model-based composite structure and mesoscale-mechanical properties	e01987
Alshehri, Hussain Ali / Al Abdul Wahhab, Hamad I. / Dalhat, M. A. / Al-Juhani, Abdul-Hadi Abdallah / Al-Osta, Mohammed A.	Recycled polyethylene waste as binder stabilizer for SMA mix in gulf environment	e02177
Saudy, Maram / Breakah, Tamer / Kaloop, Mosbeh R. / El-Badawy, Sherif	Regional implementation of the mechanistic empirical pavement design and analysis approach: Egyptian case study	e01863
Pescari, Simon / Budău, Laurențiu / Vîlceanu, Clara –. Beatrice	Rehabilitation and restauration of the main façade of historical masonry building –Romanian National Opera Timisoara	e01838
Ribeiro, Rogério Pinto / Moreiras, Sérgio Trajano Franco / Baldan, Victor José dos Santos / Xavier, Gustavo de Castro / Monteiro, Sergio N. / de Azevedo, Afonso R. G.	Relationships between the surface roughness of Brazilian dimension stones and the adhesion to mortars	e01868
Ray, Rahul / Choudhary, Shiva Shankar / Roy, Lal Bahadur / Kaloop, Mosbeh R. / Samui, Pijush / Kurup, Pradeep U. / Ahn, Jungkyu / Hu, Jong Wan	Reliability analysis of reinforced soil slope stability using GA-ANFIS, RFC, and GMDH soft computing techniques	e01898
Bouzas, O. / Conde, B. / Matos, J. C. / Solla, M. / Cabaleiro, M.	Reliability-based structural assessment of historical masonry arch bridges: the case study of Cernadela bridge	e02003
Li, Dai-lin / Lin, Jia-jian / Shi, Guo-dong / Zhang, Jun-Liang / Li, Hong / Zhang, Xin	Research on Laplace transform of stress wave propagation relaxation function in multi-layer media	e02103
Han, Dongdong / Liu, Guoqiang / Xi, Yinfei / Zhao, Yongli	Research on long-term strength formation and performance evolution with curing in cold recycled asphalt mixture	e01757
Sun, Yihan / Zheng, Lijuan / Cheng, Yudong / Chi, Fengxia / Liu, Kai / Zhu, Tongbao	Research on maintenance equipment and maintenance technology of steel fiber modified asphalt pavement with microwave heating	e01965
Zheng, Tengteng / Yuan, Liangjian / Zhao, Caiqi / Shang, Lijie / Zhao, Weiran	Research on seismic performance of honeycomb plate cylindrical reticulated shell structure	e01897
Rahimi, Mohammad Zaheer / Zhao, Rongguo / Sadozai, Shafiullah / Zhu, Feng / Ji, Nan / Xu, Lingpeng	Research on the influence of curing strategies on the compressive strength and hardening behaviour of concrete prepared with Ordinary Portland Cement	e02045
Zhouyi, Chen / xin, Yang / Qixin, Wu / Hongmei, Hu / Jianguang, Shi / Yiren, Xie	Research on the performance of modified shell ash mortar used for strengthening of historical masonry buildings	e02139
Fu, Tao / Zhu, Zhixin / Ren, Xiaoqian / Wang, Kai / Meng, Lingxiao / Sun, Zhonghua	Research on the seismic behaviour of hollow prefabricated square column with high-strength reinforcement using UHPC grouting materials	e01816
Gao, Junfeng / Chen, Jiakang / Meng, Xianwei / Wang, Hainian / Xu, Ning	Research on the selection of polyurethane adhesive and direct tensile properties of polyurethane rubber particle mixture	e01728
Geng, Songyuan / Luo, Qiling / Liu, Kun / Li, Yunchao / Hou, Yuchen / Long, Wujian	Research status and prospect of machine learning in construction 3D printing	e01952
Nunes Lopes, Carolina de Melo / Mendes, Vítor Freitas / Garcia, Danielle Rios / Mendes, Julia Castro	Residues in cement-based composites: Occurrence mapping in Brazil	e01763
Rodríguez-Alloza, Ana María / Autelitano, Federico / Giuliani, Felice	Restoration of physical properties on an aged crumb rubber modified bitumen adding a bio-based recycling agent	e01990
Zhuang, Mei-Ling / Sun, Chuanzhi / Bai, Liutao / Gao, Li / Qiao, Yan / Zhang, Weihua / Lu, Chenhui / Li, Zhengheng / Ma, Yunsheng / Zhao, Qingsong	A restoring force model for a novel type of precast beam-to-column joints using mechanical connections	e01840
Carigi, Andrea / Saltarin, Simone / Di Giovanni, Alfio / Todaro, Carmine / Peila, Daniele	Reuse of EPB mucking for concrete production: A laboratory test campaign	e02187
Al-Noaimat, Yazeed A. / Ghaffar, Seyed Hamidreza / Chougan, Mehdi / Al-Kheetan, Mazen J.	A review of 3D printing low-carbon concrete with one-part geopolymer: Engineering, environmental and economic feasibility	e01818
Ho, Mun Ling / Yew, Ming Chian / Yew, Ming Kun / Saw, Lip Huat / Yeo, Wei Hong / Yong, Zi Cong	Revolutionary integrated cool roofing technologies system for attic temperature reduction in buildings	e01921
Memon, Abdul Muhaimin / Hartadi Sutanto, Muslich / Yusoff, Nur Izzi Md / Ali Memon, Rizwan / Khan, Muhammad Imran / Al-Sabaeei, Abdulnaser M.	Rheological modeling and microstructural evaluation of oily sludge modified bitumen	e02039
Ma, Shengkang / Zhang, Haitao / Gu, Yongcai / Gao, Meiyi / Shan, Zhaohui	Rheological properties of composite DTDM/DOP/SBS modified asphalt and its effect on high and low temperature performance	e02031
Zhao, Zenggang / Wang, Zipeng / Wu, Shaopeng / Xie, Jun / Yang, Chao / Li, Na / Cui, Peide	Road performance, VOCs emission and economic benefit evaluation of asphalt mixture by incorporating steel slag and SBS/CR composite modified asphalt	e01929
Talib, Hussnain / Khan, Raja Bilal Nasar / Khitab, Anwar / Benjeddou, Omrane / Khan, Riaz Akhtar	Scanning through multidisciplinary techniques and recreation of historic mortar: Case study of Rohtas Fort	e02052
Feng, Jian / Li, Yuanyuan / Wu, Huiying / Li, Xu / Feng, Fei / Cai, Jianguo	Seismic behavior of precast shear wall with novel bundled connections	e02098
Jianbing, Yu / Zhiqiang, Xu / Yufeng, Xia / Zhengxing, Guo	Seismic behavior of reactive powder concrete (RPC) interior beam–to-column joints under reversed cyclic loading	e01792
Gallegos, Marco F. / Araya-Letelier, Gerardo / Lopez-Garcia, Diego / Parra, Pablo F.	Seismic collapse performance of high-rise RC dual system buildings in subduction zones	e02042
Cosgun, Turgay / Ceylan, Oguz / Nasery, Mohammad Manzoor / Güler, Ömer / Sayin, Baris / Uzdil, Oguz / Akcay, Cemil	Seismic performance assessment and retrofitting proposal for a historic masonry school building (Bursa, Türkiye)	e02087
Tan, Wang / Xianqian, Ma / Ruinian, Jiang / Lijun, Dou / Jun, Liu / Yinlong, Hao / Liwei, Li / Zhijie, Zhou / Yibo, Cao / Haibin, Ma	Seismic performance of repaired prefabricated shear walls	e01896
Chen, Yonghui / Ke, Ke / Yi, Jinwen / Liu, Zhonghua / Ye, Dongchen / Xu, Guojun / Yuan, Shangfeng	Seismic performance of steel staggered truss frame equipped with brace-type hybrid dampers with multiple nonlinear stages	e02158
Selim, Mohamed / Ibrahim, Yasser E. / Emara, Mohamed	Seismic retrofitting of a deteriorated RC building	e01758
Xia, Wenjing / Xu, Zihang / Xu, Tao	Self-healing behaviors and its effectiveness evaluations of fiber reinforced shape memory polyurethane/SBS modified asphalt mortar	e01784
Yosri, Ahmed M. / Farouk, AIB / Haruna, S. I. / Farouk Deifalla, Ahmed / Shaaban, Walaa Mahmoud	Sensitivity and robustness analysis of adaptive neuro-fuzzy inference system (ANFIS) for shear strength prediction of stud connectors in concrete	e02096
Lavoie, Fernando Luiz / Kobelnik, Marcelo / Valentin, Clever Aparecido / de Lurdes Lopes, Maria / Palmeira, Ennio Marques / Lins da Silva, Jefferson	Service life of some HDPE geomembranes	e02212
Rehman, Atta Ur / Birru, Bizu Melesse / Kim, Jung-Hoon	Set-on-demand 3D Concrete Printing (3DCP) construction and potential outcome of shotcrete accelerators on its hardened properties	e01955
Feng, Jiahui / Li, Peisen / Wu, Jinpeng / Jiang, Haibo / Tian, Yueqiang / Sun, Xiangdong	Shear behavior of externally prestressed UHPC beams without stirrups	e01766
Al-Enezi, Meshal S. / Yousef, Ahmed M. / Tahwia, Ahmed M.	Shear capacity of UHPFRC deep beams with web openings	e02105
Moubarak, Ahmed M. R. / Ibrahim, Ahmed / Farouk, Mohamed A. / Elwardany, Hytham	Shear performance of glass fiber reinforced concrete beams with diverse embedded GFRP trusses	e02195
Fang, Zhuangcheng / Hu, Lingkai / Jiang, Haibo / Fang, Shu / Zhao, Guifeng / Ma, Yuhong	Shear performance of high-strength friction-grip bolted shear connector in prefabricated steel–UHPC composite beams: Finite element modelling and parametric study	e01860
Abbas, Husain / Almusallam, Tarek / Abadel, Aref / Alenzi, Saleh / Al-Salloum, Yousef	Shear strength of functionally graded self-compacting concrete deep beams reinforced with steel and GFRP bars	e01872
Tran, Mien V. / Vu, Tran H. / Nguyen, Thi Hai Yen	Simplified assessment for one-part 3D-printable geopolymer concrete based on slump and slump flow measurements	e01889
Yu, Shuyang / Ren, Xuhua / Zhang, Jixun / Sun, Zhaohua	Simulating the chemical-mechanical-damage coupling problems of cement-based materials using an improved smoothed particle hydrodynamics method	e02018
Zhang, Zihong / Wang, Hongyan / Gao, Ning	Simulation and parameter prediction model of rheological properties of fiber reinforced concrete	e01963
Kueh, Ahmad Beng Hong / Abo Sabah, Saddam H. / Qader, Diyar N. / Drahman, Siti Hasyyati / Amran, Mugahed	Single and repetitive low-velocity impact responses of sandwich composite structures with different skin and core considerations: A review	e01908
Wang, Chunshen / Ren, Xinyu / Diao, Quanwei / Pan, Xiaoyan / Su, Weiqing / Chang, Liang / Lin, Bin / Yan, Shuai	Sound absorption performance of a triple-hole structure in green ceramsite concrete for high-speed-railway sound barriers: Experiments and neural network modeling	e01980
Jegan, M. / Annadurai, R. / Kannan Rajkumar, P. R.	A state of the art on effect of alkali activator, precursor, and fibers on properties of geopolymer composites	e01891
Kumar, Abhinav / Tang, Tianchi / Gupta, Ankit / Anupam, Kumar	A state-of-the-art review of measurement and modelling of skid resistance: The perspective of developing nation	e02126
Jaczewski, Mariusz / Szydłowski, Cezary / Dołżycki, Bohdan	Stiffness of cold-recycled mixtures under variable deformation conditions in the IT-CY test	e02066
Ziada, Mahmoud / Erdem, Savaş	Strain hardening green cementitious composites reinforced with nanoparticles: Mechanical and microstructural properties and high temperature effect	e02033
Deng, Yongfeng / Liu, Li / Liu, Songyu / Zhang, Guoping / Sun, Haijun / Zhang, Bohao	Strength enhancement of cement-based stabilized clays via vacuum-assisted filtration	e02204
Yang, Fan / Yang, Shixing / Fu, Yuhua / Zhang, Youfeng	Stress-strain relationship and damage constitutive model of wet concrete under uniaxial compression	e02154
Shen, Zijie / Liu, Bai / Cheng, Xin / Zhou, Guangchun	Stressing state features of H-steel columns under cyclic biaxial bending action revealed from experimental residual strains	e01518
Çağlar, Naci / Vural, Isa / Kırtel, Osman / Saribiyik, Ali / Sumer, Yusuf	Structural damages observed in buildings after the January 24, 2020 Elazığ-Sivrice earthquake in Türkiye	e01886
Elsayed, Mahmoud / Abd-Allah, Samar R. / Said, Mohamed / El-Azim, Ahmed Abdel	Structural performance of recycled coarse aggregate concrete beams containing waste glass powder and waste aluminum fibers	e01751
Volokitina, Irina / Sapargaliyeva, Bayan / Agabekova, Aktolkyn / Volokitin, Andrey / Syrlybekkyzy, Samal / Kolesnikov, Alexandr / Ulyeva, Gulnara / Yerzhanov, Almas / Kozlov, Pavel	Study of changes in microstructure and metal interface Cu/Al during bimetallic construction wire straining	e02162
Kobaka, Janusz / Katzer, Jacek / Seweryn, Karol / Srokosz, Piotr / Bujko, Marcin / Konečný, Petr	A study of lunar soil simulants from construction and building materials perspective	e02082
Zhao, Yayun / Lei, Lulu / Wang, Qing / Li, Xiaodong	Study of superhydrophobic concrete with integral superhydrophobicity and anti-corrosion property	e01899
Derakhshani, Aliakbar / Ghadi, Arezoo / Vahdat, Seyed Ebrahim	Study of the effect of calcium nitrate, calcium formate, triethanolamine, and triisopropanolamine on compressive strength of Portland-pozzolana cement	e01799
Zhangabay, Nurlan / Kudabayev, Ruslan / Mizamov, Nursultan / Imanaliyev, Kuanysh / Kolesnikov, Alexandr / Moldagaliyev, Arman / Umbitaliyev, Altynsary / Kopzhassarov, Bakhadyr / Fediuk, Roman / Merekeyeva, Aliya	Study of the model of the phase transition envelope taking into account the process of thermal storage under natural draft and by air injection	e02050
Chen, Wei / Yin, Shenghua / Chen, Xun / Wang, Leiming / Zhang, Ming	Study on comprehensive utilization of tailings by using bioleaching and microbial-cementation	e02190
Deng, Huang-Shi / Fu, He-lin / Chen, Wei / Zhao, Yi-Bo / Yi, Hai-Dong	Study on deterioration, cracking mechanism and treatment measures of plain concrete lining with cold joints in high-speed railroad tunnel	e01895
Du, Yuhang / Song, LU / Jinyu, XU / Xia, Wei / Wang, Zhihang	Study on Dynamic Constitutive Relation and Fiber Pullout Simulation of Modified Carbon Fiber Reinforcement Concrete	e01994
Hu, Chao / Zhong, Daojun / Li, Shilong	A study on effect of oyster shell powder on mechanical properties of asphalt and multiple degrees of modification mechanism	e01786
He, Xiang / Yang, Junfen / Niu, Mengdie / Zhang, Ge / Li, Guoxin	Study on expansion effect and hydration characteristics of ultra-high strength cement-based grouting materials based on humidity compensation	e01941
Li, Hongming / Feng, Bo / An, Rui / Zhong, Jitao	Study on failure mode and parameter influence of epoxy coating steel strand with the impact action	e01951
Li, Wenbo / Huang, You / Liu, Zhaohui / Liu, Li	Study on influencing factors of synergistic deformation between built-in strain sensor and asphalt mixture	e01993
Gao, Hongshuai / Sun, Yue / Jian, Jiashuo / Dong, Yaqiao / Liu, Hongbo	Study on mechanical properties and application in communication pole line engineering of glass fiber reinforced polyurethane composites (GFRP)	e01942
Hu, Zhenhua / Wang, Ying / Wang, Chaojie	Study on mechanical properties of dredged silt stabilized with cement and reinforced with alginate fibers	e01977
Zhang, Qin / Yang, Qiao-Chu / Li, Wen-Jie / Gu, Xiang-Lin / Dai, Huan-Huan	Study on model of flexure response of carbon fiber textile reinforced concrete (CTRC) sheets with short AR-glass fibers	e01791
Zhang, Yanqing / You, Longfei / Han, Shi / Lv, Yvxuan / Hou, Feiyang / Duan, Shujin	Study on out-of-plane shear behavior of new tubular roof prefabricated structures	e01857
Zhao, Song / Zhang, Haitao / Feng, Yuping / Li, Jingdi / Gao, Meiyi / Wu, Guangyuan	Study on rheological and micro-structural properties of different modified asphalt by using organic and inorganic modifier	e02072
Zhu, Hongbing / Fu, Zhenghao / Wang, Ye / Zhang, Na	Study on splitting tensile strength of interface between the full lightweight ceramsite concrete and ordinary concrete	e01829
Wang, Bo / Lu, Kailong / Guangmin, Dai / Wu, Qing	Study on the effect of plant extracts as low carbon green admixtures on the performance of cement mortar	e02080
Wang, Xinyi / Chin, Chee Seong / Xia, Jun	Study on the properties variation of recycled concrete paving block containing multiple waste materials	e01803
Zhang, Shusen / Zheng, Xia / Yin, Canbin / Ye, Yunpeng / Li, Xingong	Study on the suitability of rice straw and silicate cement	e01739
Ge, Wenjie / Wang, Anlian / Zhang, Zhiwen / Ge, Yue / Chen, Yiwen / Li, Wei / Jiang, Hongbo / Shuai, Huaguo / Sun, Chuanzhi / Yao, Shan / Qiu, Linfeng	Study on the workability, mechanical property and water absorption of reactive powder concrete	e01777
Dadmand, Behrooz / Sadaghian, Hamed / Khalilzadehtabrizi, Sahand / Pourbaba, Masoud / Shirdel, Milad / Mirmiran, Amir	Studying the compressive, tensile and flexural properties of binary and ternary fiber-reinforced UHPC using experimental, numerical and multi-target digital image correlation methods	e01865
Tayeh, Bassam A. / Ahmed, Samir M. / Hafez, Radwa Defalla Abdel	Sugarcane Pulp Sand and Paper Grain Sand as Partial Fine Aggregate Replacement in Environment-friendly Concrete Bricks	e01612
Silva, Dione / Fajardo-San-Miguel, G. / Escadeillas, Gilles / Cruz-Moreno, Dulce	Surface treatment with silicon-based nanoparticles in Portland cement specimens subjected to physical sulfate attack	e01795
López-Montero, Teresa / Mañosa, Jofre / Miró, Rodrigo / Chimenos, Josep Maria	Sustainable asphalt mixtures by partial replacement of fine aggregates with low-grade magnesium carbonate by-product	e01705
Paruthi, Sagar / Husain Khan, Afzal / Kumar, Ashish / Kumar, Fanish / Hasan, Mohd Abul / Magbool, Hassan M. / Manzar, Mohammad Saood	Sustainable cement replacement using waste eggshells: A review on mechanical properties of eggshell concrete and strength prediction using artificial neural network	e02160
Bilgen, Gamze / Altuntas, Omer Faruk	Sustainable re-use of waste glass, cement and lime treated dredged material as pavement material	e01815
Kowalska, Magdalena / Grzesik, Bartłomiej / Adamczyk, Zdzisław / Nowak, Jacek / Konsek, Adam	Swelling of sulfate-bearing soil: A case study of A1 highway pavement failure	e02081
Nithurshan, Mylvaganam / Elakneswaran, Yogarajah	A systematic review and assessment of concrete strength prediction models	e01830
Gong, Xing / Liu, Quantao / Lv, Yang / Chen, Shuaichao / Wu, Shaopeng / Ying, Hong	A systematic review on the strategies of reducing asphalt pavement temperature	e01852
Guo, Fengqi / Zhang, Sanhong / Duan, Shuyi / Shen, Zhaolong / Yu, Zhiwu / Jiang, Lizhong / He, Chang	Temperature gradient zoning of steel beams without paving layers in China	e02054
Rajapaksha M., Malitha C. / Athukorallage, Bhagya / Senadheera, Sanjaya / James, Darryl	Temporal and spatial temperature predictions for flexible pavement layers using numerical thermal analysis and verified with large datasets	e02008
Oppong, Felix / Yao, Nan / Zhang, Wenhao / Liu, Yiding / Kolawole, Oladoyin	Tentative application of expansive cementitious materials in grouting – A systematic review	e02113
Amin, Muhammad Nasir / Ahmad, Waqas / Khan, Kaffayatullah / Al-Hashem, Mohammed Najeeb / Farouk Deifalla, Ahmed / Ahmad, Ayaz	Testing and modeling methods to experiment the flexural performance of cement mortar modified with eggshell powder	e01759
Etxebarria, Idoia / Veneranda, Marco / Costantini, Ilaria / Prieto-Taboada, Nagore / Larrañaga, Aitor / Marieta, Cristina / De Nigris, Bruno / Martellone, Alberta / Amoretti, Valeria / Arana, Gorka / Madariaga, Juan Manuel / Castro, Kepa	Testing the volcanic material burying Pompeii as pozzolanic component for compatible conservation mortars	e02194
Li, Zihan / Zhao, Qilin / Wu, Yingsong / Zhu, Yonglong / Wang, Haojing	A theoretical and experimental study on the pre-tensioning and anchorage of composite materials based on shape memory alloys	e01599
Al-Yasiri, Qudama / Szabó, Márta	Thermal analysis of concrete bricks-embedded phase change material: A case study under hot weather conditions	e02193
Zhang, Zhigang / Yu, Jianqiao / Qin, Fengjiang / Sun, Feng	Thermal effect on mechanical properties of metakaolin-based engineered geopolymer composites (EGC)	e02150
Harb, Elias / Maalouf, Chadi / Bliard, Christophe / Tenpierik, Martin / Lachi, Mohammed / Bogard, Fabien / Polidori, Guillaume	Thermal performance of starch/beet-pulp composite bricks for building insulation at a wall scale	e01851
Perera, U. N. D. / Chandrathilaka, E. R. K. / Kahandawa Arachchi, K. A. D. Y. T. / Gamage, J. C. P. H.	Thermal sensitivity of CFRP/Steel bond exposed to prolonged water ingress	e02071
Miao, Lianjuan / Lu, Chenggong / Jiao, Chujie	Thermodynamic parameter analysis of water vapor adsorption process of fly ash concrete material	e02119
Zhangabay, Nurlan / Baidilla, Islambek / Tagybayev, Askhat / Suleimenov, Ulanbator / Kurganbekov, Zhangeldi / Kambarov, Medetbek / Kolesnikov, Alexandr / Ibraimbayeva, Gulnaz / Abshenov, Khassen / Volokitina, Irina / Nsanbayev, Bakhytzhan / Anarbayev, Yermek / Kozlov, Pavel	Thermophysical indicators of elaborated sandwich cladding constructions with heat-reflective coverings and air gaps	e02161
Cuevas, Karla / Strzałkowski, Jarosław / Kim, Ji-Su / Ehm, Clemens / Glotz, Theresa / Chougan, Mehdi / Ghaffar, Seyed Hamidreza / Stephan, Dietmar / Sikora, Pawel	Towards development of sustainable lightweight 3D printed wall building envelopes – Experimental and numerical studies	e01945
Liu, Jinzhou / Wang, Weicheng / Wang, Yuchen / Zhou, Xingye / Wang, Shuyi / Liu, Qi / Yu, Bin	Towards the sustainable utilization of steel slag in asphalt pavements: A case study of moisture resistance and life cycle assessment	e01722
Xin, Yuecheng / Robert, Dilan / Mohajerani, Abbas / Tran, Phuong / Pramanik, Biplob Kumar	Transformation of waste-contaminated glass dust in sustainable fired clay bricks	e01717
Zakaria, Dina / Deifalla, A. / Mousa, Eslam / Elrahman, Amr Abd	Two-way shear full behavior of reinforced concrete flat slabs under membrane tensile forces	e01912
You, X. M. / Lin, L. B. / Fu, Bing / Xiang, Yu	Ultra-high performance concrete reinforced with macro fibres recycled from waste GFRP composites	e02120
Lin, Peng / Liu, Xueyan / Ren, Shisong / Li, Yi / Xu, Jian / Li, Mingliang	Unraveling the influence of fibers on aging susceptibility and performance of high content polymer modified asphalt mixtures	e02211
Petcherdchoo, Aruz / Pochalard, Sakol / Piriyakul, Keeratikan	Use of bender element tests for determining shear modulus of fly-ash and cement admixed Bangkok clay with considering unconfined compressive strength	e02040
Porto, Tássila Ramos / Lucena, Adriano Elísio de Figueirêdo Lopes / de Moraes, Thalita Maria Ramos Porto / de Medeiros Melo Neto, Osires / Costa, Daniel Beserra / de Sousa Carvalho, Flávia do Socorro / Torres, Paulo Roberto Barreto	The use of iron oxide in asphalt mixtures to reduce the effects of urban heat islands	e01709
Nguyen, Van Thong / Lee, Seon Yeol / Chung, Sang-Yeop / Moon, Jae-Heum / Kim, Dong joo	Use of multiphase voxels to simulate the effects of nano-silica on cement hydration	e01909
Wang, Wei-Chien / Mao, Yun-Jie	Using autoclave pulverization technology to evaluate the expansion potentiality of electric arc furnace oxidizing slag	e01901
Sun, Y. / Lee, H. S.	Using ensemble model to predict isothermal hydration heat of fly ash cement paste considering fly ash content, water to binder ratio and curing temperature	e01984
Tahwia, Ahmed M. / Hamido, Mohamed A. / Elemam, Walid E.	Using mixture design method for developing and optimizing eco-friendly ultra-high performance concrete characteristics	e01807
Zeyad, Abdullah M. / Shubaili, Mohammed / Abutaleb, Ahmed	Using volcanic pumice dust to produce high-strength self-curing concrete in hot weather regions	e01927
Bai, Meiyan / Xiao, Jianzhuang / Gao, Qi / Shen, Jianyu	Utilization of construction spoil and recycled powder in fired bricks	e02024
Al-Sabaeei, Abdulnaser M. / Alhussian, Hitham / Jadid Abdulkadir, Said / Giustozzi, Filippo / Napiah, Madzlan / Jagadeesh, Ajayshankar / Sutanto, Muslich / Memon, Abdul Muhaimin	Utilization of response surface methodology and machine learning for predicting and optimizing mixing and compaction temperatures of bio-modified asphalt	e02073
Ghalandari, Taher / Shi, Lei / Sadeghi-Khanegah, Farshid / van den bergh, Wim / Vuye, Cedric	Utilizing artificial neural networks to predict the asphalt pavement profile temperature in western Europe	e02130
Omar, Zaim / Sugiman, Sugiman / Mansor, Hazrina / Ahmad, Hilton	Utilizing XFEM model to predict the flexural strength of woven fabric Kenaf FRP plate strengthened on plain concrete beam	e02056
Szlachetka, Olga / Witkowska-Dobrev, Joanna / Dohojda, Marek	Vapor-permeable PP membranes – Tensile properties and surface structure	e01871
Men, Pengfei / Liang, Bowen / He, Wuchao / Di, Jin / Qin, Fengjiang / Zhang, Zhigang	Vertical shear resistance of noncompact steel–concrete composite girders under combined positive moment and shear	e01835
Saidin, Siti Shahirah / Abdul Kudus, Sakhiah / Jamadin, Adiza / Anuar, Muhamad Azhan / Amin, Norliyati Mohd / Ya, Atikah Bt Zakaria / Sugiura, Kunitomo	Vibration-based approach for structural health monitoring of ultra-high-performance concrete bridge	e01752
Burghardt, Tomasz E. / Chistov, Oleksandr / Reiter, Thomas / Popp, Roman / Helmreich, Bernhard / Wiesinger, Friedrich	Visibility of flat line and structured road markings for machine vision	e02048
Ren, Bingyu / Wang, Haodong / Wang, Dong / Guan, Tao / Zheng, Xiaofeng	Vision method based on deep learning for detecting concrete vibration quality	e02132
Zhang, Haitao / Gao, Meiyi / Feng, Yuping / Lv, Lihua	Volume stability study of new low-clinker high performance concrete	e02068

Über diese
Datenseite
IssueID
68818
Veröffentlicht am:
16.12.2022
Geändert am:
16.12.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Case Studies in Construction Materials - Juli 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Case Studies in Construction Materials - Juli 2023

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.