Case Studies in Construction Materials - Juni 2022

Erschienen:	Juni 2022

Artikel in dieser Ausgabe

Autor(en)	Titel	Seite(n)
Nochaiya, Thanongsak / Suriwong, Tawat / Julphunthong, Phongthorn	Acidic corrosion-abrasion resistance of concrete containing fly ash and silica fume for use as concrete floors in pig farm	e01010
Thejas, H. K. / Hossiney, Nabil	Alkali-activated bricks made with mining waste iron ore tailings	e00973
Sanga, Reuben / Kilumile, Menard / Mohamed, Fatma	Alternative clay bricks inspired from termite mound biomimicry	e00977
Guo, Rui / Zhou, Fei / Nian, Tengfei	Analysis of primary influencing factors and indices distribution law of rutting performance of asphalt mixtures	e01053
Perera, U. N. D. / Kahandawa Arachchi, K. A. D. Y. T. / Gamage, J. C. P. H.	An analytical approach to predict cohesion and interfacial failures of CFRP/steel composites under prolonged exposure to aqueous solutions	e00949
Wang, En / Ding, Faxing / Wang, Liping / Chen, Yangbo / Sheng, Shijing / Shen, Jingtao / Lin, Qitao	Analytical study on the composite behavior of rectangular CFST columns under combined compression and torsion	e01074
Tran, T. T. / Khennane, A. / Khelifa, M. / Girods, P. / Oudjene, M. / Rogaume, Y.	Application of kinetic pyrolysis models to the analysis of flax chipboards under fire	e00873
Ferrández, Daniel / Yedra, Engerst / Atanes-Sánchez, Evangelina / Moron, Carlos	Arduino based monitoring system for materials used in façade rehabilitation − Experimental study with lime mortars	e00985
Fülöp, Ludovic / Ferreira, Miguel / Tuhti, Antti / Rapaport, Guy	Assessing the challenges of condition assessment of steel-concrete (SC) composite elements using NDE	e00887
Damrongwiriyanupap, Nattapong / Srikhamma, Todsaporn / Plongkrathok, Chittinat / Phoo-ngernkham, Tanakorn / Sae-Long, Worathep / Hanjitsuwan, Sakonwan / Sukontasukkul, Piti / Li, Long-yuan / Chindaprasirt, Prinya	Assessment of equivalent substrate stiffness and mechanical properties of sustainable alkali-activated concrete containing recycled concrete aggregate	e00982
Almasaeid, Hatem H. / Suleiman, Akram / Alawneh, Rami	Assessment of high-temperature damaged concrete using non-destructive tests and artificial neural network modelling	e01080
Rahmad, Suzielah / Khahro, Shabir Hussain / Rosyidi, Sri Atmaja P. / Widyatmoko, Iswandaru / Aziz Memon, Naeem / Al-Sabaeei, Abdulnaser Mohammed / Milad, Abdalrhman / Hartadi Sutanto, Muslich / Yusoff, Nur Izzi Md.	Assessment of metal leaching from rediset-polymer modified asphalt binder on groundwater and soil contamination	e01108
Jayasinghe, Thushara / Gunawardena, Tharaka / Mendis, Priyan	Assessment of shear strengths of reinforced concrete beams without shear reinforcement: a comparative study between codes of practice and artificial neural network	e01102
Coli, Massimo / Donigaglia, Tessa / Cristofaro, Maria Teresa / Tanganelli, Marco / Viti, Stefania	Assessments on the material properties of the Pietraforte stone of Florence (Italy) in conservation, restoration and construction	e00986
Wang, Shuying / Liu, Pengfei / Gong, Zhenyu / Yang, Peng	Auxiliary air pressure balance mode for EPB shield tunneling in water-rich gravelly sand strata: Feasibility and soil conditioning	e00799
Shen, Maoyu / Huang, Wei / Liu, Jili / Zhou, Zhi	Axial compressive behavior of rubberized concrete-filled steel tube short columns	e00851
Wei, Jiangang / Xie, Zhitao / Zhang, Wei / Yang, Yan / Luo, Xia / Chen, Baochun	Axial compressive property of UHPC plate-CFST laced composite columns	e01085
Amin, Mohamed / Elsakhawy, Yara / Abu el-hassan, Khaled / Abdelsalam, Bassam Abdelsalam	Behavior evaluation of sustainable high strength geopolymer concrete based on fly ash, metakaolin, and slag	e00976
Al-Rousan, Rajai Z. / Al-Muhiedat, Jameel N.	The behavior heated-damaged reinforced concrete beams retrofitted with different CFRP strip length and number of transverse groove	e00896
Zeng, Jun-Jie / Guo, Yong-Chang / Liao, JinJing / Shi, Shu-Wei / Bai, Yu-Lei / Zhang, Lihai	Behavior of hybrid PET FRP confined concrete-filled high-strength steel tube columns under eccentric compression	e00967
Rodsin, Kittipoom / Joyklad, Panuwat / Hussain, Qudeer / Mohamad, Hisham / Buatik, Apichat / Zhou, Mingliang / Chaiyasarn, Krisada / Nawaz, Adnan / Mehmood, Tahir / ElNemr, Amr	Behavior of Steel Clamp Confined Brick Aggregate Concrete Circular Columns Subjected to Axial Compression	e00815
Sonal, Thakkar / Urmil, Dave / Darshan, Bhatol	Behaviour of Ambient Cured Prestressed and Non-Prestressed Geopolymer Concrete Beams	e00798
Abusogi, M. A. / Bakri, Mudthir	Behaviour of Cementitious Composites Reinforced with Polypropylene Fibres using Restrained Eccentric Ring Test	e00841
Luan, Jinjin / Chen, Xudong / Ning, Yingjie / Shi, Zhenxiang	Beneficial utilization of ultra-fine dredged sand from Yangtze River channel as a concrete material based on the minimum paste theory	e01098
Todaro, Carmine / Saltarin, Simone / Cardu, Marilena	Bentonite in two-component grout applications	e00901
Zahedi, Andisheh / Akpinar, Pinar	A case study for exploring the alkali-aggregate reactivity of Cyprus aggregates	e01000
Yang, Yabin / Chen, Gonglian / Wu, Yuxiang / Li, Xingxin / Li, Fenglan / Zhao, Shunbo	A case study on seismic behavior of circular-sectional steel tubular columns filled with concrete of 100% recycled aggregates	e00992
Veigas, Melvin Glenn / Najimi, Meysam / Shafei, Behrouz	Cementitious Composites Made with Natural Fibers: A Case Study of Uncoated and Coated Sisal Fibers	e00788
Liu, Yue / Xie, Jia-Zhan / Tafsirojjaman, T. / Yue, Qing-Rui / Tan, Cheng / Che, Gong-Jian	CFRP lamella stay-cable and its force measurement based on microwave radar	e00824
Zaid, Osama / Mukhtar, Faisal M. / M-García, Rebeca / El Sherbiny, Mohammad G. / Mohamed, Abdeliazim M.	Characteristics of high-performance steel fiber reinforced recycled aggregate concrete utilizing mineral filler	e00939
Iamchaturapatr, Janjit / Piriyakul, Keeratikan / Petcherdchoo, Aruz	Characteristics of sandy soil treated using EICP-based urease enzymatic acceleration method and natural hemp fibers	e00871
Tao, Yongzheng / Gautam, Bishnu Prasad / Pradhan, Prachand Man / Hu, Chuanlin	Characterization and reactivity of Nepali clays as supplementary cementitious material	e00947
Gutierrez-Velasquez, Elkin I. / Monteiro, Sergio Neves / Colorado, Henry A.	Characterization of expanded polystyrene waste as binder and coating material	e00804
Adhikary, Suman Kumar / Rudžionis, Žymantas / Tučkutė, Simona	Characterization of novel lightweight self-compacting cement composites with incorporated expanded glass, aerogel, zeolite and fly ash	e00879
Vu, Tran Huyen / Dang, Liet Chi / Kang, Gyeongo / Sirivivatnanon, Vute	Chloride induced corrosion of steel reinforcement in alkali activated slag concretes: A critical review	e01112
Pulido-Arcas, Jesús Alberto / Flores-Alés, Vicente / Pérez-Fargallo, Alexis	Coating mortars with improved physical properties, economic cost, and carbon footprint	e01095
Garcia-Troncoso, Natividad / Baykara, Haci / Cornejo, Mauricio H. / Riofrio, Ariel / Tinoco-Hidalgo, Marco / Flores-Rada, Jorge	Comparative mechanical properties of conventional concrete mixture and concrete incorporating mining tailings sands	e01031
Kunchariyakun, Kittipong / Sinyoung, Suthatip / Kajitvichyanukul, Puangrat	Comparative microstructures and mechanical properties of mortar incorporating wood fiber waste from various curing conditions	e00855
Hassan, Osama A. B. / Nour Emad, A. A. / Abdulahad, Gabriel	A comparative study between glulam and concrete columns in view of design, economy and environment	e00966
El Menshawy, Adel Samy / Farouk Mohamed, Abdelaziz / Fathy, Nayera Mahmoud	A Comparative Study on Green Wall Construction Systems, Case Study: South Valley Campus of Aastmt	e00808
Zhou, Chunheng / Pan, Jinjing / Zhang, Zihua / Zhu, Yaohong	Comparative study on the tensile mechanical behavior of GFRP bars under and after high temperature exposure	e00905
Tanyildizi, Harun / Ziada, Mahmoud / Uysal, Mucteba / Doğruöz Güngör, Nihal / Coskun, Ahmet	Comparison of bacteria-based self-healing methods in metakaolin geopolymer mortars	e00895
Yooprasertchai, Ekkachai / Piamkulvanit, Mawin / Srithong, Chanathip / Sukcharoen, Teerathamrong / Sahamitmongkol, Raktipong	A comparison of punching shear strengthening of RC flat plates with FRP bars and steel bolts	e00828
Li, Si-qi / Liu, Hong-Bo	Comparison of vulnerabilities in typical bridges using macroseismic intensity scales	e01094
Yang, Haihua / Liu, Liang / Yang, Wu / Liu, Hanlong / Ahmad, Waqas / Ahmad, Ayaz / Aslam, Fahid / Joyklad, Panuwat	A comprehensive overview of geopolymer composites: A bibliometric analysis and literature review	e00830
Qin, Di / Gao, PengKun / Aslam, Fahid / Sufian, Muhammad / Alabduljabbar, Hisham	A comprehensive review on fire damage assessment of reinforced concrete structures	e00843
Deng, Zhiheng / Chai, Wei / Liu, Bing / Hu, Yuhan	Compression behavior of CFRP–confined coral aggregate concrete (CCAC) circular stub columns	e00863
Ahmed, Hemn Unis / Mohammed, Ahmed S. / Faraj, Rabar H. / Qaidi, Shaker M. A. / Mohammed, Azad A.	Compressive strength of geopolymer concrete modified with nano-silica: Experimental and modeling investigations	e01036
Ahmad, Ayaz / Ahmad, Waqas / Aslam, Fahid / Joyklad, Panuwat	Compressive strength prediction of fly ash-based geopolymer concrete via advanced machine learning techniques	e00840
Sanderson, Tristan / Freeseman, Katelyn / Liu, Zhengyu	Concrete bridge deck overlay assessment using ultrasonic tomography	e00878
Chang, Qiuying / Zhao, Chuanhai / Xing, Lei / Ahmad, Waqas / Javed, Muhammad Faisal / Aslam, Fahid / Musarat, Muhammad Ali / Vatin, Nikolai Ivanovich	Concrete filled double steel tube columns incorporating UPVC pipes under uniaxial compressive load at ambient and elevated temperature	e00907
Zhao, Caiqi / Gu, Ye / Zheng, Tengteng / Wang, Gang / Wang, Yating / Li, Haoyue	The connection performance and bearing capacity of a single-layer combined lattice shell with aluminium alloy honeycomb panels	e00917
Joshi, Tejas / Dave, Urmil	Construction of pervious concrete pavement stretch, Ahmedabad, India – Case study	e00622
Amor, F. / Baudys, M. / Racova, Z. / Scheinherrová, L. / Ingrisova, L. / Hájek, P.	Contribution of TiO2 and ZnO nanoparticles to the hydration of Portland cement and photocatalytic properties of High Performance Concrete	e00965
Fongang, Brice Tene / Tassongwa, Bernard / Manefouet, Bertille Ilalie / Yemeli, Claude Martial / Ngapgue, François	Contribution to the flexible pavement design guides evaluation used in tropical zone: Application to lateritic materials of Bamougoum (West, Cameroon)	e01064
El-Mir, Abdulkader / Assaad, Joseph J. / Nehme, Salem G. / El-Hassan, Hilal	Correlating strength and durability to time-temperature profiles of high-performance mass concrete	e01055
Hemkemeier, Thiago A. / Almeida, Fernando C. R. / Sales, Almir / Klemm, Agnieszka J.	Corrosion monitoring by open circuit potential in steel reinforcements embedded in cementitious composites with industrial wastes	e01042
Liang, Ninghui / Mao, Jinwang / Yan, Ru / Liu, Xinrong / Zhou, Xiaohan	Corrosion resistance of multiscale polypropylene fiber-reinforced concrete under sulfate attack	e01065
Assaggaf, Rida Alwi / Maslehuddin, Mohammed / Al-Dulaijan, Salah Uthman / Al-Osta, Mohammed A. / Ali, Mohammed Rizwan / Shameem, Mohammed	Cost-effective treatment of crumb rubber to improve the properties of crumb-rubber concrete	e00881
Jana, Dipayan	Cracking of residential concrete foundations in eastern Connecticut, USA from oxidation of pyrrhotite	e00909
Hojati, Maryam / Rajabipour, Farshad / Radlińska, Aleksandra	Creep of alkali-activated cement mixtures	e00954
Al-Rousan, Rajai Z.	Cyclic Behavior of Alkali-Silica Reaction-Damaged Reinforced Concrete Beam-Column Joints Strengthened with FRP Composites	e00869
El-Mandouh, Mahmoud A. / Abu el-hassan, Khaled	Cyclic behavior of high strength lightweight concrete slab-edge column connections with and without openings	e00832
Chu, Liusheng / Wang, Shuaiqi / Li, Danda / Zhao, Jun / Ma, Xing	Cyclic behaviour of beam-column joints made of crumb rubberised concrete (CRC) and traditional concrete (TC)	e00867
Xie, Xiao / Qi, Li / Li, Xiaomeng	Deformation, strength and water variation characteristics of unsaturated compacted loess	e01129
Li, Yong / Wu, Qifan / Yu, Zijie / Liu, Yongqian	Destructive test study of the flexural load capacity of a full-scale reinforced concrete T-girder strengthened by externally prestressed CFRP plates	e01035
Paglia, C.	The deterioration asymmetry of engineering structures	e00980
Gao, Jie / Yao, Yuquan / Song, Liang / Xu, Jing / Yang, Jiangang	Determining the maximum permissible content of recycled asphalt pavement stockpile in plant hot-mix recycled asphalt mixtures considering homogeneity: A case study in China	e00961
Rodriguez-Juarez, Mario E. / Perez-Diaz, Edgar / Lopez-Dominguez, Guillermo I. / Picazo, Veronica Leyva / Valencia-Cruz, Daniel / Millan-Malo, Beatriz M. / Rodríguez-García, Mario E.	Development and characterization of lime-based stucco for modern construction and restoration applications based on ancient stuccoes from the "El Cerrito" pyramid, Querétaro, Mexico	e00875
Apicella, Annalisa / D’Arienzo, Lucia / Caridi, Sara / Pietrosanto, Arianna / Scarfato, Paola	Development of a multifunctional nanocomposite system for protection, consolidation and microbial growth prevention of porous stones: A case study for the conservation of tuff	e00993
Srikanth, Gowsijan / Fernando, Ashani / Selvaranjan, Kajanan / Gamage, J. C. P. H. / Ekanayake, Lesly	Development of a Plastering mortar using waste bagasse and rice husk ashes with sound Mechanical and Thermal properties	e00956
Lee, Jong-Han / Choi, Eunsoo / Kang, Joo-Won	Development of cement composite with high-temperature detection performance using green earth	e00969
Lin, Wei-Ting	Development of cementless binder for low thermal conductivity materials: Reactive ultra-fine fly ash mixed with co-fired fly ash	e00899
Ramos, Flávio James Humberto Tommasini Vieira / Marques, Maria de Fátima Vieira / Rodrigues, João Gabriel Passos / Aguiar, Vinícius de Oliveira / da Luz, Fernanda Santos / Garcez de Azevedo, Afonso Rangel / Monteiro, Sergio Neves	Development of novel geopolymeric foam composites coated with polylactic acid to remove heavy metals from contaminated water	e00795
Kim, Min Kyoung / Yoon, Seyoon / Kim, Dong joo	Different electrical voltage responses of cement composites under forward and backward current directions	e01118
Maghfouri, Mehdi / Alimohammadi, Vahid / Gupta, Rishi / Saberian, Mohammad / Azarsa, Pejman / Hashemi, Mohammad / Asadi, Iman / Roychand, Rajeev	Drying shrinkage properties of expanded polystyrene (EPS) lightweight aggregate concrete: A review	e00919
Huang, Daguan / Niu, Ditao / Su, Li / Pan, Du / Liu, YunHe	Durability of coral aggregate concrete under coupling action of sulfate, chloride and drying-wetting cycles	e01003
de Oliveira, Leandro B. / de Azevedo, Afonso R. G. / Marvila, Markssuel T. / Pereira, Elaine C. / Fediuk, Roman / Vieira, Carlos Maurício F.	Durability of geopolymers with industrial waste	e00839
Noman, Muhammad / Yaqub, Muhammad / Fahad, Muhammad / Butt, Faheem / Khalid, Basit	Dynamic characteristics of RC structures in short and long duration real fires	e01058
Yousuf, Farqad / Xiaosheng, Wei	Early strength development and hydration of cement pastes at different temperatures or with superplasticiser characterised by electrical resistivity	e00911
Luo, Tao / Yi, Yu / Liu, Fang / Sun, Qiang / Pan, Xiaofeng / Hua, Cheng	Early-age hydration and strength formation mechanism of composite concrete using molybdenum tailings	e01101
Choi, Seoung Ik / Park, Jun Kil / Han, Taek Hee / Pae, Junil / Moon, Juhyuk / Kim, Min Ook	Early-age mechanical properties and microstructures of Portland cement mortars containing different admixtures exposed to seawater	e01041
Li, Weiwen / Shumuye, Eskinder Desta / Shiying, Tang / Wang, Zike / Zerfu, Kefiyalew	Eco-friendly fibre reinforced geopolymer concrete: A critical review on the microstructure and long-term durability properties	e00894
Qian, Xin / Yang, Heng / Wang, Jialai / Fang, Yi / Li, Mengxiao	Eco-friendly treatment of carbon nanofibers in cementitious materials for better performance	e01126
Almusawi, Ali / Sengoz, Burak / Kaya Ozdemir, Derya / Topal, Ali	Economic and environmental impacts of utilizing lower production temperatures for different bitumen samples in a batch plant	e00987
Luo, Tao / Hua, Cheng / Liu, Fang / Sun, Qiang / Yi, Yu / Pan, Xiaofeng	Effect of adding solid waste silica fume as a cement paste replacement on the properties of fresh and hardened concrete	e01048
Tayeh, Bassam A. / Hakamy, Ahmad / Amin, Mohamed / Zeyad, Abdullah M. / Agwa, Ibrahim Saad	Effect of air agent on mechanical properties and microstructure of lightweight geopolymer concrete under high temperature	e00951
Cao, Qi / Nawaz, Usman / Jiang, Xin / Zhang, Lihua / Ansari, Wajahat Sammer	Effect of air-cooled blast furnace slag aggregate on mechanical properties of ultra-high-performance concrete	e01027
Tambara Júnior, Luís U. D. / Taborda-Barraza, Madeleing / Cheriaf, Malik / Gleize, Philippe J. P. / Rocha, Janaíde C.	Effect of bottom ash waste on the rheology and durability of alkali activation pastes	e00790
Ossa, Alexandra / Lerma, César / Flores, Mario / Gaxiola, Alberto	Effect of consolidation on the resilient response of soft soils in Mexico City	e00888
Chen, Xue-Fei / Jiao, Chu-Jie	Effect of construction wastes on the rheo-physical behavior of photocatalytic mortar	e01049
Chaiyaput, Salisa / Arwaedo, Nakib / Kingnoi, Namthip / Nghia-Nguyen, Trong / Ayawanna, Jiratchaya	Effect of curing conditions on the strength of soil cement	e01082
Runci, Antonino / Serdar, Marijana	Effect of curing time on the chloride diffusion of alkali-activated slag	e00927
Nassar, Roz-Ud-Din / Soroushian, Parviz / Balachandra, Anagi / Nassar, Shumayal / Weerasiri, Rankothge / Darsanasiri, Nalin / Abdol, Nastran	Effect of fiber type and content on the performance of extruded wood fiber cement products	e00968
Yin, Shenghua / Yan, Zepeng / Chen, Xun / Wang, Leiming	Effect of fly-ash as fine aggregate on the workability and mechanical properties of cemented paste backfill	e01039
Akhmetov, Daniyar / Akhazhanov, Sungat / Jetpisbayeva, Ainur / Pukharenko, Yuri / Root, Yelena / Utepov, Yelbek / Akhmetov, Akbulat	Effect of Low-Modulus Polypropylene Fiber on Physical and Mechanical Properties of Self-Compacting Concrete	e00814
Hu, Huan-xiao / Deng, Chao / Chen, Wei	The effect of magnetization conditions on the stability of cement grout	e01016
Ruslan, Ibragimov / Ruslan, Bogdanov / Evgenij, Korolev	The effect of metal and polypropylene fiber on technological and physical mechanical properties of activated cement compositions	e00882
Heo, Seong-Uk / Kim, Ji-Hyun / Oh, Seong Yong / Lim, Gwon / Nam, Sungmo / Kim, TaekSoo / Park, Hyunmin / Chung, Chul-Woo	Effect of moisture content and mix proportion of concrete on efficiency of laser scabbling	e01040
Li, Xian / Wang, Yan-Min / Wu, Shu-Jun / Wang, Hui-Ru / Liu, Xiao-Cun / Sun, Hua-Dong / Fan, Liang	Effect of montmorillonite modification on resistance to thermal oxidation aging of asphalt binder	e00971
Selsal, Zara / Karakaş, Ahmet Sertaç / Sayin, Baris	Effect of pavement thickness on stress distribution in asphalt pavements under traffic loads	e01107
Kandasamy, S. / Gowdhamramkarthik, P. / Ibrahim, S. Syed / Subashchandrabose, S. / Thulasirajan, K.	The effect of permeable formwork on durability and corrosion performance of concrete	e00838
Martínez-García, Rebeca / Sánchez de Rojas, M. I. / Jagadesh, P. / López-Gayarre, Fernando / Morán-del-Pozo, Julia M. / Juan-Valdés, Andrés	Effect of pores on the mechanical and durability properties on high strength recycled fine aggregate mortar	e01050
Sua-iam, Gritsada / Chatveera, Burachat	Effect of printed circuit board dust on the workability and mechanical properties of self-compacting concrete: A preliminary study	e00862
Shah, Syed Haroon Ali / Ali, Babar / Ahmed, Ghafur H. / Tirmazi, Syed Muhammad Talal / Ouni, Mohamed Hechmi El / Hussain, Iqrar	Effect of recycled steel fibers on the mechanical strength and impact toughness of precast paving blocks	e01025
Lou, Tiejiong / Wu, Sishun / Chen, Bo	Effect of reinforcement on the response of continuous steel-concrete composite beams	e00929
Kang, Choonghyun / Kim, Taewan	Effect of reverse-osmosis brine and sodium aluminate on the hydration properties and strength of alkali-activated slag cement	e01078
Guo, Qun / Li, Xiaozhen / Song, Yilin / Liu, Junzhe	Effect of rust inhibitor on the composition of steel passive film in carbonized concrete	e00892
Soares, Joadelio Chagas / de Azevedo, Jodimar Soares / Dias, Dylmar Penteado	Effect of temperature on metakaolin-quartz powder geopolymer binder with different combinations of silicates and hydroxides	e00813
Zhao, Minglei / Li, Jie / Xie, Yi Min	Effect of vibration time on steel fibre distribution and flexural behaviours of steel fibre reinforced concrete with different flowability	e01114
Liao, Yingdi / Wang, Xin / Wang, Lu / Yin, Zhengxing / Da, Bo / Chen, Da	Effect of waste oyster shell powder content on properties of cement-metakaolin mortar	e01088
Ngo, Dang Quang / Nguyen, Huy Cuong / Dinh, Huu Tai / Nguyen, Duy Tien / Mai, Dinh Loc	Effectiveness of carbon textile reinforced concrete in shear strengthening short-span corroded reinforced concrete beams	e00932
Khan, Mehran / Cao, Mingli / Xie, Chaopeng / Ali, Majid	Effectiveness of hybrid steel-basalt fiber reinforced concrete under compression	e00941
Ahmad, Shamsad / Bahraq, Ashraf A. / Shaqraa, Abbas Albu / Khalid, Hammad R. / Al-Gadhib, Ali H. / Maslehuddin, Mohammed	Effects of key factors on the compressive strength of metakaolin and limestone powder-based alkali-activated concrete mixtures: An experimental and statistical study	e00915
Shi, Dandan / Geng, Yongjuan / Li, Shaochun / Gao, Jing / Hou, Dongshuai / Jin, Zuquan / Liu, Ang	Efficacy and mechanism of graphene oxide modified silane emulsions on waterproof performance of foamed concrete	e00908
Asaad, Mohammad Ali / Huseien, Ghasan Fahim / Memon, Ruhal Pervez / Ghoshal, S. K. / Mohammadhosseini, Hossein / Alyousef, Rayed	Enduring Performance of Alkali-activated Mortars with Metakaolin as Granulated Blast Furnace Slag Replacement	e00845
Zniker, Houcine / Ouaki, Bennaceur / Bouzakraoui, Said / EbnTouhami, Mohamed / Mezouara, Hicham	Energy absorption and damage characterization of GFRP laminated and PVC-foam sandwich composites under repeated impacts with reduced energies and quasi-static indentation	e00844
Feng, Jun / Sun, WeiWei / Chen, Le / Chen, Bingcheng / Arkin, Emran / Du, Lufei / Pathirage, Madura	Engineered Cementitious Composites using Chinese local ingredients: Material preparation and numerical investigation	e00852
Tran, Van Mien / Nguyen, Le Thi / Nguyen, Thi Hai Yen	Enhancing the effectiveness of steam curing for cement paste incorporating fly ash based on long-term compressive strength and reaction degree of fly ash	e01146
Chindaprasirt, Prinya / Sriyoratch, Arkhom / Arngbunta, Anukun / Chetchotisak, Panatchai / Jitsangiam, Peerapong / Kampala, Apichit	Estimation of modulus of elasticity of compacted loess soil and lateritic-loess soil from laboratory plate bearing test	e00837
Al-Akhras, Nabil / Makableh, Yahia / Dagamseh, Doa’a	Evaluating composite nanomaterials to control corrosion of reinforcing steel using different tests	e00963
Pedroso, Gabriel Orquizas Mattielo / Ramos, Gabriel / Lins da Silva, Jefferson	Evaluating geosynthetic base stabilization on lateritic gravel and granular material under cyclic moving wheel loads	e00880
Kim, Ji-Sun / Lee, Jong-Young / Kim, Young-Ho / Kim, Dongchan / Kim, Jin / Han, Jung-Geun	Evaluating the eco-compatibility of mortars with feldspar-based fine aggregate	e00781
Xin, Jianda / Liu, Yi / Zhang, Guoxin / Wang, Zhenhong / Wang, Juan / Yang, Ning / Qiao, Yu	Evaluation of early-age thermal cracking resistance of high w/b, high volume fly ash (HVFA) concrete using temperature stress testing machine	e00825
Mendes, Beatryz C. / Pedroti, Leonardo G. / Vieira, Carlos Maurício F. / Carvalho, José Maria F. / Ribeiro, José Carlos L. / Albuini-Oliveira, Nathalia M. / Andrade, Igor Klaus R.	Evaluation Of Eco-efficient Geopolymer Using Chamotte And Waste Glass-based Alkaline Solutions	e00847
Sun, Zhilin / Ma, Yongtao / Liu, Shu / Li, Yawen / Qiu, Xiang / Luo, Zhenyu	Evaluation of engineering properties of Fiber-reinforced Usual-temperature Synthetic Pitch (USP) modified cold mix patching asphalt	e00997
Lavoie, Fernando Luiz / Kobelnik, Marcelo / Valentin, Clever Aparecido / da Silva Tirelli, Érica Fernanda / de Lurdes Lopes, Maria / Lins da Silva, Jefferson	Evaluation of exhumed HDPE geomembranes used as a liner in Brazilian shrimp farming ponds	e00809
Salihi, Mustapha / El Fiti, Maryam / Harmen, Yasser / Chhiti, Younes / Chebak, Ahmed / M’Hamdi Alaoui, Fatima Ezzahrae / Achak, Mounia / Bentiss, Fouad / Jama, Charafeddine	Evaluation of global energy performance of building walls integrating PCM: Numerical study in semi-arid climate in Morocco	e00979
Chakkor, Ouiame / Altan, Mehmet Fatih	Evaluation of metabentonite and metazeolite performance based geopolymers with metakaolin river sand replacement	e00924
Gan, Youwei / Li, Chuangmin / Zou, Junfang / Wang, Wei / Yu, Ting	Evaluation of the impact factors on the leaching risk of steel slag and its asphalt mixture	e01067
Lou, Benxing / Ma, Fuheng	Evolution on fracture properties of concrete during steam curing	e01105
Kannangara, Thathsarani / Joseph, Paul / Fragomeni, Sam / Guerrieri, Maurice	Existing Theories of Concrete Spalling and Test Methods relating to Moisture Migration Patterns upon Exposure to Elevated Temperatures – A Review	e01111
Li, Hao / Wang, Brad Jianhe / Wang, Libin / Wei, Yang	An experimental and modeling study on apparent bending moduli of cross-laminated bamboo and timber (CLBT) in orthogonal strength directions	e00874
Kamjou, Amir Shayan / Khaloo, Alireza / Hassanpour, Sina	Experimental and numerical investigation of minimum required fiber content in bending characteristics of 100 MPa UHPC-formulated concrete	e01066
El-Mawsly, Eslam Hatem / El-Kashif, Khaled Farouk Omar / Shawky, Ashraf Adel / Abdalla, Hany Ahmed	Experimental and numerical investigation on strengthening of RC flat slabs with central opening	e00974
Abdulfattah, Osayd / Alsurakji, Ihab H. / El-Qanni, Amjad / Samaneh, Mohammad / Najjar, Mohammad / Abdallah, Ramez / Assaf, Iyad	Experimental evaluation of using pyrolyzed carbon black derived from waste tires as additive towards sustainable concrete	e00938
Yang, Jiacheng / Doh, Jeung-Hwan / Yan, Kai / Zhang, Xin	Experimental investigation and prediction of shear capacity for UHPC beams	e01097
Chrysanidis, Theodoros A. / Panoskaltsis, Vassilis P.	Experimental investigation on cracking behavior of reinforced concrete tension ties	e00810
Mohe, Negiya Sefa / Shewalul, Yohannes Werkina / Agon, Elmer C.	Experimental investigation on mechanical properties of concrete using different sources of water for mixing and curing concrete	e00959
Aules, Wisam A. / Saeed, Yasir M. / Al-Azzawi, Hosam / Rad, Franz N.	Experimental investigation on short concrete columns laterally strengthened with ferrocement and CFRP	e01130
Zhang, Yubin / Wu, Lishan / Bao, Shihui / Zhang, Cong / Bangi, Toshiyuki	Experimental study and theoretical modeling for the flexural property of multi-scale hybrid fiber reinforced SHCC	e01083
Abadel, Aref / Abbas, Husain / Almusallam, Tarek / Alshaikh, Ibrahim M. H. / Khawaji, Mohammad / Alghamdi, Hussam / Salah, Abdulrahman A.	Experimental Study of Shear Behavior of CFRP Strengthened Ultra-High-Performance Fiber-Reinforced Concrete Deep Beams	e01103
Alvee, Ar Razi / Malinda, Rizka / Akbar, Alfie Muna / Ashar, Resa Dwi / Rahmawati, Cut / Alomayri, Thamer / Raza, Ali / Shaikh, Faiz Uddin Ahmed	Experimental study of the mechanical properties and microstructure of geopolymer paste containing nano-silica from agricultural waste and crystalline admixtures	e00792
Noroozi, Ashkan Gholipoor / Ajalloeian, Rassoul / Bayat, Meysam	Experimental study of the role of interface element in earth dams with asphalt concrete core - Case study: Mijran dam	e01004
Wang, Xiaodong / Du, Jiaxu / Li, Qiang	Experimental study on crushing of concrete columns by high voltage pulse discharge	e01090
Xu, Ying / Yang, Rongzhou / Chen, Peiyuan / Ge, Jinjin / Liu, Jiaxing / Xie, Haotian	Experimental study on energy and failure characteristics of rubber-cement composite short-column under cyclic loading	e00885
Zhou, Yuqi / Du, He / Liu, Yuhang / Liu, Jiankun / Liang, Siming	An experimental study on mechanical, shrinkage and creep properties of early-age concrete affected by clay content on coarse aggregate	e01135
Wang, Wei / Zhang, Xie-dong / Zhou, Xi-long / Zhang, Bai / Chen, Jun / Li, Chao-hui	Experimental study on shear performance of an advanced bolted connection in steel-concrete composite beams	e01037
Yang, Renhe / He, Tingshu / Guan, Mengqin / Xu, Yongdong / Ma, Xiaodong / Lin, Yike / Gui, Miaomiao / Ke, Yuliang	Experimental study on sulfate resistance of shotcrete with different liquid accelerators	e01100
Faghih Khorasani, Fatemeh / Kabir, Mohammad Zaman	Experimental study on the effectiveness of short fiber reinforced clay mortars and plasters on the mechanical behavior of adobe masonry walls	e00918
Wang, Liming / Song, Zikun / Zeng, Siyu / Liu, Junyun / Ma, Kun	Exploration of the load fatigue test method for cement concrete wheels	e00793
Silva Oliveira, Matheus / de Farias, Márcio Muniz / Silva, João Paulo Souza	Fatigue analysis of hot recycled asphalt mixtures with RAP incorporation	e01132
da Silva, Alisson Clay Rios / Almeida, Bianca Mendes / Lucas, Mathaus Moraes / Cândido, Verônica Scarpini / da Cruz, Kamila Sindy Pinheiro / Oliveira, Michelle Souza / Garcez de Azevedo, Afonso Rangel / Monteiro, Sergio Neves	Fatigue behavior of steel fiber reinforced geopolymer concrete	e00829
Nodari, Claudia / Crispino, Maurizio / Toraldo, Emanuele	Fatigue effects of embedding electric vehicles Charging Units into electrified road	e00848
Ahmad, Syed Ishtiaq / Ahmed, Zanzabil Binte / Ahmed, Tanvir	Feasibility of Sludge Generated In Water-based Paint Industries As Cement Replacement Material	e01119
Nguyen, Ngoc Tan / Bui, Tan-Trung / Bui, Quoc-Bao	Fiber reinforced concrete for slabs without steel rebar reinforcement: Assessing the feasibility for 3D-printed individual houses	e00950
El-Sayed, Taha A. / Erfan, Abeer M. / Abdelnaby, Ragab M. / Soliman, Mohamed K.	Flexural behavior of HSC beams reinforced by hybrid GFRP bars with steel wires	e01054
Abbas, Ebrahim M. A. / Ge, Yue / Zhang, Zhiwen / Chen, Yiwen / Ashour, Ashraf / Ge, Wenjie / Tang, Rong / Yang, Zhongping / Khailah, Ebrahim Y. / Yao, Shan / Sun, Chuanzhi	Flexural Behavior of UHPC Beam Reinforced with steel-FRP Composite bars	e01110
Alshannag, Mohammad J. / Charif, Abdulhamid / Alqarni, Ali S. / Nasser, Salman	Flexural performance and ductility of RC beams made using natural LWA	e00942
Zhang, Chao / Shi, Feiting / Cao, Peng / Liu, Ketong	The fracture toughness analysis on the basalt fiber reinforced asphalt concrete with prenotched three-point bending beam test	e01079
Lai, Yutao / Chen, Jianye / Hong, Qi / Li, Zhekai / Liu, Haitian / Lu, Benhao / Ma, Ruihao / Yu, Chenxiao / Sun, Rongjia / Demartino, Cristoforo / Narazaki, Yasutaka	Framework for long-term structural health monitoring by computer vision and vibration-based model updating	e01020
Khedmatgozar Dolati, Seyed Saman / Mehrabi, Armin	FRP sheet/jacket system as an alternative method for splicing prestressed-precast concrete piles	e00912
Kuźniar, Krystyna / Tatara, Tadeusz	Full-scale long-term monitoring of mine-induced vibrations for soil-structure interaction research using dimensionless response spectra	e00801
Behera, Biplab / Nanda, Radhikesh Prasad	Geogrid reinforced brick buildings for earthquake disaster mitigations	e01113
Bigman, Daniel P. / Day, Dominic J.	Ground penetrating radar inspection of a large concrete spillway: A case-study using SFCW GPR at a hydroelectric dam	e00975
Azevedo, Afonso R. G. / Lima, Thuany E. S. / Reis, Raphael H. M. / Oliveira, Michelle S. / Candido, Verônica S. / Monteiro, Sergio N.	Guaruman fiber: A promising reinforcement for cement-based mortars	e01029
Qu, Xiaoling / Zhao, Zhiguang / Yang, Xingshuo / Li, Xiuxin / Li, Siqi / Zhang, Zhenwei	Heat release characteristics of lime and time-dependent rheological behaviors of lime-activated fly ash pastes	e01043
Zegardło, Bartosz	Heat-resistant concretes containing waste carbon fibers from the sailing industry and recycled ceramic aggregates	e01084
Naenudon, Sakchai / Vilaivong, Anousit / Zaetang, Yuwadee / Tangchirapat, Weerachart / Wongsa, Ampol / Sata, Vanchai / Chindaprasirt, Prinya	High flexural strength lightweight fly ash geopolymer mortar containing waste ﬁber cement	e01121
Kim, Ki-Yeol / Kim, Young-Jin / Choi, Myoung-Sung	Horizontal–vertical ratio for concrete pumping pipe	e00996
Ma, Xiaodong / He, Tingshu / Xu, Yongdong / Yang, Renhe / Sun, Yuhao	Hydration reaction and compressive strength of small amount of silica fume on cement-fly ash matrix	e00989
Saif, Mohamed S. / El-Hariri, Mohamed O. R. / Sarie-Eldin, Ahmed I. / Tayeh, Bassam A. / Farag, Mohamed F.	Impact of Ca+ content and curing condition on durability performance of metakaolin-based geopolymer mortars	e00922
Liu, Liang / Yang, Gui / He, Jianxin / Liu, Hanlong / Gong, Jingwei / Yang, Haihua / Yang, Wu / Joyklad, Panuwat	Impact of fibre factor and temperature on the mechanical properties of blended fibre-reinforced cementitious composite	e00773
Al-Rousan, Rajai Z.	Impact of sulfate damage on the behavior of full-scale concrete bridge deck slabs reinforced with FRP bars	e01030
Zhang, Haihong / Fan, Shanzhi / Lang, Lei / Gu, Kang / Shi, Rui / Xue, Ke / Li, Desheng	An Impervious Sand Used as Separation Layer in Collapsible Loess Embankment: A Case Study	e01106
Klyuev, Sergey / Sevostyanov, Vladimir / Sevostyanov, Maxim / Fediuk, Roman / Sabitov, Linar / Ageeva, Marina / Fomina, Ekaterina / Klyuev, Alexander / Protsenko, Anastasia / Goryagin, Pavel / Babukov, Vladimir / Shamgulov, Roman	Improvement of technical means for recycling of technogenic waste to construction fiber	e01071
Adriman, Ramzi / Bin M. Ibrahim, Israr / Huzni, Syifaul / Fonna, Syarizal / Ariffin, Ahmad Kamal	Improving half-cell potential survey through computational inverse analysis for quantitative corrosion profiling	e00854
Nawaukkaratharnant, Nithiwach / Thueploy, Adisak / Khunthon, Srichalai / Nilpairach, Siriphan / Theerapapvisetpong, Apirat	Improving the technological properties of red stoneware tiles derived from Ratchaburi red clay by the addition of iron oxide	e00983
Binyaseen, Adel M.	Improving thermal performance of existing uninsulated R.C. domes through passive cooling measures using polyurethane foam in double skin layer in hot climate.	e00866
Guo, Rui / Zhou, Fei / Nian, Tengfei	Indices relation and statistical probability analysis of physical and mechanical performance of asphalt mixtures	e01091
Gao, X. X. / Deby, F. / Gourbeyre, Y. / Samson, G. / Garcia, S. / Arliguie, G.	Influence of catholytes on the generation of steel corrosion in concrete with accelerated chloride migration method	e01123
Zhang, Ziwei / Li, Guoxin / Zhang, Ge / Niu, Mengdie	Influence of liquid accelerators on shotcrete in karst area tunnels	e01002
Zhou, Yue / Wang, Zhongping / Zhu, Zheyu / Chen, Yuting / Wu, Kai / Huang, Haoliang / Anvarovna, Kasimova Guzal / Xu, Linglin	Influence of metakaolin and calcined montmorillonite on the hydration of calcium sulphoaluminate cement	e01104
Mashri, M. O. M. / Megat Johari, Megat Azmi / Ahmad, Zainal Arifin / Mijarsh, M. J. A.	Influence of milling process of palm oil fuel ash on the properties of palm oil fuel ash-based alkali activated mortar	e00857
Hussien, Reham M. / Abd el-Hafez, L. M. / Mohamed, R. A. S. / Serag Faried, A. / fahmy, Naglaa G.	Influence of nano waste materials on the mechanical properties, microstructure, and corrosion resistance of self-compacted concrete	e00859
Farooq, Muhammad Ahmad / Fahad, Muhammad / Ali, Babar / Ullah, Shahid / Ouni, Mohamed Hechmi El / Elhag, Ahmed Babeker	Influence of nylon fibers recycled from the scrap brushes on the properties of concrete: Valorization of plastic waste in concrete	e01089
Junior, José Alexandre Linhares / Garcez de Azevedo, Afonso Rangel / Teixeira Marvila, Markssuel / Teixeira, Silvio Rainho / Fediuk, Roman / Vieira, Carlos Maurício Fontes	Influence of processing parameters variation on the development of geopolymeric ceramic blocks with calcined kaolinite clay	e00897
Amin, Mohamed / Hakeem, Ibrahim Y. / Zeyad, Abdullah M. / Tayeh, Bassam A. / Maglad, Ahmed M. / Agwa, Ibrahim Saad	Influence of recycled aggregates and carbon nanofibres on properties of ultra-high-performance concrete under elevated temperatures	e01063
Resende, Maurício M. / Gambare, Enrico B. / Silva, Letícia A. / Cordeiro, Yuri de S. / Almeida, Eneida / Salvador, Renan P.	Infrared thermal imaging to inspect pathologies on façades of historical buildings: A case study on the Municipal Market of São Paulo, Brazil	e01122
Sobhy, Caroline S. / Tawfik, Taher A. / El Hafe, G. M. Abd. / Serag Faried, A.	Insights on the influence of nano-Titanium dioxide and nano-Zinc oxide on mechanical properties and inhibiting of steel reinforcement	e01017
Lotte, Yena Chae / Kim, Sean Hay	Interstitial Hygrothermal Analysis for Retrofitting Exterior Concrete Wall of Modern Heritage Building in Korea	e00797
Hanandeh, Shadi	Introducing mathematical modeling to estimate pavement quality index of flexible pavements based on genetic algorithm and artificial neural networks	e00991
Zhu, Weiwei / Feng, Qingge / Luo, Qi / Yan, Jun / Lu, Chun	Investigating the effect of polycarboxylate-ether based superplasticizer on the microstructure of cement paste during the setting process	e00999
Pham, Khoa Vo Anh / Nguyen, Khoa Tan / Le, Tuan Anh / Lee, Kihak	Investigation of impact behavior of innovative non-curing steel fiber geopolymer composites	e01011
Cogurcu, Mustafa Tolga	Investigation of mechanical properties of red pine needle fiber reinforced self-compacting ultra high performance concrete	e00970
Abu-Bakr, Masood / Mahmood, Hersh F. / Mohammed, Azad A.	Investigation of metakaolin and steel fiber addition on some mechanical and durability properties of roller compacted concrete	e01136
Shatarat, Nasim / Salman, Donia	Investigation of punching shear behavior of flat slabs with different types and arrangements of shear reinforcement	e01028
Şeker, Burçin Şenol / Gökçe, Murat / Toklu, Kenan	Investigation of the effect of silica fume and synthetic foam additive on cell structure in ultra-low density foam concrete	e01062
Kiran, Tattukolla / Anand, N. / Mathews, Mervin Ealiyas / Kanagaraj, Balamurali / Diana Andrushia, A. / Lublóy, Éva / Jayakumar, G.	Investigation on improving the residual mechanical properties of reinforcement steel and bond strength of concrete exposed to elevated temperature	e01128
Bowen, Feng / Jiesheng, Liu / Jing, Wei / Yaohua, Chen / Tongtong, Zhang / Xiaoming, Tan / Zhengguang, Sun	Investigation on the impact of different activator to solid ratio on properties and micro-structure of metakaolin geopolymer	e01127
Kangavar, Mohammad Eyni / Lokuge, Weena / Manalo, Allan / Karunasena, Warna / Frigione, Mariaenrica	Investigation on the properties of concrete with recycled polyethylene terephthalate (PET) granules as fine aggregate replacement	e00934
Junwei, Zhang / Zhe, Yang / Shijie, Li / Hongjian, Peng	Investigation onmechanical property adjustment of multi-scale hybrid fiber-reinforced concrete	e01076
Joyklad, Panuwat / Ali, Nazam / Yooprasertchai, Ekkachai / Jaffar, Syed Taseer Abbas / Magbool, Hassan M. / Hussain, Qudeer / Chaiyasarn, Krisada	An investigative study for the prediction of compressive strength of cement-clay interlocking (CCI) hollow brick masonry walls	e01001
Longhi, Márlon A. / Rodríguez, Erich D. / Zhang, Zuhua / Torres, Sandro M. / Barata, Márcio S. / Kirchheim, Ana P.	Kaolin mining waste to produce geopolymers: physicomechanical properties and susceptibility to efflorescence formation	e00846
Spadoni, Sara / Graziani, Andrea / Canestrari, Francesco	Laboratory and field investigation of grouted macadam for semi-flexible pavements	e00853
Tembhurkar, Sandeep / Ralegaonkar, Rahul / Azevedo, Afonso / Madurwar, Mangesh	Low cost geopolymer modular toilet unit for ODF India – A case study	e00937
Larrinaga, Pello / Garmendia, Leire / Chastre, Carlos / San-José, Jose-Tomas	Low-grade RC beams strengthened with TRM composite based on basalt, carbon and steel textiles: Experimental and analytical study	e00906
Wakjira, Tadesse Gemeda / Ebead, Usama / Shahria Alam, M.	Machine Learning-Based Shear Capacity Prediction and Reliability Analysis of RC Beams Strengthened With Inorganic Composites	e01008
Akın, Süleyman Kamil / Kartal, Saruhan / Müsevitoğlu, Abdullah / Sancıoğlu, Sadrettin / Zia, Ahmad Javid / İlgün, Abdulkerim	Macro and micro polypropylene fiber effect on reinforced concrete beams with insufficient lap splice length	e01005
Han, Weicheng / Pei, Sumin / Liu, Fang	Material characterization of the brick in the Ming Dynasty heritage wall of Pianguan County: A case study	e00940
Korkmaz, Abdul Vahap	Mechanical activation of diabase and its effect on the properties and microstructure of Portland cement	e00868
Abdulridha, Shereen Qasim / Nasr, Mohammad Salah / Al-Abbas, Bahaa Hussain / Hasan, Zaid Ali	Mechanical and structural properties of waste rope fibers-based concrete: An experimental study	e00964
Suksiripattanapong, Cherdsak / Jenpiyapong, Krishnaphat / Tiyasangthong, Sermsak / Krittacom, Bundit / Phetchuay, Chayakrit / Tabyang, Wisitsak	Mechanical and thermal properties of lateritic soil mixed with cement and polymers as a non-bearing masonry unit	e00962
Hoang, Viet Hai / Nguyen, Quang Tuan / Tran, Anh Tuan / Tran, Thi Cam Ha / Do, Tu Anh	Mechanical behavior of the asphalt wearing surface on an orthotropic steel bridge deck under cyclic loading	e00836
Ouni, Mohamed Hechmi El / Shah, Syed Haroon Ali / Ali, Asif / Muhammad, Shoaib / Mahmood, Muhammad Sarmad / Ali, Babar / Marzouki, Riadh / Raza, Ali	Mechanical performance, water and chloride permeability of hybrid steel-polypropylene fiber-reinforced recycled aggregate concrete	e00831
Tahwia, Ahmed M. / Elgendy, Gamal M. / Amin, Mohamed	Mechanical properties of affordable and sustainable ultra-high-performance concrete	e01069
Wang, Huailiang / Wu, Yuhui / Cheng, Baoquan	Mechanical properties of alkali-activated concrete containing crumb rubber particles	e00803
Eisa, Mohamed Samir / Mohamady, Ahmed / Basiouny, Mohamed E. / Abdulhamid, Ayman / Kim, Jong R.	Mechanical properties of asphalt concrete modified with carbon nanotubes (CNTs)	e00930
Liu, Bing / Zhang, Xuanyu / Ye, Junpeng / Liu, Xiaoyan / Deng, Zhiheng	Mechanical properties of hybrid fiber reinforced coral concrete	e00865
Radeef, Hasanain Radhi / Hassan, Norhidayah Abdul / Katman, Herda Yati / Mahmud, Mohd Zul Hanif / Abidin, Ahmad Razin Zainal / Ismail, Che Ros	The mechanical response of dry-process polymer wastes modified asphalt under ageing and moisture damage	e00913
Przybyłek, Grzegorz / Wiȩckowski, Jȩdrzej	Method of assessing the technical condition and failure of overhead cranes designed to work in difficult conditions	e00811
Yu, Zihao / Zhang, Tongwei / Deng, Yongfeng	The micro-facial characteristics and mechanical behavior of metakaolin and steel fibers modified concrete at high fluidity	e01019
Amiri, Mohammad / Sanjari, Mahmood / Porhonar, Fatemeh	Microstructural evaluation of the cement stabilization of hematite-rich red soil	e00935
Haddaji, Younesse / Majdoubi, Hicham / Mansouri, Said / Alomayri, Thamer Salman / Allaoui, Driss / Manoun, Bouchaib / Oumam, Mina / Hannache, Hassan	Microstructure and flexural performances of glass fibers reinforced phosphate sludge based geopolymers at elevated temperatures	e00928
Wu, Qian / Mao, Xuesong / Zhao, Ying / Zhou, Hao / Huang, Wanjun	Model experiments to study the hydrothermal variation and resilient modulus of soil subgrade subjected to freeze-thaw conditions	e01145
Shabani, Amirhosein / Feyzabadi, Mohyeddin / Kioumarsi, Mahdi	Model Updating of a Masonry Tower based on Operational Modal Analysis: The Role of Soil-structure Interaction	e00957
Shilar, Fatheali A. / Ganachari, Sharanabasava V. / Patil, Veerabhadragouda B. / Khan, T. M. Yunus / Dawood Abdul Khadar, Shaik	Molarity activity effect on mechanical and microstructure properties of geopolymer concrete: A review	e01014
Czarnecki, Slawomir / Sadowski, Łukasz	Morphological properties of the cement skin: Understanding the effect of contact with formwork	e01007
Clarke, Richard P.	Natural disaster mitigation using advanced ferrocement – Future research directions for improved building resilience	e00990
Bakhti, R. / Benahmed, B. / Laib, A. / Alfach, M. T.	New approach for computing damage parameters evolution in plastic damage model for concrete	e00834
Cai, Jiwei / Chen, Jin-ge / Shi, Junli / Tian, Qing / Xu, Gelong / Du, Yun	A novel approach to evaluate the clogging resistance of pervious concrete	e00864
Ekanayake, I. U. / Meddage, D. P. P. / Rathnayake, Upaka	A novel approach to explain the black-box nature of machine learning in compressive strength predictions of concrete using Shapley additive explanations (SHAP)	e01059
Zinkaah, Othman Hameed / Alridha, Zainab / Alhawat, Musab	Numerical and theoretical analysis of FRP reinforced geopolymer concrete beams	e01052
Nguyen, Hoang-Quan / Tran, Bao-Viet / Vu, Thai-Son	Numerical approach to predict the flexural damage behavior of pervious concrete	e00946
Zheng, Zhishan / Tian, Cong / Wei, Xiaosheng / Zeng, Chen	Numerical investigation and ANN-based prediction on compressive strength and size effect using the concrete mesoscale concretization model	e01056
Attia, Mohamed / Ibrahim, Amr / El-Kateb, Mahmoud / Elkateb, Tamer / Khalil, Ayman	Numerical investigation for strengthened RC footings with square concrete jacketing	e00807
Saidin, Siti Shahirah / Abdul Kudus, Sakhiah / Jamadin, Adiza / Anuar, Muhamad Azhan / Amin, Norliyati Mohd / Ibrahim, Zainah / Zakaria@Ya, Atikah Bt / Sugiura, Kunitomo	Operational modal analysis and finite element model updating of ultra-high-performance concrete bridge based on ambient vibration test	e01117
Wang, Xiao-Yong	Optimal design of sustainable slag concrete considering sustained stress and carbonation resistance	e00958
Sun, Zhongke / Yang, Shutong / Hang, Meiyan / Wang, Junhao / Yang, Tiange	Optimization design of ultrahigh-performance concrete based on interaction analysis of multiple factors	e00858
Hamada, Hussein M. / Al-Attar, Alyaa A. / Tayeh, Bassam / Yahaya, Fadzil Bin Mat	Optimizing the concrete strength of lightweight concrete containing nano palm oil fuel ash and palm oil clinker using response surface method	e01061
Rejeb, Oussama / Almarzouqi, Naseebah / Alhanaee, Nawal / Sinclair, Timothy / Alansari, Maryam / Abdulla, Fatma / Alsalami, Marwa / Ghenai, Chaouki	Parametric analysis and new performance correlation of the surface conventional rigid pavement temperature	e00923
Abraik, Emad / Asteetah, Ateeyah	Parametric analysis of slotted concrete shear walls reinforced with shape memory alloy barss	e00806
Bieliatynskyi, Andrii / Yang, Shilin / Pershakov, Valerii / Shao, Meiyu / Ta, Mingyang	Peculiarities of the use of the cold recycling method for the restoration of asphalt concrete pavements	e00872
Naveed, Muhammad / Raza, Muhammad Azeem / Mehmood, Raza	Performance analyses of conventional hot mix asphalt with waste additives	e00850
Hu, Shi / Cai, Haibing / Yuan, Zhu / Cheng, Leike	Performance comparison test of new sprayed engineered cementitious composites and C25 sprayed concrete	e01139
Mashaan, Nuha / Chegenizadeh, Amin / Nikraz, Hamid	Performance of PET and nano-silica modified stone mastic asphalt mixtures	e01044
Pham, Tung Thanh / Kurihashi, Yusuke / Masuya, Hiroshi	Performance of reinforced concrete beam with cushion subjected to impact loading	e00893
Sayed, Ahmed M. / Alanazi, Hani	Performance of Steel Metal Prepared Using Different Welding Cooling Methods	e00953
Yew, Ming Kun / Beh, Jing Han / Yew, Ming Chian / Lee, Foo Wei / Saw, Lip Huat / Lim, Siong Kang	Performance of surface modification on bio-based aggregate for high strength lightweight concrete	e00910
Dawood, Eethar Thanon / Mohammed, Waseem Thabit / Plank, Johann	Performance of sustainable mortar using calcined clay, fly ash, limestone powder and reinforced with hybrid fibers	e00849
Klyuev, Sergey / Fediuk, Roman / Ageeva, Marina / Fomina, Ekaterina / Klyuev, Alexander / Shorstova, Elena / Zolotareva, Svetlana / Shchekina, Natalia / Shapovalova, Anastasia / Sabitov, Linar	Phase formation of mortar using technogenic fibrous materials	e01099
Jeong, Jena / Alemu, Abel Shiferaw / Park, Solmoi / Lee, Hyo Kyoung / Liyew, Gebremicael / Ramézani, Hamidréza / Papadakis, Vagelis G. / Kim, Hyeong-Ki	Phase profiling of carbonated cement paste: Quantitative X-ray diffraction analysis and numerical modeling	e00890
Chen, Xue-Fei / Jiao, Chu-Jie	A photocatalytic mortar prepared by tourmaline and TiO2 treated recycled aggregates and its air-purifying performance	e01073
Vouffo, Marcel / Tiomo, Idriss Franklin / Kemtchou Fanmi, Hervé / Kamga Djoumen, Tatiana / Ngapgue, François	Physical and mechanical characterization of pyroclastic materials in Baleng area (Bafoussam, West-Cameroon): implication for use in civil engineering	e00916
Liu, Jingbo / Zhuge, Yan / Ma, Xing / Liu, Ming / Liu, Yue / Wu, Xuan / Xu, Haolan	Physical and mechanical properties of expanded vermiculite (EV) embedded foam concrete subjected to elevated temperatures	e01038
Hasan, Mustafa Fahmi / Canakci, Hanifi	Physical-mechanical assessment of full-scale soil-cement column constructed in clayey soil	e00943
Ratanawilai, Thanate / Srivabut, Chainarong	Physico-mechanical properties and long-term creep behavior of wood-plastic composites for construction materials: Effect of water immersion times	e00791
Sun, Ming / Bennett, Terry / Visintin, Phillip	Plastic and early-age shrinkage of ultra-high performance concrete (UHPC): Experimental study of the effect of water to binder ratios, silica fume dosages under controlled curing conditions	e00948
Kiran, Tattukolla / Anand, N. / Mathews, Mervin Ealiyas / Diana Andrushia, A. / Walls, Richard / Kanagaraj, Balamurali / Lublóy, Éva	Post-fire behaviour and improving the performance of hot rolled open sections subjected to standard fire exposure	e01021
Stanislas, Tido Tiwa / Komadja, Gbétoglo C. / Nafu, Yakum R. / Mahamat, Assia A. / Mejouyo, P. W. H. / Tendo, Josepha F. / Njeugna, Ebenezer / Onwualu, Peter A. / Savastano Junior, Holmer	Potential of raffia nanofibrillated cellulose as a reinforcement in extruded earth-based materials	e00926
Ayrilmis, Nadir / Gürsoy, Samet	Potential use of metalworking fluid as surface additive for improving surface properties, technological properties, and formaldehyde emission of fiberboard	e00952
Wang, Liming / Song, Zikun / Gong, Chun	Power ultrasound on asphalt viscoelastic behavior analysis	e01012
Ding, Faxing / Cao, Zheya / Lyu, Fei / Huang, Shijian / Hu, Mingwen / Lin, Qitao	Practical design equations of the axial compressive capacity of circular CFST stub columns based on finite element model analysis incorporating constitutive models for high-strength materials	e01115
Morsy, Alaa M. / Abd Elmoaty, Abd Elmoaty M. / Harraz, Abdelrhman B.	Predicting mechanical properties of engineering cementitious composite reinforced with PVA using artificial neural network	e00998
Sheng, Xingwang / Zhou, Tieming / Huang, Shiji / Cai, Chenzhi / Shi, Tao	Prediction of vertical temperature gradient on concrete box-girder considering different locations in China	e01026
Huang, Bo-Tao / Zhu, Ji-Xiang / Weng, Ke-Fan / Huang, Jun-Qi / Dai, Jian-Guo	Prefabricated UHPC-concrete-ECC underground utility tunnel reinforced by perforated steel plate: Experimental and numerical investigations	e00856
Şahinöz, Melih / Aruntas, Huseyin Yilmaz / Gürü, Metin	Processing of polymer wood composite material from pine cone and the binder of phenol formaldehyde/PVAc/molasses and improvement of its properties	e01013
Zeyad, Abdullah M. / Magbool, Hassan M. / Tayeh, Bassam A. / Garcez de Azevedo, Afonso Rangel / Abutaleb, Ahmed / Hussain, Qudeer	Production of geopolymer concrete by utilizing volcanic pumice dust	e00802
Xu, Zhenhai / Zhu, Zhaohui / Zhao, Yasong / Guo, Zhaoheng / Chen, Gaofeng / Liu, Cheng / Gao, Jianming / Chen, Xuemei	Production of sustainable plastering mortar containing waste clay brick aggregates	e01120
Yang, Dingyi / Liu, Miao / Zhang, Zhibin / Yao, Pengpeng / Ma, Zhiming	Properties and modification of sustainable foam concrete including eco-friendly recycled powder from concrete waste	e00826
Al-Absi, Zeyad Amin / Hafizal, Mohd Isa Mohd / Ismail, Mazran / Awang, Hanizam / Al-Shwaiter, Abdullah	Properties of PCM-based composites developed for the exterior finishes of building walls	e00960
Suksiripattanapong, Cherdsak / Sakdinakorn, Ratchanon / Tiyasangthong, Sermsak / Wonglakorn, Nattiya / Phetchuay, Chayakrit / Tabyang, Wisitsak	Properties of soft Bangkok clay stabilized with cement and fly ash geopolymer for deep mixing application	e01081
Bang, Jin Soo / Kwon, Yangsu / Ahn, Jin-Hee / Yim, Hong Jae	Pull-out behavior evaluation of torque-controlled expansion anchors under various installation conditions of concrete	e00796
Deifalla, A.	Punching shear strength and deformation for FRP-reinforced concrete slabs without shear reinforcements	e00925
Martínez, I. / Martínez, E.	Qualitative timber structure assessment with passive IR thermography. Case study of sources of common errors	e00789
Shin, Tae Yong / Kim, Yong-Hyok / Park, Cho-Bum / Kim, Jae Hong	Quantitative evaluation on the pumpability of lightweight aggregate concrete by a full-scale pumping test	e01075
Xu, Jinjun / Liu, Yi / Simi, Alessandra / Zhang, Ji	Recycling and reuse of construction and demolition waste: From the perspective of national natural science foundation-supported research and research-driven application	e00876
Qaidi, Shaker M. A. / Tayeh, Bassam A. / Zeyad, Abdullah M. / de Azevedo, Afonso R. G. / Ahmed, Hemn Unis / Emad, Wael	Recycling of mine tailings for the geopolymers production: A systematic review	e00933
Naoom, Emad Noel / Mohammad, Khalaf Ibrahem	Rehabilitation and Repair of AL- Tahera Church in AL- Hamdaniya District, Mosul City, Iraq	e00787
Chun, Booki / Kim, Soonho / Yoo, Doo-Yeol	Reinforcing effect of surface-modified steel fibers in ultra-high-performance concrete under tension	e01125
da Silva, Sérgio Roberto / Cimadon, Felipe Nunes / Borges, Pietra Moraes / Schiavon, Jessica Zamboni / Possan, Edna / de Oliveira Andrade, Jairo José	Relationship between the mechanical properties and carbonation of concretes with construction and demolition waste	e00860
Oikonomopoulou, Erato Ch. / Palieraki, Vasiliki A. / Sfikas, Ioannis P. / Trezos, Constantinos G.	Reliability and limitations of GPR for identifying objects embedded in concrete – Experience from the lab	e00898
Abualreesh, Abdulrahman M. / Tuken, Ahmet / Albidah, Abdulrahman / Siddiqui, Nadeem A.	Reliability-based optimization of shear walls in RC shear wall-frame buildings subjected to earthquake loading	e00978
Ammash, Haider K. / Kadhim, Safa S. / Dhahir, Mohammed K.	Repairing half-loaded flat slabs against punching shear using steel stiffeners	e01032
Wang, Her-Yung / Tsai, Shen-Lun / Hung, Chang-Chi / Jian, Ting-Yu	Research on engineering properties of cement mortar adding stainless steel reduction slag and pozzolanic materials	e01144
Guo, Lei / Zhang, Jinfeng / Guo, Lixia / Wang, Jia / Shen, Weiping	Research on profile design criteria of 100 m CSG dams	e01137
Cosgun, Turgay / Sayin, Baris / Gunes, Baris / Mangir, Atakan	Retrofitting technique effectiveness and seismic performance of multi-rise RC buildings: A case study	e00931
Niu, Yonghui / Cheng, Haiyong / Wu, Shunchuan / Sun, Junlong / Wang, Jiaxin	Rheological properties of cemented paste backfill and the construction of a prediction model	e01140
Yun, Kyong Ku / Hossain, Mohammad Shakhawat / Han, Seungyeon / Seunghak, Choi	Rheological, mechanical properties, and statistical significance analysis of shotcrete with various natural fibers and mixing ratios	e00833
Somna, Rattapon / Saowapun, Teerapon / Somna, Kiatsuda / Chindaprasirt, Prinya	Rice Husk Ash and Fly Ash Geopolymer Hollow Block Based on NaOH Activated	e01092
Song, Hui / Yao, Jinwei / Xiang, Junzheng	The role of aggregate and cement paste in the deterioration of the transitional interface zone of pervious concrete during freeze-thaw cycles	e01086
Parthiban, Devarajan / Vijayan, Dhanasingh Sivalinga / Koda, Eugeniusz / Vaverková, Magdalena Daria / Piechowicz, Konrad / Osinski, Piotr / Duc, Bui Van	Role of industrial based precursors in the stabilization of weak soils with geopolymer – A review	e00886
Murad, Yasmin / Abdel-Jabbar, Haneen	Shear behavior of RC beams prepared with basalt and polypropylene fibers	e00835
Zhou, Linyun / Wan, Shui	Shear behavior of UHPC beams with small shear span to depth ratios based on MSTM	e01134
Alqarni, Ali S. / Albidah, Abdulrahman S. / Abadel, Aref A.	Shear performance of reinforced concrete deep beams using different coarse aggregates under the effect of elevated temperatures	e01087
Lam, Lalin / Khan, Arslan Qayyum / Pimanmas, Amorn	Shear Strengthening of RC Deep Beams using Glass Chopped Strand Mat (GCSM) Composite	e01018
Pelé-Peltier, Antoine / Fabbri, Antonin / Morel, Jean-Claude / Hamard, Erwan / Lhenry, Maxime	A similitude relation to assessing the compressive strength of rammed earth from scale-down samples	e00921
Kaloop, Mosbeh R. / Samui, Pijush / Iqbal, Mudassir / Hu, Jong Wan	Soft computing approaches towards tensile strength estimation of GFRP rebars subjected to alkaline-concrete environment	e00955
Lin, Pei-Ju / Kuo, Fan-Chu	The space image research base on the construction method of surface texture of the cement tiles	e00902
Soltani, Amin / Taheri, Abbas / Deng, An / O’Kelly, Brendan C.	Stabilization of a highly expansive soil using waste-tire-derived aggregates and lime treatment	e01133
Nangulama, Horris K. / Jian, Zhou / Xiao, Zhang / Zhu, Jian-Cai / Yuan, Feng-Feng	Stage-by-stage control effect field analysis of steel material servo enhanced support system on lateral displacement and bending moment during deep basement excavation	e01068
Srividya, T. / Kannan Rajkumar, P. R. / Sivasakthi, M. / Sujitha, A. / Jeyalakshmi, R.	A State-of-the-art on Development of Geopolymer Concrete and Its Field Applications	e00812
Jaraullah, Mohammad Nafa'a / Dawood, Eethar Thanon / Abdullah, Mafaz Hani	Static and impact mechanical properties of ferrocement slabs produced from green mortar	e00995
Wang, Youde / Zhou, Xiaodong / Wang, Hao / Kong, Deliang / Xu, Shanhua	Stochastic constitutive model of structural steel based on random field of corrosion depth	e00972
Mahdi, Shaik Numan / Babu R, Dushyanth V. / Hossiney, Nabil / Abdullah, Mohd Mustafa Al Bakri	Strength and durability properties of geopolymer paver blocks made with fly ash and brick kiln rice husk ash	e00800
Sumanasena, Varuna / Rajabipour, Ali / Bazli, Milad / Kutay, Cat / Guo, Dongxiu	Strength and erosion resistance of mudbrick as an alternative local material for Australia’s Northern Territory remote housing	e01023
Lan, Xuejiang / Zhang, Xiao / Hao, Zhongqing / Wang, Yongbao	Strength and shrinkage properties of cement stabilized macadam bases incorporating 0–2.36 millimetre recycled fine aggregate	e00984
Yang, Jingyu / Guo, Yinchuan / Tan, Jingjing / Shen, Aiqin / Wu, Hua / Li, Yue / Lyu, Zhenghua / Wang, Lusheng	Strength deterioration and crack dilation behavior of BFRC under dynamic fatigue loading	e01051
Nasr, Ahmed A. / Chen, Songgui / Wang, Yang / Jin, Feng / Qiu, Liu-Chao	Strength evaluation of a new underwater concrete type	e00884
Yaswanth, K. K. / Revathy, J. / Gajalakshmi, P.	Strength, durability and micro-structural assessment of slag-agro blended based alkali activated engineered geopolymer composites	e00920
Odeh, Noor Aamer / Al-Rkaby, Alaa H. J.	Strength, Durability, and Microstructures characterization of sustainable geopolymer improved clayey soil	e00988
Nassar, Roz-Ud-Din / Singh, Navdeep / Varsha, Samridhi / Sai, A.Ravindra / Sufyan-Ud-Din, Muhammad	Strength, electrical resistivity and sulfate attack resistance of blended mortars produced with agriculture waste ashes	e00944
Kaloop, Mosbeh R. / Samui, Pijush / Kim, Jae-Joung / Hu, Jong Wan / Ramzy, Ahmed	Stress intensity factor prediction on offshore pipelines using surrogate modeling techniques	e01045
Soh, Wei Siang / Rashid, Raizal S. M. / Amran, Mugahed / Alengaram, U. Johnson	Structural behavior of piles under vehicular collision load on bridge substructure – A case study	e00936
Donini, Giovanni / Greco, Silvia / Molari, Luisa / Zanetti, Anna	Structural design of an Italian bamboo house in an Italian regulatory context: Revisiting a small building built in Costa Rica with tropical bamboo	e00891
Bieliatynskyi, Andrii / Yang, Shilin / Pershakov, Valerii / Shao, Meiyu / Ta, Mingyang	Study of crushed stone-mastic asphalt concrete using fiber from fly ash of thermal power plants	e00877
Wang, Wei-Chien / Xue, Jia-Chen / Huang, Wei-Hsing	Study of engineering properties of low-pH self-compacting concrete for concrete plug	e01060
Gonçalves, Dayana Keitty Carmo / Lana, Sebastiana Luiza Bragança / Sales, Rosemary Bom Conselho / Paulino Aguilar, Maria Teresa	Study of metakaolins with different amorphities and particle sizes activated by KOH and K2SiO3	e00778
Goli, Ahmad	The study of the feasibility of using recycled steel slag aggregate in hot mix asphalt	e00861
Tang, Zhijie / Gan, Youwei / Yu, Ting / Li, Chuangmin	Study on betel nut fiber enhancing water stability of asphalt mixture based on response surface method	e00870
Xiong, Guangqi / Wang, Chong / Zhou, Shuai / Zheng, Yalin	Study on dispersion uniformity and performance improvement of steel fibre reinforced lightweight aggregate concrete by vibrational mixing	e01093
Hou, Jiawen / Zhang, Tao / Liu, Zu’an / Hou, Chaoping / Fukuda, Hiroatsu	A study on influencing factors of optimum insulation thickness of exterior walls for rural traditional dwellings in northeast of Sichuan hills, China	e01033
Gan, Youwei / Li, Chuangmin / Ke, Wang / Deng, Qinhao / Yu, Ting	Study on pavement performance of steel slag asphalt mixture based on surface treatment	e01131
Cong, Xinyu / Qiu, Tairui / Xu, Jiquan / Liu, Xinqing / Wang, Liqing / Wang, Yongfeng / Chen, Changming / Zhao, Liting / Xing, Chao / Tan, Yiqiu	Study on the effectiveness of fibre reinforcement on the engineering performance of foamed concrete	e01015
Gao, Song / Guo, Jia / Gong, Yaoyao / Ban, Shunli / Liu, Ang	Study on the penetration and diffusion of chloride ions in interface transition zone of recycled concrete prepared by modified recycled coarse aggregates	e01034
Huang, Zhen / Sun, Huai-Yuan / Dai, Yi-Ming / Hou, Peng-Bo / Zhou, Wei-Zheng / Bian, Lin-Lin	A study on the shear strength and dry-wet cracking behaviour of waste fibre-reinforced expansive soil	e01142
Sayed, Ahmed M.	Studying the web notch shape effect on shear load: Numerical analysis for steel beams	e01116
Bakhshizadeh, Amin / Khayat, Navid / Horpibulsuk, Suksun	Surface stabilization of clay using sodium alginate	e01006
Hamada, Hussein / Alattar, Alyaa / Tayeh, Bassam / Yahaya, Fadzil / Adesina, Adeyemi	Sustainable application of coal bottom ash as fine aggregates in concrete: A comprehensive review	e01109
Ashiq, Syed Zishan / Akbar, Aziz / Farooq, Khalid / Mujtaba, Hassan	Sustainable improvement in engineering behavior of Siwalik Clay using industrial waste glass powder as additive	e00883
Wang, Tianchun / San Nicolas, Rackel / Kashani, Alireza / Ngo, Tuan	Sustainable utilisation of low-grade and contaminated waste glass fines as a partial sand replacement in structural concrete	e00794
Qaidi, Shaker M. A. / Tayeh, Bassam A. / Isleem, Haytham F. / de Azevedo, Afonso R. G. / Ahmed, Hemn Unis / Emad, Wael	Sustainable utilization of red mud waste (bauxite residue) and slag for the production of geopolymer composites: A review	e00994
Hejazian, Shayeste / Ahmadyari-Sharamin, Mehdi	Synergistic effect of Arabic and guar gums on corrosion behavior of steel reinforced concrete in a simulator environment	e01024
Wang, Peng / Xu, Jing / Li, Jianxin / Yu, Lie	Tensile behavior of cruciform stubs with staggered bolt patterns	e01138
Kim, Yail J. / Jung, Woo-Tai / Kang, Jae-Yoon / Park, Jong-Sup	Testing methods and design specifications for CFRP-prestressed concrete members: A review of current practices and case studies	e00842
Xie, Xudong / Zhang, Wenquan / Luan, Xuezhen / Gao, Weijun / Geng, Xiaoyu / Xue, Ying	Thermal performance enhancement of hollow brick by agricultural wastes	e01047
Gülen, Şemsi Melih / Çöpoğlu, Nurullah / Yılmaz, Yasin Bozkurt / Karaahmet, Oğuz / Cengiz, Tamer / Gökdemir, Hatice / Cicek, Bugra	TiO2-based glass-ceramic coatings: An innovative approach to architectural panel applications	e00805
de-Prado-Gil, Jesús / Palencia, Covadonga / Silva-Monteiro, Neemias / Martínez-García, Rebeca	To predict the compressive strength of self compacting concrete with recycled aggregates utilizing ensemble machine learning models	e01046
Lei, Yue / Li, Kun / Dou, Mei / Liu, Lianhua / Feng, Ya / Feng, Chi	Towards optimized pore structure to balance the thermal-mechanical performance of foamed ceramic	e01072
Liang, Xingmin / Yu, Xin / Chen, Chen / Ding, Gongying / Huang, Jiandong	Towards the low-energy usage of high viscosity asphalt in porous asphalt pavements: A case study of warm-mix asphalt additives	e00914
Zeyad, Abdullah M. / Megat Johari, Megat Azmi / Abadel, Aref / Abutaleb, Ahmed / Mijarsh, M. J. A. / Almalki, Ali	Transport properties of palm oil fuel ash-based high-performance green concrete subjected to steam curing regimes	e01077
Amran, Mugahed / Onaizi, Ali M. / Fediuk, Roman / Danish, Aamar / Vatin, Nikolai Ivanovich / Murali, Gunasekaran / Abdelgader, Hakim S. / Mosaberpanah, Mohammad Ali / Cecchin, Daiane / Azevedo, Afonso	An ultra-lightweight cellular concrete for geotechnical applications – A review	e01096
Cafiso, Salvatore / Di Graziano, Alessandro / Marchetta, Valeria / Pappalardo, Giuseppina	Urban road pavements monitoring and assessment using bike and e-scooter as probe vehicles	e00889
Said, Asmaa / Elsayed, Mahmoud / El-Azim, Ahmed Abd / Althoey, Fadi / Tayeh, Bassam A.	Using ultra-high performance fiber reinforced concrete in improvement shear strength of reinforced concrete beams	e01009
Reiterman, Pavel / Mondschein, Petr / Doušová, Barbora / Davidová, Vendula / Keppert, Martin	Utilization of concrete slurry waste for soil stabilization	e00900
Assiamah, Sampson / Agyeman, Stephen / Adinkrah-Appiah, Kwadwo / Danso, Humphrey	Utilization of Sawdust Ash as Cement Replacement for Landcrete Interlocking Blocks Production and Mortarless Construction	e00945
He, Songsong / Jiao, Chujie / Niu, Yanfei / Li, Song	Utilizing of coral/sea sand as aggregates in environment-friendly marine mortar: Physical properties, carbonation resistance and microstructure	e00981
Lee, Ming-Gin / Lo, Shang-Lien / Kan, Yu-Cheng / Chiang, Chih-Hung / Chang, Jih-Hsing / Yu-Min, Su / Yatsenko, E. A. / Hu, Shih-Hsin	Water quenched slag from incinerator ash used as artificial stone	e00827
Kanthasamy, Elilarasi / Chandramohan, Dinesh Lakshmanan / Shanmuganathan, Gunalan / Poologanathan, Keerthan / Gatheeshgar, Perampalam / Corradi, Marco / McIntosh, Alex	Web crippling behaviour of cold-formed high-strength steel unlipped channel beams under End-One-Flange load case	e01022

Über diese
Datenseite
IssueID
60021
Veröffentlicht am:
30.11.2021
Geändert am:
09.05.2022

Anzeige

Structurae kooperiert mit

International Association for Bridge and Structural Engineering (IABSE)

Anzeige

Case Studies in Construction Materials - Juni 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Case Studies in Construction Materials - Juni 2022

Artikel in dieser Ausgabe

Sie haben Ihr monatliches Download-Limit überschritten! Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen. Structurae Pro-Nutzer·innen sind auf 50 beschränkt.

Pflichtangaben

Sie haben Ihr monatliches Download-Limit überschritten!

Structurae Plus-Abonnent·innen können 30 Medien bzw. Datensätze pro Monat herunterladen.
Structurae Pro-Nutzer·innen sind auf 50 beschränkt.