0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Workability of Nanomodified Self-Compacting Geopolymer Concrete Based on Response Surface Method

Autor(en):


ORCID
Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Buildings, , n. 11, v. 14
Seite(n): 3610
DOI: 10.3390/buildings14113610
Abstrakt:

Geopolymer concrete is more low-carbon and environmentally friendly than Portland cement concrete. Nanoparticle modification can help to improve the mechanical and durability performance of concrete, but due to its large specific surface area and high activity, it may deteriorate its workability. However, there is currently limited research on the effect of nanomodification on the workability of freshly mixed self-compacting geopolymer concrete (SCGC). This article conducted SCGC workability experiments using the response surface methodology, which included 29 different mixtures. The effects of nano-silica (NS), nano-calcium carbonate (NC), alkali content (N/B), and water cement ratio (W/B) on the workability of SCGC were studied. The experimental results show that the addition of NS and NC can reduce the slump expansion of SCGC, and the combination of the two significantly increases the amplitude of slump expansion with the change in nanomaterial content. An increase in N/B will reduce the expansion time and clearance value of SCGC. As N/B increases from 4% to 4.4%, the slump extension of SCGC decreases, and with a further increase in N/B, the slump extension increases significantly to 68.1 cm, which means that the slump extension of SCGC increases by 9.5% as N/B increases from 4.4 to 5. This study can provide a reference for optimizing the fresh performance of geopolymer concrete and improving the mechanism of nanomaterial-modified geopolymer concrete.

Copyright: © 2024 by the authors; licensee MDPI, Basel, Switzerland.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10810228
  • Veröffentlicht am:
    17.01.2025
  • Geändert am:
    25.01.2025
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine