0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Three-Dimensional Reconstruction of Tunnel Face Based on Multiple Images

Autor(en):
ORCID
ORCID

Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2021
Seite(n): 1-11
DOI: 10.1155/2021/8837309
Abstrakt:

The current geological sketch in tunnel engineering is mainly based on sketches of workers. However, geological sketch drawn by workers always offers fundamental data purely due to its drawing mode. A novel drawing method for geological sketch has been introduced using multiview photos in this process. The images of tunnel faces are taken from multiple angles, and every two pictures have overlaps. By measuring the distance between the camera and the tunnel face using a laser range finder, the photographic scale of each photo can be confirmed. SpeededUp Robust Features (SURF) is a good practice for detecting feature points, and the sparse point cloud is reconstructed from multiview photos by structure from motion (SFM). However, the sparse point cloud is not suitable for analysis for structural planes due to its sparsity. Therefore, patch-based multiview stereo (PMVS) is used to reconstruct dense point cloud from the sparse point cloud. After 3D reconstruction, the details of the tunnel face are recorded. The proposed technique was applied to multiview photos acquired in the Xiaosanxia railway tunnel and Fengjie tunnel in Chongqing, China. In order to record the geological conditions of the tunnel face quickly and accurately, Chengdu Tianyou Tunnelkey has developed a set of software and hardware integration system called CameraPad. Besides, CameraPad was used to collect the multiview photos of the tunnel face in the No. 1 Xinan railway tunnel in Jilin, China. By comparing with traditional and existing methods, the proposed method offers a more reductive model for geological conditions of the tunnel face.

Copyright: © Wenge Qiu et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10604192
  • Veröffentlicht am:
    26.04.2021
  • Geändert am:
    02.06.2021
 
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine