Study on the Mathematical Model and Propagation Characteristics of AE Waveform Signals during Rock Fracture

Rock deformation or fracture is accompanied by the phenomenon of acoustic emission (AE). Due to the heterogeneity and anisotropy of rock materials as well as the complexity of their fracture, AE signals recorded by sensors at different positions have different characteristics. To explore factors influencing these differences, this study examines the effects of the physical properties of rocks, such as heterogeneity, anisotropy, and viscosity, on AE waveform signals from the perspective of the rock material and its fracture characteristics as well as the characteristics of the propagation of different AE waveform signals. The results show that the frequency (f) of the AE signals generated by rock fracture is inversely proportional to crack length © and directly proportional to the rate of crack growth (v). During signal propagation, the comprehensive effects of such factors as the heterogeneity, anisotropy, and viscosity of rocks as well as environmental noise weaken the energy of the signals and enhance the distribution of signal frequency. Each factor differently influences the time frequency of AE. A model for the propagation of AE signals was built and verified. Finally, as for on-site rock mass engineering, the low-frequency signals should be analysed prior to analysis in rock mass disaster monitoring.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.