Rotational Restraint to Purlins Provided by Standing Seam Roof Systems

The finite element model used for analyzing the rotational restraint rigidity of standing seam roof systems was developed. The influences of different factors on the rotational restraint rigidity provided by two types of standing seam roof systems were studied. The variables include local deformation of standing seam roof panels, panel thickness, clip tab thickness, and the relative sliding of clip tab and clip base. The restraint mechanism of standing seam roof systems to the purlins was studied. It is shown that the rotational restraint rigidity provided by the two types of researching standing seam roof systems mainly depends on the slide tab thickness and the roof panel thickness. Finally, formulae for calculating rotational restraint rigidity of the LSIII and SS360 standing seam roof systems were also proposed based on parametric analysis results.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.