Research on Axial Stress and Strain Characteristics of Reinforced-Concrete Curved Pipe Jacking in Power Tunnels

Joint deflection during curved pipe jacking in power tunnels poses a significant risk of structural failure due to the resulting eccentric and diagonal loading on the pipes. This study investigated the axial stress and strain characteristics of reinforced-concrete pipes under varying joint deflection angles and jacking forces, using a combined approach of experimental model testing and finite element method (FEM) numerical simulations. The experimental setup replicated curved pipe jacking conditions, allowing for the measurement of strains and deformation under controlled loading. Numerical simulations, validated against experimental data, provided detailed insights into the stress distribution patterns. The results revealed distinct stress states in different pipe sections. The pipe closest to the jacking force (3# pipe) experienced eccentric loading, leading to localized stress concentrations and inelastic strain on the inner wall at the point of eccentricity, indicating vulnerability to compressive failure. The middle pipe section (2# pipe) underwent complex diagonal loading, resulting in the development of inelastic strain on both the inner and outer walls at specific orientations, highlighting a risk of both compressive and shear failure modes. The study also demonstrated that the magnitude of the axial jacking force and the degree of joint deflection significantly influence the stress distribution and the extent of inelastic strain. These findings provide important information for optimizing the design and construction of curved pipe jacking projects in power tunnels. The identified failure mechanisms and the influence of key parameters on pipe behavior can inform strategies to mitigate the risk of structural failure, improve the resilience of pipe systems, and enhance the overall safety and reliability of underground power tunnel infrastructure.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.