Xi Li 
- (2024): Correlation analysis of hot-mix asphalt and dense fine aggregate matrix properties under varying freeze-thaw cycles. In: Construction and Building Materials, v. 450 (November 2024).
- (2024): Experimental study and theoretical prediction of axial compression behavior in PMC-reinforced CFST columns with void defects. In: Engineering Structures, v. 313 (August 2024).
- (2024): The Evolution and Future Directions of Green Buildings Research: A Scientometric Analysis. In: Buildings, v. 14, n. 2 (1 Februar 2024).
- (2023): Experimental evaluation of mechanical properties and microstructure for recycled aggregate concrete collaboratively modified with nano-silica and mixed fibers. In: Construction and Building Materials, v. 403 (November 2023).
- (2024): Assessment of fabric characteristics with the development of sand liquefaction in cyclic triaxial tests: A DEM study. In: Soil Dynamics and Earthquake Engineering, v. 176 (Januar 2024).
- (2023): Experimental study on seismic responses of a curved bridge considering the effect of pulse and pulse duration. In: Structures, v. 58 (Dezember 2023).
- (2023): Experimental Study and Finite Element Analysis on the Modification of Fast-Hardening Polymer Cement Composite Material Applied to the Anchorage Zone of Expansion Joint. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2024): A New Index for Estimating the Improved Depth of Dynamic Compaction. In: International Journal of Geomechanics, v. 24, n. 3 (März 2024).
- (2023): Experimental study on the plastic hinge region of precast segmental bridge piers strengthened by CFRP. In: Structures, v. 55 (September 2023).
- (2023): Experimental Study on Seismic Performance of CFRP-Strengthened Recycled Concrete Columns with Different Levels of Seismic Damage. In: Buildings, v. 13, n. 6 (23 Mai 2023).
- (2023): Evaluation of sound environment in departure lounges of a large hub airport. In: Building and Environment, v. 232 (März 2023).
- (2018): A New Method on Characterizing Particle Crushing State and Strength Revolution of Geotechnical Materials Based on Linear Fitting. In: International Journal of Structural and Civil Engineering Research, v. 7, n. 1 ( 2018).
- (2023): Failure analysis and experimental study on bolted composite joints based on continuum damage mechanics. In: Composite Structures, v. 303 (Januar 2023).
- (2021): Evaluation of different modulus input on the mechanical responses of asphalt pavement based on field measurements. In: Construction and Building Materials, v. 312 (Dezember 2021).
- (2021): Measuring the spatial quality of bedrooms in nursing homes with visual environmental performance. In: Frontiers of Architectural Research, v. 10, n. 2 (Juni 2021).
- (2021): Experimental study on the cyclic behavior of reinforced concrete bridge piers with non-uniform corrosion. In: Structures, v. 33 (Oktober 2021).
- (2020): New Method to Evaluate Strengthen Efficiency by Dynamic Compaction. In: International Journal of Geomechanics, v. 20, n. 4 (April 2020).
- (2019): Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact. In: Composite Structures, v. 207 (Januar 2019).
- (2020): Efficient seismic reliability analysis of non-linear structures under non-stationary ground motions. In: Soil Dynamics and Earthquake Engineering, v. 139 (Dezember 2020).
- (2020): Effect of ECC jackets for enhancing the lateral cyclic behavior of RC bridge columns. In: Engineering Structures, v. 219 (September 2020).
- (2020): Dynamic properties of a steel–UHPC composite deck with large U-ribs: Experimental measurement and numerical analysis. In: Engineering Structures, v. 213 (Juni 2020).
- (2019): Extreme value distribution and dynamic reliability estimation of high-pier bridges subjected to near-fault impulsive ground motions. In: Advances in Structural Engineering, v. 23, n. 7 (Dezember 2019).
- (2016): Configuration Analysis of Two-Dimensional Resection Networks. In: Journal of Surveying Engineering (ASCE), v. 142, n. 4 (November 2016).
- (2019): Finite element simulations of unequal-depth panel zones in steel beam-to-tubular column joints. In: Journal of Constructional Steel Research, v. 163 (Dezember 2019).
- (2019): The field-dependent surface roughness of magnetorheological elastomer: Numerical simulation and experimental verification. In: Smart Materials and Structures, v. 28, n. 8 (August 2019).
- (2018): Numerical evaluation on shear behavior of irregular steel beam-to-CFST column connections. In: Journal of Constructional Steel Research, v. 148 (September 2018).
- (2019): Integrating Finite Element Modeling with Sensing System for Monitoring Composite Structures Using the Method of Neutral Axis. In: Structural Engineering International, v. 29, n. 1 (Januar 2019).
- (2018): Numerical Study of the Dynamic Compaction Process considering the Phenomenon of Particle Breakage. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2014): Effects of model updating on the estimation of stochastic seismic response of a concrete-filled steel tubular arch bridge. In: Structure and Infrastructure Engineering, v. 10, n. 12 (Oktober 2014).
- (2017): Evaluating early-age shrinkage effects in steel concrete composite beam-like structures. In: Steel Construction, v. 10, n. 1 (Januar 2017).
Structurae kooperiert mit
