Predicting Residual Flexural Strength of Corroded Prestressed Concrete Beams: Comparison of Chinese Code, Eurocode and ACI Standard

In the present study, 104 sets of flexural tests on corroded prestressed concrete (CPC) beams were gathered from different publications. A flexural strength database for CPC beams was created by incorporating standardized concrete strength and the corrosion rate of prestressed steel. This database enables the analysis of the impact of different factors on the flexural capacity, such as the beam’s width and effective depth, concrete compressive strength, shear span ratio, the prestressed steel’s corrosion level, prestressing ratio (PPR), and the effective prestress. The findings show that the flexural strength of the CPC beams is notably influenced by variations in beam width, shear span ratio, and the prestressed steel’s corrosion level and prestressing ratio compared to other parameters. Furthermore, a comparison was conducted of the Chinese code, Eurocode and ACI standard for evaluating the flexural strength of CPC beams using the established database. It shows that the three design codes overestimate the flexural strength of CPC beams, and it is unsafe to predict flexural strength using these three codes without taking into account the impact of corrosion. Finally, a practical model based on the ACI standard is suggested to provide precise and reliable predictions across a diverse set of test data.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.