Modeling Dynamic Frequency Response on Slab Track of Shinkansen Railway Based on Finite Element Method

The use of slab tracks in lieu of ballast tracks has introduced new dimensions in track dynamics in high-speed railways. To improve the performance of slab tracks under dynamic frequency responses caused by loads on the Shinkansen railway, the present study aimed to investigate the effect of mechanical properties of track components, including the elasticity modulus and thickness on the resonance frequency of the vertical dynamic responses using the finite element method. Such responses included receptance and decay rate in the asphalt bearing layer (ABL), hydraulically bonded layer (HBL), and concrete bearing layer (CBL). In addition, the study sought to select the optimal layer as an effective layer in the view of reducing the resonance frequency of dynamic responses in comparison with the general model. Based on the data regarding the effects of elasticity modulus and thickness of slab track layers on the resonance of the dynamic frequency responses under the amplitude loads, by changing the load from 20 to 25 tons over the slab track, the receptance under the modulus and thickness change increased up to 34 and 29%. Moreover, the decay rate under the modulus and thickness change increased up to 31 and 37%. Accordingly, by increasing the load amplitude, the CBL and HBL showed lower dynamic responses than other layers. Thus, CBL and HBL were selected as the optimum layers for improving the performance of the slab track of the Shinkansen railway.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.