^ Investigation on the Effects of Prefabricated Crack and Strain Rate on Uniaxial Compressive Properties of Frozen Silty Soil | Structurae
0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Investigation on the Effects of Prefabricated Crack and Strain Rate on Uniaxial Compressive Properties of Frozen Silty Soil

Autor(en):


Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: Advances in Civil Engineering, , v. 2020
Seite(n): 1-11
DOI: 10.1155/2020/8813455
Abstrakt:

To investigate the uniaxial compressive strength and deformation properties of frozen silty soil with prefabricated crack under various strain rates, the static uniaxial compressive tests were conducted for frozen silty soil using three kinds of binder materials to select the suitable prefabricated crack manufacturing method. Afterward, the static and dynamic stress-strain curves of frozen silty soil with different prefabricated crack numbers were obtained based on static and splitting Hopkinson pressure bar (SHPB) tests. In addition, the high-speed camera was employed to record the fracturing process of frozen silty soil under impact loads. Results indicated that the frozen silty soil specimens with no binder showed higher static strength compared with other two binder materials (plaster and Vaseline). The strength growth rate of frozen silty soil showed three-stage (fast-slow-rapid) change characteristics. The peak strain of frozen silty soil under static loads scope was higher compared with that under dynamic loads, while its dynamic peak strain with various prefabricated crack numbers was remarkably rate-dependent. The absorbed energy density of frozen silty soil was subject to a negative (positive) relationship with the prefabricated crack numbers (strain rate). The dominated crack of intact frozen silty soil specimen finally presented Y-shaped shear failure. However, tensile cracks parallel to stress wave propagation direction were observed for the frozen silty soil specimen with prefabricated crack.

Copyright: © 2020 Dongdong Ma et al.
Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10427177
  • Veröffentlicht am:
    13.07.2020
  • Geändert am:
    02.06.2021