Investigation of Intermediate-Height Horizontal Brace Forces under Horizontal and Vertical Loads including Random Initial Imperfections

In engineering practice, longitudinal brace systems for column-braced systems are designed to resist both horizontal and vertical loads. In previous experimental research on horizontal brace forces for column-braced systems of intermediate height, only vertical loads were considered. Hence, this paper presents a numerical simulation of numerous column-braced systems subjected to horizontal and vertical loads. In the numerical simulation, second-order analysis was adopted, and the Monte Carlo method was used to incorporate the randomness of initial imperfections in the horizontal brace and column. From the finite element (FE) analyses and probability model statistics, the normal probability density equation for intermediate-height horizontal brace forces under horizontal and vertical loads was obtained, and the corresponding design intermediate-height horizontal brace forces were determined and compared with those under vertical loads only. The results indicate that the design intermediate-height horizontal brace forces under horizontal and vertical loads are significantly greater than those under only vertical loads, and that the design intermediate-height horizontal brace forces under horizontal and vertical loads are also greater than the simple superposition results of horizontal loads and intermediate-height horizontal brace forces under only vertical loads.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.