Fatigue Performance Evaluation of Warm-Mixed Rubber Asphalt Mixture for Stress Absorption Layer in Cold Area
Autor(en): |
Rui Pan
|
---|---|
Medium: | Fachartikel |
Sprache(n): | Englisch |
Veröffentlicht in: | Buildings, 18 Dezember 2024, n. 12, v. 14 |
Seite(n): | 3817 |
DOI: | 10.3390/buildings14123817 |
Abstrakt: |
Based on the composition design of warm-mixed rubber asphalt mixture and the analysis of the influence of warm mixing on the road performance of warm-mixed rubber asphalt mixture, the fatigue performance of warm-mixed rubber asphalt mixture is studied in this paper. The effects of gradation, asphalt dosage, and strain level on the fatigue life of the mixture are analyzed. Based on a comparative analysis of the fatigue life of warm-mixed and hot-mixed rubber asphalt mixture before aging, it is concluded that the fatigue performance of hot-mixed rubber asphalt mixture is slightly better than that of warm-mixed rubber asphalt mixture. The effect of aging on the fatigue performance of warm-mixed and hot-mixed rubber asphalt mixture is analyzed, and it is concluded that the fatigue durability of aging hot-mixed rubber asphalt mixture decreases much faster than that of warm-mixed rubber asphalt mixture. Based on a comparative analysis of the fatigue performance of three kinds of asphalt mixture used as a stress absorption layer, it is concluded that the fatigue performance of warm-mixed rubber asphalt mixture is basically the same as that of hot-mixed rubber asphalt mixture, but much higher than that of SBS-modified asphalt mixture. A warm-mixed agent can slow down the decreasing rate of fatigue performance of rubber asphalt mixture and improve the aging resistance of rubber asphalt mixture. |
Copyright: | © 2024 by the authors; licensee MDPI, Basel, Switzerland. |
Lizenz: | Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden. |
3.5 MB
- Über diese
Datenseite - Reference-ID
10810237 - Veröffentlicht am:
17.01.2025 - Geändert am:
25.01.2025