^ Effect of temperature on early-age properties of self-consolidating concrete equivalent mortar | Structurae
0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Effect of temperature on early-age properties of self-consolidating concrete equivalent mortar

Autor(en):



Medium: Fachartikel
Sprache(n): Englisch
Veröffentlicht in: RILEM Technical Letters, , v. 5
Seite(n): 114-122
DOI: 10.21809/rilemtechlett.2020.105
Abstrakt:

In this study, the effect of material temperature during casting on fresh properties, hydration kinetics, and early-age compressive strength of self-consolidating concrete (SCC) was evaluated. Concrete equivalent mortars (CEMs) based on SCC mixture designs with water-to-binder ratios of 0.41 and 0.45 were investigated. The SCC mixtures are targeted for infrastructure and building construction and precast applications. The CEMs were prepared at temperatures ranging from 8 to 36°C.  Superplasticizer (SP) and air-entraining agent (AEA) demand were evaluated for the CEM mixtures made with different supplementary cementing material (SCM) and limestone filler types. Test results showed that the ambient temperature can significantly affect the SP and AEA demand, hydration kinetics, and compressive strength after 1 d of age. According to the ultraviolet–visible spectrophotometry (UV/Vis) test, the absorption rate of polycarboxylate-based SP decreased with temperature. In contrast, the sensitivity of polynaphthalene sulfonate-based SP to temperature was minimal. Relationships between the variations of different admixture contents, heat flux, and compressive strength with temperature were developed. For a constant slump flow and air content, the demand of the SP and AEA, heat flux, and 1-d compressive strength of CEMs increased linearly with material temperature.

Lizenz:

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.

  • Über diese
    Datenseite
  • Reference-ID
    10535353
  • Veröffentlicht am:
    01.01.2021
  • Geändert am:
    02.06.2021