Direct Strength Design of Circular Cylindrical Steel Shells under Uniform External Pressure

Based on a systematic literature review, no design guidelines addressing practical issues related to steel circular hollow section (CHS) members under hydrostatic pressure have been documented thus far, except for the design recommendations proposed by the European standard EN 1993-1-6 concerning the strength and stability of shell structures. Considering that the existing codes are often outdated and subject to improvement, there is a growing demand for modern solutions that can accurately replicate the stability loss response of equipment subject to external pressure. The development of a more direct and simple method, augmented by reliable computational techniques, is advisable to avoid the numerous challenges associated with manual calculations. This approach will streamline the design process and mitigate the complexity of current practical or technical approaches. Thus, this research has formulated a method to predict design strength through the direct application of the critical elastic buckling stress, determined from Generalised Beam Theory (GBT) analyses, induced by hydrostatic pressure in custom-crafted equations, finely tuned for this specific objective. The authors present a formulation of GBT to analyze the elastic buckling behavior of CHS subject to both combined axial compression and external pressure. This work provides an extensive study of the behavior of circular cylindrical shells under external loading conditions. It first introduces the analyses of GBT and the theoretical and empirical formulas applicable to this objective. It then describes the steps involved in the development and validation of a numerical model that simulates the response of circular cylindrical shells under hydrostatic pressure, conducting an extensive parametric study using finite element analyses (FEAs). The results from available tests validate the finite element (FE) model. Upon achieving adequate agreement between the generated numerical and experimental results, new resistance reduction curves for cylindrical shell members are developed based on the results of the parametric study. Additionally, the study compares the existing provisions of EN 1993-1-6 for the design of cylindrical shells under hydrostatic pressure. Finally, a statistical approach is adopted to compare the responses of cylindrical shells calculated according to the EN 1993-1-6 code recommendations with those obtained through the newly proposed method.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.