0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Dinar Camotim ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Bicelli, Antonio / Landesmann, Alexandre / Camotim, Dinar / Dinis, Pedro (2021): DSM Design of Cold‐Formed Steel Columns Failing in Flexural‐Torsional Modes at Elevated Temperatures. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1421

  2. Behzadi‐Sofiani, Behnam / Gardner, Leroy / Wadee, M. Ahmer / Dinis, Pedro B. / Camotim, Dinar (2021): Behaviour and design of fixed‐ended steel equal‐leg angle section columns. In: ce/papers, v. 4, n. 2-4 (September 2021).

    https://doi.org/10.1002/cepa.1400

  3. Behzadi-Sofiani, Behnam / Gardner, Leroy / Wadee, M. Ahmer / Dinis, Pedro B. / Camotim, Dinar (2021): Behaviour and design of fixed-ended steel equal-leg angle section columns. In: Journal of Constructional Steel Research, v. 182 (Juli 2021).

    https://doi.org/10.1016/j.jcsr.2021.106649

  4. Barichello, Carolina / Landesmann, Alexandre / Camotim, Dinar (2017): Distortional Failure and DSM Design of Cold-Formed Steel S-Shaped Beams Under Uniform Bending. In: Latin American Journal of Solids and Structures, v. 14, n. 12 (Dezember 2017).

    https://doi.org/10.1590/1679-78253616

  5. Camotim, Dinar / Dinis, Pedro Borges / Landesmann, Alexandre (2020): Behavior, Failure, and Direct Strength Method Design of Steel Angle Columns: Geometrical Simplicity versus Structural Complexity. In: Journal of Structural Engineering (ASCE), v. 146, n. 11 (November 2020).

    https://doi.org/10.1061/(asce)st.1943-541x.0002742

  6. Camotim, Dinar / Dinis, Pedro B. (2011): Coupled instabilities with distortional buckling in cold-formed steel lipped channel columns. In: Thin-Walled Structures, v. 49, n. 5 (Mai 2011).

    https://doi.org/10.1016/j.tws.2010.09.003

  7. dos Santos, Eliane S. / Batista, Eduardo M. / Camotim, Dinar (2012): Experimental investigation concerning lipped channel columns undergoing local–distortional–global buckling mode interaction. In: Thin-Walled Structures, v. 54 (Mai 2012).

    https://doi.org/10.1016/j.tws.2012.02.004

  8. Gonçalves, Rodrigo / Camotim, Dinar (2013): Elastic buckling of uniformly compressed thin-walled regular polygonal tubes. In: Thin-Walled Structures, v. 71 (Oktober 2013).

    https://doi.org/10.1016/j.tws.2013.04.016

  9. Bebiano, Rui / Camotim, Dinar / Silvestre, Nuno (2013): Dynamic analysis of thin-walled members using Generalised Beam Theory (GBT). In: Thin-Walled Structures, v. 72 (November 2013).

    https://doi.org/10.1016/j.tws.2013.07.004

  10. Gonçalves, Rodrigo / Camotim, Dinar (2013): Buckling behaviour of thin-walled regular polygonal tubes subjected to bending or torsion. In: Thin-Walled Structures, v. 73 (Dezember 2013).

    https://doi.org/10.1016/j.tws.2013.08.006

  11. Garcea, Giovanni / Gonçalves, Rodrigo / Bilotta, Antonio / Manta, David / Bebiano, Rui / Leonetti, Leonardo / Magisano, Domenico / Camotim, Dinar (2016): Deformation modes of thin-walled members: A comparison between the method of Generalized Eigenvectors and Generalized Beam Theory. In: Thin-Walled Structures, v. 100 (März 2016).

    https://doi.org/10.1016/j.tws.2015.11.013

  12. Dinis, Pedro Borges / Camotim, Dinar / Landesmann, Alexandre (2019): Design of simply supported hot‐rolled steelshort‐to‐intermediate angle columns. Design approach based on the direct strength method (DSM). In: Steel Construction, v. 12, n. 4 (November 2019).

    https://doi.org/10.1002/stco.201900029

  13. Martins, André Dias / Camotim, Dinar / Gonçalves, Rodrigo / Dinis, Pedro Borges (2018): Enhanced Geometrically Nonlinear Generalized Beam Theory Formulation: Derivation, Numerical Implementation, and Illustration. In: Journal of Engineering Mechanics (ASCE), v. 144, n. 6 (Juni 2018).

    https://doi.org/10.1061/(asce)em.1943-7889.0001457

  14. Rasheed, Hayder A. / Camotim, Dinar (2005): Advances in the Stability of Frame Structures. In: Journal of Engineering Mechanics (ASCE), v. 131, n. 6 (Juni 2005).

    https://doi.org/10.1061/(asce)0733-9399(2005)131:6(557)

  15. Basaglia, Cilmar / Camotim, Dinar / Silvestre, Nuno (2015): Buckling and Vibration Analysis of Cold-Formed Steel CHS Members and Frames Using Generalized Beam Theory. In: International Journal of Structural Stability and Dynamics, v. 15, n. 8 (Oktober 2015).

    https://doi.org/10.1142/s0219455415400210

  16. Basaglia, Cilmar / Camotim, Dinar (2015): Buckling Analysis of Thin-Walled Steel Structural Systems Using Generalized Beam Theory (GBT). In: International Journal of Structural Stability and Dynamics, v. 15, n. 1 (Januar 2015).

    https://doi.org/10.1142/s0219455415400040

  17. Challamel, Noël / Andrade, Anísio / Camotim, Dinar (2007): An Analytical Study on the Lateral-torsional Buckling of Linearly Tapered Cantilever Strip Beams. In: International Journal of Structural Stability and Dynamics, v. 7, n. 3 (September 2007).

    https://doi.org/10.1142/s0219455407002368

  18. Landesmann, Alexandre / Camotim, Dinar / Silva, Fernanda C. M. (2019): DSM Design of Cold-Formed Steel Columns Failing in Distortional Modes at Elevated Temperatures. In: International Journal of Steel Structures, v. 19, n. 3 ( 2019).

    https://doi.org/10.1007/s13296-018-0184-x

  19. Silvestre, Nuno / Camotim, Dinar (2007): Elastic buckling and second-order behaviour of pitched-roof steel frames. In: Journal of Constructional Steel Research, v. 63, n. 6 (Juni 2007).

    https://doi.org/10.1016/j.jcsr.2006.08.003

  20. Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2017): Behaviour and DSM design of stiffened lipped channel columns undergoing local-distortional interaction. In: Journal of Constructional Steel Research, v. 128 (Januar 2017).

    https://doi.org/10.1016/j.jcsr.2016.07.030

  21. Camotim, Dinar / Dinis, Pedro B. (2013): Distortional–global interaction in lipped channel columns. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 166, n. 8 (September 2013).

    https://doi.org/10.1680/stbu.12.00054

  22. Young, Ben / Silvestre, Nuno / Camotim, Dinar (2013): Cold-Formed Steel Lipped Channel Columns Influenced by Local-Distortional Interaction: Strength and DSM Design. In: Journal of Structural Engineering (ASCE), v. 139, n. 6 (Juni 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000694

  23. Gonçalves, Rodrigo / Camotim, Dinar / Peres, Nuno (2018): Application of Generalised Beam Theory to curved members with circular axis. In: Stahlbau, v. 87, n. 4 (April 2018).

    https://doi.org/10.1002/stab.201810587

  24. Dinis, Pedro Borges / Camotim, Dinar / Vieira, Luís (2017): 13.11: DSM design approach for hot-rolled steel angle columns. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.434

  25. Martins, André Dias / Camotim, Dinar / Dinis, Pedro Borges (2017): 07.03: Distortional-global interaction in lipped channel beams: Part II: Strength, relevance and DSM design. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.193

  26. Martins, André Dias / Camotim, Dinar / Gonçalves, Rodrigo / Dinis, Pedro Borges (2017): 07.02: Distortional-global interaction in lipped channel beams: Part I: Mechanics and elastic behaviour. In: ce/papers, v. 1, n. 2-3 (September 2017).

    https://doi.org/10.1002/cepa.192

  27. Silvestre, Nuno / Dinis, Pedro B. / Camotim, Dinar (2013): Developments on the Design of Cold-Formed Steel Angles. In: Journal of Structural Engineering (ASCE), v. 139, n. 5 (Mai 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000670

  28. Basaglia, Cilmar / Camotim, Dinar (2013): Buckling, Postbuckling, Strength, and DSM Design of Cold-Formed Steel Continuous Lipped Channel Beams. In: Journal of Structural Engineering (ASCE), v. 139, n. 5 (Mai 2013).

    https://doi.org/10.1061/(asce)st.1943-541x.0000651

  29. Souza dos Santos, Eliane / de Miranda Batista, Eduardo / Camotim, Dinar (2014): Cold-formed steel columns under L-D-G interaction - Experimental investigation. In: Steel Construction, v. 7, n. 3 (August 2014).

    https://doi.org/10.1002/stco.201410034

  30. Camotim, Dinar / Basaglia, Cilmar (2013): Buckling analysis of thin-walled steel structures using generalized beam theory (GBT): state-of-the-art report. In: Steel Construction, v. 6, n. 2 (Juni 2013).

    https://doi.org/10.1002/stco.201310021

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae