Development of a Method to Study Evaporation of a Volatile Solvent in an Isolated Subsurface Structure: A Practical Exercise in Risk Minimization

This article describes development and confirmatory testing of a method to study the evaporation of a volatile solvent containing ignitable ingredients in an isolated subsurface structure, a type of confined space. Accidental spillage and surreptitious disposal of chemical products in streets create a risk of fire and explosions in these structures. Development of the method included consideration about instrument safety; personal exposure; volume of the structure (2.5 m³); evaporation rate; temperature of the airspace; and number of opening(s) in the manhole cover. Confirmatory testing utilized 10 mL of lacquer thinner (60% to 80% toluene, 10% to 20% methylethyl ketone (MEK), 5% to 10% methanol and 1% to 9% acetone) on a wetted paper towel positioned near the bottom of the structure. This methodology produced a maximum of 2150 ppm of ‘isobutylene units’ on a PID (PhotoIonization sensor) positioned about 15 cm above the sample. This concentration corresponds to about 1140 ppm of toluene (less than 10% of the Lower Flammable Limit of 12,700 ppm). This method offers a stable, safe platform for study of the process. Evaporation of solvent and exchange between the external atmosphere and the airspace regulate the concentration of vapor, which can typically persist for 24 to 48 h.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.