Bond Behavior between Concrete and Self-Expansion Polymer Material under Normal Pressures

Self-expansion polymer grouting technology is a new rapid trenchless method for repairing leakage and subsidence of underground concrete structures. The bond between polymer and concrete is critical to determine the ultimate conditions of repaired concrete. In this paper, a series of direct shear tests were performed to investigate the influence of normal pressure on the shear bond properties between self-expansion polymer and concrete with different polymer density and concrete strength. Results indicate that failure modes and bond strength are greatly influenced by the normal pressure for specimens with a lower polymer density. For a given normal pressure, the bond strength linearly increases with the increasing polymer density. As the polymer density increased up to 0.43 g/cm³, the increased ratio decreases with the polymer density. Moreover, the displacement at the peak point reduces with an increase in polymer density. Finally, a finite element model is proposed to evaluate the bond strength for specimen failure in concrete and verified with the test results.

Dieses Werk wurde unter der Creative-Commons-Lizenz Namensnennung 4.0 International (CC-BY 4.0) veröffentlicht und darf unter den Lizenzbedinungen vervielfältigt, verbreitet, öffentlich zugänglich gemacht, sowie abgewandelt und bearbeitet werden. Dabei muss der Urheber bzw. Rechteinhaber genannt und die Lizenzbedingungen eingehalten werden.