Xinxin Li 
- (2024): Durability of Recycled Concrete after Reinforcing the Aggregates with Permeable Crystalline Materials. In: Advances in Civil Engineering, v. 2024 (Januar 2024).
- (2024): Dynamic bond stress-slip relationship of steel reinforcing bars in concrete based on XGBoost algorithm. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2023): Experimental study with DIC technique on the bond failure of structural concrete under repeated reversed loading with different amplitude. In: Advances in Structural Engineering, v. 26, n. 16 (Oktober 2023).
- (2023): The impact of urban morphology on the building energy consumption and solar energy generation potential of university dormitory blocks. In: Sustainable Cities and Society, v. 96 (September 2023).
- (2023): Study on the failure mechanism between polyurethane grouting material and concrete considering the effect of moisture by digital image correlation. In: Journal of Building Engineering, v. 67 (Mai 2023).
- (2023): Reversed bond-slip model of deformed bar embedded in concrete based on ensemble learning algorithm. In: Journal of Building Engineering, v. 68 (Juni 2023).
- (2023): Cyclic bond deterioration of deformed steel bar in well-confined concrete. In: Construction and Building Materials, v. 372 (April 2023).
- (2023): Generalized cyclic bond-slip model of rebar embedded in concrete under lateral pressure: Parameter calibration and numerical implementation. In: Structures, v. 49 (März 2023).
- (2022): Compressive mechanical properties of self-expanding grouting materials with different densities. In: Construction and Building Materials, v. 332 (Mai 2022).
- (2022): Multi-objective optimization design for rural houses in western zones of China. In: Architectural Science Review, v. 65, n. 4 (Mai 2022).
- (2021): Bond Behavior between Concrete and Self-Expansion Polymer Material under Normal Pressures. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Research on the Infrared Thermographic Detection of Concrete under Solar Heating. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Interfacial bond performance between self-expansion polymer and concrete. In: Construction and Building Materials, v. 270 (Februar 2021).
- (2019): Modeling the effects of microcracks on water permeability of concrete using 3D discrete crack network. In: Composite Structures, v. 210 (Februar 2019).
- (2020): Active and passive source Rayleigh wave joint imaging of the shallow structure in the Caotan Camp area, southwestern Ordos Basin. In: Soil Dynamics and Earthquake Engineering, v. 130 (März 2020).
- (2017): An evaluation of the lighting environment in the public space of shopping centres. In: Building and Environment, v. 115 (April 2017).
- (2019): Flexible adhesion control by modulating backing stiffness based on jamming of granular materials. In: Smart Materials and Structures, v. 28, n. 11 (3 Oktober 2019).
- (2019): Microstructure-Based Modeling for Water Permeability of Hydrating Cement Paste. In: Journal of Advanced Concrete Technology, v. 17, n. 7 (Juli 2019).
- (2017): Modeling the three-dimensional unsaturated water transport in concrete at the mesoscale. In: Computers & Structures, v. 190 (1 Oktober 2017).
- (2015): Effect of loading rate on the bond behavior of plain round bars in concrete under lateral pressure. In: Construction and Building Materials, v. 94 (September 2015).
- (2016): An experimental and numerical study on water permeability of concrete. In: Construction and Building Materials, v. 105 (Februar 2016).
- (2016): Computational homogenization of effective permeability in three-phase mesoscale concrete. In: Construction and Building Materials, v. 121 (September 2016).
- (2017): Self-restraint thermal stress in early-age concrete samples and its evaluation. In: Construction and Building Materials, v. 134 (März 2017).
- (2017): Laboratory evaluation of the effect of composite modifier on the performance of asphalt concrete mixture. In: Construction and Building Materials, v. 155 (November 2017).
- (2016): Effect of loading rate on the bond behaviour of deformed steel bars in concrete subjected to lateral pressure. In: Materials and Structures, v. 49, n. 6 (Juni 2016).
- (2018): Hysteretic Bond Stress-Slip Response of Deformed Bars in Concrete under Uniaxial Lateral Pressure. In: Journal of Structural Engineering (ASCE), v. 144, n. 6 (Juni 2018).
- (2016): Effect of Loading Rate on Bond Behavior of Deformed Reinforcing Bars in Concrete under Biaxial Lateral Pressures. In: Journal of Structural Engineering (ASCE), v. 142, n. 6 (Juni 2016).
- (2017): A high-efficiency self-powered wireless sensor node for monitoring concerning vibratory events. In: Smart Materials and Structures, v. 26, n. 9 (September 2017).
- (2011): Bi-stable frequency up-conversion piezoelectric energy harvester driven by non-contact magnetic repulsion. In: Smart Materials and Structures, v. 20, n. 12 (Dezember 2011).
- (2018): Modeling Capillary Water Absorption in Concrete with Discrete Crack Network. In: Journal of Materials in Civil Engineering (ASCE), v. 30, n. 1 (Januar 2018).
Structurae kooperiert mit
