Qiang Yuan 
- (2024): Influences of cyclic air temperature and solar radiation on the long-term deterioration behaviour of double-block ballastless track. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Experimental investigation and soft bond modelling analysis on mechanical behaviours of foamed polyurethane solidified ballast. In: Construction and Building Materials, v. 440 (August 2024).
- (2024): Mechanism of concrete damage under the coupled action of freeze-thaw cycle and low-stress impact fatigue load：From pore structure to energy dissipation. In: Construction and Building Materials, v. 436 (Juli 2024).
- (2024): Investigation on deformation behavior and bearing capacity of a segmental ring based on the horizontal convergence. In: Structural Concrete, v. 25, n. 5 (Oktober 2024).
- (2024): Laboratory simulation on airborne chloride transport behaviors in cracked mortar under drying-wetting conditions. In: Journal of Building Engineering, v. 89 (Juli 2024).
- (2024): A micromechanical investigation of cement paste through a combination of the X-ray computed tomography and the phase field method. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2023): Improving the rheological behavior of alkali-activated slag pastes by using low surface free energy mineral admixtures. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Hardened properties and microstructure change of sulphoaluminate cement modified with different doses of styrene-butadiene rubber latex. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Microstructural characteristics of bonding interfacial transition zone of concrete and magnesium ammonium phosphate cement. In: Journal of Building Engineering, v. 76 (Oktober 2023).
- (2023): Insights into the efficiency loss of naphthalene superplasticizer in alkali-activated slag pastes. In: Journal of Building Engineering, v. 68 (Juni 2023).
- (2023): Mitigation effect of glass powder on external sulfate attack and its relation to alkalinity of pore solution. In: Construction and Building Materials, v. 370 (März 2023).
- (2022): The influence of alkali to aluminum ratio in pore solution on alkali-silica reaction and its correlation to aluminate phases. In: Construction and Building Materials, v. 356 (November 2022).
- (2022): Fresh and hardened properties of cement paste and mortar incorporating calcined cutter soil mixing residue. In: Construction and Building Materials, v. 357 (November 2022).
- (2022): Effects of water to binder ratio on the chloride binding behaviour of artificial seawater cement paste blended with metakaolin and silica fume. In: Construction and Building Materials, v. 353 (Oktober 2022).
- (2022): The internal temperature field of shotcrete in high geothermal tunnel and its effect on microstructures and mechanical properties. In: Construction and Building Materials, v. 335 (Juni 2022).
- (2021): Limited fractal behavior in cement paste upon mercury intrusion porosimetry test: Analysis and models. In: Construction and Building Materials, v. 276 (März 2021).
- (2022): Hydration, mechanical properties, and microstructural characteristics of cement pastes with different ionic polyacrylamides: A comparative study. In: Journal of Building Engineering, v. 56 (September 2022).
- (2022): Interaction between cement and asphalt emulsion and its influences on asphalt emulsion demulsification, cement hydration and rheology. In: Construction and Building Materials, v. 329 (April 2022).
- (2022): Improving the freeze-thaw resistance of mortar by a combined use of superabsorbent polymer and air entraining agent. In: Journal of Building Engineering, v. 52 (Juli 2022).
- (2021): Influence of pumping on the resistivity evolution of high-strength concrete and its relation to the rheology. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2015): Influence of superplasticizer on the rheology of fresh cement asphalt paste. In: Case Studies in Construction Materials, v. 3 (Dezember 2015).
- (2021): Longitudinal responses of shield tunnel subjected to surcharge considering the dislocation. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 174, n. 4 (August 2021).
- (2019): A feasible method for measuring the buildability of fresh 3D printing mortar. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Effects of rotational shearing on rheological behavior of fresh mortar with short glass fiber. In: Construction and Building Materials, v. 203 (April 2019).
- (2016): Integrated experimental measurement and computational analysis of relaxation behavior of cement and asphalt mortar. In: Construction and Building Materials, v. 120 (September 2016).
- (2017): Estimation of elastic modulus of cement asphalt binder with high content of asphalt. In: Construction and Building Materials, v. 133 (Februar 2017).
- (2017): Modeling compressive strength of cement asphalt composite based on pore size distribution. In: Construction and Building Materials, v. 150 (September 2017).
- (2017): Measuring the pore structure of cement asphalt mortar by nuclear magnetic resonance. In: Construction and Building Materials, v. 137 (April 2017).
- (2018): Modelling calcium leaching kinetics of cement asphalt paste. In: Materials and Structures, v. 51, n. 5 (Oktober 2018).
- (2018): Influences of shear-mixing rate and fly ash on rheological behavior of cement pastes under continuous mixing. In: Construction and Building Materials, v. 188 (November 2018).
Structurae kooperiert mit
