Yujie Yu 
- (2024): High-Cycle Fatigue Performance of the Heat-Affected Zone of Q370qENH Weathering Bridge Steel. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 4 (April 2024).
- (2024): Cyclic shear test and stiffness study of a cross-section-type shear connector connection. In: Journal of Constructional Steel Research, v. 212 (Januar 2024).
- (2024): Flexural behavior of PRCFST column-column connection with transfer sleeves. In: Engineering Structures, v. 301 (Februar 2024).
- (2024): Composite CFST column to H-shaped steel beam joint: Experimental and numerical investigation. In: Engineering Structures, v. 299 (Januar 2024).
- (2023): Improved Explicit Integration Algorithms with Controllable Numerical Damping for Real-Time Hybrid Simulation. In: Journal of Engineering Mechanics (ASCE), v. 149, n. 4 (April 2023).
- (2023): Dynamic responses and fatigue assessment of OSD in heavy-haul railway bridges. In: Journal of Constructional Steel Research, v. 204 (Mai 2023).
- (2022): Experimental seismic behaviors of different connections to CFST end-columns in shear walls. In: Journal of Constructional Steel Research, v. 196 (September 2022).
- (2022): Assessment of optimal ground motion intensity measure for high-speed railway girder bridge (HRGB) based on spectral acceleration. In: Engineering Structures, v. 252 (Februar 2022).
- (2022): A built-up type horizontally corrugated steel plate shear wall with a special shape. In: Engineering Structures, v. 250 (Januar 2022).
- (2021): Experimental and numerical studies on the fire-resistance behaviors of critical walls and columns in modular steel buildings. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Development and seismic performance of bolted steel dampers with X-shaped pipe halves. In: Engineering Structures, v. 239 (Juli 2021).
- (2021): Evaluation of the working mechanisms and simplified models of endplate-type inter-module connections. In: Structures, v. 32 (August 2021).
- (2020): Experimental study of a steel damper with X-shaped welded pipe halves. In: Journal of Constructional Steel Research, v. 170 (Juli 2020).
- (2020): Performance and optimum design of replaceable steel strips in an innovative metallic damper. In: Engineering Structures, v. 205 (Februar 2020).
- (2018): Experimental study on stress relaxation properties of structural cables. In: Construction and Building Materials, v. 175 (Juni 2018).
- (2016): Behavior of rectangular concrete-filled high-strength steel tubular columns with different aspect ratio. In: Thin-Walled Structures, v. 109 (Dezember 2016).
- (2019): Finite element modeling of cable sliding and its effect on dynamic response of cable-supported truss. In: Frontiers of Structural and Civil Engineering, v. 13, n. 5 (März 2019).
- (2019): Mechanical properties of hot-rolled and cold-formed steels after exposure to elevated temperature: A review. In: Construction and Building Materials, v. 213 (Juli 2019).
- (2015): Effect of column flange flexibility on WF-beam to rectangular CFT column connections. In: Journal of Constructional Steel Research, v. 106 (März 2015).
- (2015): Investigation and evaluation of a novel technique on CFRT column connection. In: Journal of Constructional Steel Research, v. 113 (Oktober 2015).
- (2017): Post-fire residual slip resistance and shear capacity of high-strength bolted connection. In: Journal of Constructional Steel Research, v. 138 (November 2017).
- (2019): Mechanical and seismic behaviors of bottom-flange-bolted upper-flange-welded through-diaphragm connections. In: Journal of Constructional Steel Research, v. 156 (Mai 2019).
- (2017): Experimental study of an innovative modular steel building connection. In: Journal of Constructional Steel Research, v. 139 (Dezember 2017).
- (2017): Numerical and experimental study on loaded suspendome subjected to sudden cable failure. In: Journal of Constructional Steel Research, v. 137 (Oktober 2017).
- (2014): Finite element study of behavior and interface force conditions of seven-wire strand under axial and lateral loading. In: Construction and Building Materials, v. 66 (September 2014).
- (2015): Experimental research on bending performance of structural cable. In: Construction and Building Materials, v. 96 (Oktober 2015).
- (2017): Evaluation on steel cyclic response to strength reducing heat treatment for seismic design application. In: Construction and Building Materials, v. 140 (Juni 2017).
- (2017): Effects of strength-weakening oriented heat treatment on structural steel and its application on steel plate shear walls. In: Construction and Building Materials, v. 151 (Oktober 2017).
- (2017): Advanced approaches to calculate recovery length and force redistribution in semi-parallel wire cables with broken wires. In: Engineering Structures, v. 131 (Januar 2017).
- (2017): Experimental study on interior connections in modular steel buildings. In: Engineering Structures, v. 147 (September 2017).
Structurae kooperiert mit
