- Tunnel measurements reveal significant reduction in traffic-related light-absorbing aerosol emissions in China. In: Science of The Total Environment, v. 856 (Januar 2023). (2023):
- Wide-range, Durable, and Adaptable Miniature Pressure Sensor Based on Planar Capacitance. In: Smart Materials and Structures, v. 33, n. 6 (Mai 2024). (2024):
- Study on properties of Portland cement-sulfoaluminate cement-based grouting materials modified by in-situ polymerization of calcium acrylate. In: Construction and Building Materials, v. 409 (Dezember 2023). (2023):
- Vibration characteristics of additive manufactured IWP-type TPMS lattice structures. In: Composite Structures, v. 327 (Januar 2024). (2024):
- Research on mechanical property of glued timber truss connected by steel plates and bolts. In: Structures, v. 57 (November 2023). (2023):
- Ultrasonic detection methods for mechanical characterization and damage diagnosis of advanced composite materials: A review. In: Composite Structures, v. 324 (November 2023). (2023):
- Static and multi-impact performances of RC beams strengthened with large rupture-strain FRP composites. In: Composite Structures, v. 316 (Juli 2023). (2023):
- Uncertainty Analysis in Predicting Differential Settlement at the Interface between Bridge Deck and Subgrade. In: Journal of Performance of Constructed Facilities (ASCE), v. 36, n. 3 (Juni 2022). (2022):
- Three-Dimensional Structure Research of Anode-Supported Planar Solid Oxide Fuel Cells. In: Journal of Energy Engineering, v. 148, n. 3 (Juni 2022). (2022):
- Using layered double hydroxides and anion exchange resin to improve the mechanical properties and chloride binding capacity of cement mortars. In: Construction and Building Materials, v. 272 (Februar 2021). (2021):
- Thermal performance of a solar storage packed bed using spherical capsules filled with PCM having different melting points. In: Energy and Buildings, v. 68 (Januar 2014). (2014):
- Study on mechanical properties of honeycomb pentamode structures fabricated by laser additive manufacturing: Numerical simulation and experimental verification. In: Composite Structures, v. 226 (Oktober 2019). (2019):
- (2020): A Semianalytical Solution for Passively Loaded Piles Adjacent to Surcharge Load. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- Yield stress and thixotropy control of 3D-printed calcium sulfoaluminate cement composites with metakaolin related to structural build-up. In: Construction and Building Materials, v. 252 (August 2020). (2020):
- Utilization of waste from alumina industry to produce sustainable cement-based materials. In: Construction and Building Materials, v. 229 (Dezember 2019). (2019):
- Thermoelastic Transient Behavior for a Clamped FGM Circular Plate. In: International Journal of Structural Stability and Dynamics, v. 14, n. 4 (April 2014). (2014):