Lei Yang 
- (2024): The rainstorm waterlogging resistance of a novel fiber-reinforced self-compacting recycled pervious concrete after freeze-thaw cycles. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Impact of microwave radiation on recycled concrete powder in cement-based materials: Structure, hydration activity and mechanism. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2024): Recycled coarse aggregate from parent concrete with supplementary cementitious materials under freeze-thaw environment: Recyclability, environment and economic evaluation. In: Journal of Building Engineering, v. 84 (Mai 2024).
- (2024): A novel water-swelling grouting material formulation and its performance for water rushing in karst strata. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2024): Mechanical behavior, acoustic emission and principal strain field evolution properties of layered cemented paste backfill under unconfined compression. In: Construction and Building Materials, v. 415 (Februar 2024).
- (2024): The impact of original aggregate and attached mortar types of recycled aggregates on the sulfuric acid resistance of geopolymer recycled concrete. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Research on mechanical property of glued timber truss connected by steel plates and bolts. In: Structures, v. 57 (November 2023).
- (2023): Quasi-static cyclic tests and numerical study of seismic performance of confined masonry walls reinforced with horizontal steel bars. In: Structures, v. 57 (November 2023).
- (2023): Microwave hydrothermal synthesis of tobermorite for the solidification of iron. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): Multi-scale triple-attention network for pixelwise crack segmentation. In: Automation in Construction, v. 150 (Juni 2023).
- (2023): Performance investigation of blast furnace slag based cemented paste backfill under low temperature and low atmospheric pressure. In: Construction and Building Materials, v. 363 (Januar 2023).
- (2023): Preventing the secondary salt deterioration in the repaired area of basal erosion of earthen sites based on capillary barrier effect. In: Construction and Building Materials, v. 366 (Februar 2023).
- (2022): Multi-impact performance of prestressed CFRP-strengthened RC beams using H-typed end anchors. In: Marine Structures, v. 85 (September 2022).
- (2021): Microwave curing cement-fly ash blended paste. In: Construction and Building Materials, v. 282 (Mai 2021).
- (2021): Mix design and rheological properties of magnesium potassium phosphate cement composites based on the 3D printing extrusion system. In: Construction and Building Materials, v. 284 (Mai 2021).
- (2022): Investigation of Fracture Performance and Interface Stress Behavior of Zn–Zn-Al Multilayer Coating–304 Stainless Steel Substrate System. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 3 (März 2022).
- (2022): Microwave preparation and carbonation properties of low-carbon cement. In: Construction and Building Materials, v. 320 (Februar 2022).
- (2021): Investigation on the mechanical properties of CSA cement-based coating and its application. In: Construction and Building Materials, v. 305 (Oktober 2021).
- (2021): Properties of composite cement-sodium silicate grout mixed with sulphoaluminate cement and slag powder in flowing water. In: Construction and Building Materials, v. 308 (November 2021).
- (2017): Integrated impedance and Lamb wave–based structural health monitoring strategy for long-term cycle-loaded composite structure. In: Structural Health Monitoring, v. 17, n. 4 (Juli 2017).
- (2020): Modification of Lime-Fly Ash-Crushed Stone with Phosphogypsum for Road Base. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2019): Research of an integrated cooling system consisted of compression refrigeration and pump-driven heat pipe for data centers. In: Energy and Buildings, v. 187 (März 2019).
- (2020): Low-velocity impact behaviors of a fully thermoplastic composite laminate fabricated with an innovative acrylic resin. In: Composite Structures, v. 250 (Oktober 2020).
- (2019): A new constitutive model for steel fibre reinforced concrete subjected to dynamic loads. In: Composite Structures, v. 221 (August 2019).
- (2020): Passive wireless sensors based on spark plasma sintering for ultra-high temperature measurements. In: Smart Materials and Structures, v. 29, n. 11 (September 2020).
- (2020): Reconstruction of full-field complex deformed shapes of thin-walled special-section beam structures based on in situ strain measurement. In: Advances in Structural Engineering, v. 23, n. 15 (Juni 2020).
- (2020): Influence of water removal techniques on the composition and microstructure of hardened calcium sulfoaluminate cement pastes. In: Materials and Structures, v. 53, n. 4 (26 Juni 2020).
- (2019): Prediction of dynamic increase factor for steel fibre reinforced concrete using a hybrid artificial intelligence model. In: Engineering Structures, v. 189 (Juni 2019).
- (2013): Physical filling effect of aggregate micro fines in cement concrete. In: Construction and Building Materials, v. 41 (April 2013).
- (2018): Influence of dry ice on the performance of Portland cement and its mechanism. In: Construction and Building Materials, v. 188 (November 2018).
Structurae kooperiert mit
