Shanyong Wang 
- (2024): Experimental research on the mechanical properties of alkali-resistant glass fiber concrete acting as tunnel seismic isolation layer under periodic cyclic dynamic loading. In: Case Studies in Construction Materials, v. 21 (Dezember 2024).
- (2024): Intelligent prediction model of a polymer fracture grouting effect based on a genetic algorithm-optimized back propagation neural network. In: Tunnelling and Underground Space Technology, v. 148 (Juni 2024).
- (2024): Modeling confined concrete behavior in finite element with a non-orthogonal elastoplastic model. In: Engineering Structures, v. 312 (August 2024).
- (2024): Numerical and Experimental Research on Diffusion Characteristic of Polymer Slurry in Narrow Slot at Constant Pressure. In: International Journal of Civil Engineering, v. 22, n. 8 (April 2024).
- (2024): Analytical Study on the Pullout Distribution of an Anchor with Multiple Grout Bulbs. In: International Journal of Geomechanics, v. 24, n. 1 (Januar 2024).
- (2023): Effects of hole shape on mechanical behavior and fracturing mechanism of rock: Implications for instability of underground openings. In: Tunnelling and Underground Space Technology, v. 141 (November 2023).
- (2023): Experimental and practical investigation of reinforcement mechanism on permeable polymer in loose area of drainage pipeline. In: Tunnelling and Underground Space Technology, v. 140 (Oktober 2023).
- (2023): Macro-micro mechanical properties and reinforcement mechanism of alkali-resistant glass fiber-reinforced concrete under alkaline environments. In: Construction and Building Materials, v. 368 (März 2023).
- (2023): Revisiting the Fundamental Concepts of Soil Mechanics Using the General Effective Stress Concept for Saturated Geomaterials. In: International Journal of Geomechanics, v. 23, n. 1 (Januar 2023).
- (2023): Study of the effect of seismic performance measures on a metro station structure in liquefiable soil. In: Tunnelling and Underground Space Technology, v. 131 (Januar 2023).
- (2018): Quantitative Characterization Method for the Microcontacts and Macrocontacts of Two-Dimensional Granular Materials. In: International Journal of Geomechanics, v. 18, n. 4 (April 2018).
- (2018): Numerical Study of the Failure Response and Fracture Propagation for Rock Specimens with Preexisting Flaws under Compression. In: International Journal of Geomechanics, v. 18, n. 7 (Juli 2018).
- (2019): Numerical Study for Compaction-Grouted Soil Nails with Multiple Grout Bulbs. In: International Journal of Geomechanics, v. 19, n. 2 (Februar 2019).
- (2020): Centrifuge Model Testing of Loess Landslides Induced by Excavation in Northwest China. In: International Journal of Geomechanics, v. 20, n. 4 (April 2020).
- (2021): Experimental Investigation of Cuttability Improvement for Hard Rock Fragmentation Using Conical Cutter. In: International Journal of Geomechanics, v. 21, n. 2 (Februar 2021).
- (2021): Study on the Applicability of an Improved Pile-Beam-Arch Method of Metro Station Construction in the Upper-Soft and Lower-Hard Stratum. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Experimental and practical investigation of the sealing efficiency of cement grouting in tortuous fractures with flowing water. In: Tunnelling and Underground Space Technology, v. 108 (Februar 2021).
- (2016): Experimental investigation of pressure grouting in sand. In: Soils and Foundations, v. 56, n. 2 (April 2016).
- (2018): Relationship between the shrinkage crack characteristics and the water content gradient of compacted clay liner in a landfill final cover. In: Soils and Foundations, v. 58, n. 6 (Dezember 2018).
- (2018): A practical ranking system for evaluation of industry viable phase change materials for use in concrete. In: Construction and Building Materials, v. 177 (Juli 2018).
- (2019): Development of thermal energy storage lightweight structural cementitious composites by means of macro-encapsulated PCM. In: Construction and Building Materials, v. 225 (November 2019).
- (2019): Experimental simulation analysis of the process and failure characteristics of spalling in D-shaped tunnels under true-triaxial loading conditions. In: Tunnelling and Underground Space Technology, v. 90 (August 2019).
- (2019): Strength and filtration stability of cement grouts in porous media. In: Tunnelling and Underground Space Technology, v. 89 (Juli 2019).
- (2019): Mechanical tests and engineering applicability of fibre plastic concrete used in tunnel design in active fault zones. In: Tunnelling and Underground Space Technology, v. 88 (Juni 2019).
- (2019): Loading Rate Effect of Rock Material with the Direct Tensile and Three Brazilian Disc Tests. In: Advances in Civil Engineering, v. 2019 ( 2019).
- (2018): Mechanical Properties of Artificial Structured Soils Under a Conventional Drained Loading–Unloading–Reloading Stress Path. In: International Journal of Civil Engineering, v. 16, n. 4 (Januar 2018).
- (2009): Experimental study of the effect of fines content on dynamic compaction grouting in completely decomposed granite of Hong Kong. In: Construction and Building Materials, v. 23, n. 3 (März 2009).
- (2018): Crack Characteristic and Permeability Change of Compacted Clay Liners with Different Liquid Limits under Dry-Wet Cycles. In: Advances in Civil Engineering, v. 2018 ( 2018).
- (2018): Experimental investigation of hard rock fragmentation using a conical pick on true triaxial test apparatus. In: Tunnelling and Underground Space Technology, v. 79 (September 2018).
- (2018): Analysis and engineering application investigation of multiple-hole grouting injections into porous media considering filtration effects. In: Construction and Building Materials, v. 186 (Oktober 2018).
Structurae kooperiert mit
