Li Song 
- (2024): Investigation of smart thermostat fault detection and diagnosis potential for air-conditioning systems using a Modelica/EnergyPlus co-simulation approach. In: Energy and Buildings, v. 309 (April 2024).
- (2024): Occupancy Sensor-enabled Demand Control Ventilation Using Virtual Outdoor Air Flow Meters in Air Handling Units without an Outdoor Air Flow Meter. In: Building and Environment, v. 257 (Juni 2024).
- : Impact of Acid, Salt, and Wetting-Drying Cycles on Weathering Deterioration of the Red Sandstone Used for Leshan Giant Buddha China. In: International Journal of Architectural Heritage.
- (2024): Investigating the fatigue performance of conventional reinforced concrete CRTS III ballastless track structures using a fatigue damage constitutive model. In: Engineering Structures, v. 303 (März 2024).
- (2023): Theoretical model of water vapor absorption–desorption equilibrium of concrete considering the effect of temperature. In: Construction and Building Materials, v. 375 (April 2023).
- (2024): Unification and calibration of steel corrosion models based on long-term natural corrosion. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Quantitative analysis of cost savings and occupants’ preferences in grid-interactive smart home operation. In: Science and Technology for the Built Environment, v. 29, n. 9 (Oktober 2023).
- (2023): Performance of State-Shared Multiagent Deep Reinforcement Learning Controlled Signal Corridor with Platooning-Based CAVs. In: Journal of Transportation Engineering, Part A: Systems, v. 149, n. 8 (August 2023).
- (2023): Long-term temperature acceleration effect of solar radiation heating on chloride transport in the CRTS III multilayer structure. In: Construction and Building Materials, v. 375 (April 2023).
- (2022): Investigation of different cooling tower fan control strategies using COP of actual chillers and calibrated models of actual cooling towers and fans. In: Energy and Buildings, v. 277 (Dezember 2022).
- (2022): A load-slip model for stud connector in steel-concrete composite structures. In: Advances in Structural Engineering, v. 26, n. 3 (September 2022).
- (2022): Temperature field and thermal effect analysis of CRTS III ballastless track structure under the outdoor natural environment. In: Construction and Building Materials, v. 358 (Dezember 2022).
- (2022): Shear behavior of stud connectors in steel bridge deck and ballastless track structural systems of high-speed railways. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2022): Multi-factor sensitivity analysis of chloride ingression: A case study for Hangzhou Bay Bridge. In: Construction and Building Materials, v. 330 (Mai 2022).
- (2022): Improving the Nonlinear Control Performance of the Supply Fan at Air Handling Units using a Gain Scheduling Control Strategy. In: Science and Technology for the Built Environment, v. 28, n. 9 (August 2022).
- (2021): Study on Sectional Nonuniform Corrosion and Bond Strength of Plain Rebar Embedded in Concrete. In: KSCE Journal of Civil Engineering, v. 25, n. 8 (Juni 2021).
- (2019): Survey of particle production rates from process activities in pharmaceutical and biological cleanrooms. In: Science and Technology for the Built Environment, v. 25, n. 6 (3 Juli 2019).
- (2019): Uncertainty analysis for different virtual pump water flow meters. In: Science and Technology for the Built Environment, v. 25, n. 3 (März 2019).
- (2018): Performance assessment of variable frequency drives in heating, ventilation, and air-conditioning systems. In: Science and Technology for the Built Environment, v. 24, n. 10 (November 2018).
- (2017): Minimization of electricity demand and cost for multi-zone buildings: Part I—Modeling and validation. In: Science and Technology for the Built Environment, v. 23, n. 6 (August 2017).
- (2014): Restoration of long-term missing gaps in solar radiation. In: Energy and Buildings, v. 82 (Oktober 2014).
- (2015): Using a hybrid method to construct a computational efficient cooling coil model for an automated single-duct variable air volume system fault detection and diagnosis. In: Energy and Buildings, v. 92 (April 2015).
- (2019): Predicting home thermal dynamics using a reduced-order model and automated real-time parameter estimation. In: Energy and Buildings, v. 198 (September 2019).
- (2020): Thermal deformation and interfacial separation of a CRTS II slab ballastless track multilayer structure used in high-speed railways based on meteorological data. In: Construction and Building Materials, v. 237 (März 2020).
- (2019): Theoretical study on pipe friction parameters identification in water distribution systems. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 46, n. 9 (September 2019).
- (2015): Fatigue performance of corroded reinforced concrete beams strengthened with CFRP sheets. In: Construction and Building Materials, v. 90 (August 2015).
- (2016): Quantitative moisture model of interior concrete in structures exposed to natural weather. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2016): Progressive collapse of RC frame structures after a centre column loss. In: Magazine of Concrete Research, v. 68, n. 8 (April 2016).
- (2016): Reliability analysis of underground excavation in elastic-strain-softening rock mass. In: Tunnelling and Underground Space Technology, v. 60 (November 2016).
- (2016): Progressive Collapse Resistance of RC Frames under a Side Column Removal Scenario: The Mechanism Explained. In: International Journal of Concrete Structures and Materials, v. 10, n. 2 (Juni 2016).
Structurae kooperiert mit
