0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

Ahmed Shalaby ORCID

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Tawfik, Menna / Shehayeb, Dina / Abdelaty, Asmaa / de Freitas, Rita Pinto / Shalaby, Ahmed (2022): Relationship between Spatial Analysis of Streets and Walking Behavior. In: Journal of Urban Planning and Development, v. 148, n. 2 (Juni 2022).

    https://doi.org/10.1061/(asce)up.1943-5444.0000826

  2. Easa, Said M. / Shalaby, Ahmed / Abd El Halim, A. O. (1996): Reliability-Based Model for Predicting Pavement Thermal Cracking. In: Journal of Transportation Engineering, v. 122, n. 5 (September 1996).

    https://doi.org/10.1061/(asce)0733-947x(1996)122:5(374)

  3. Gendy, Amin El / Shalaby, Ahmed (2007): Mean Profile Depth of Pavement Surface Macrotexture Using Photometric Stereo Techniques. In: Journal of Transportation Engineering, v. 133, n. 7 (Juli 2007).

    https://doi.org/10.1061/(asce)0733-947x(2007)133:7(433)

  4. Abdel Aty Mohamed, Asmaa / Amin, Ahmed / Shalaby, Ahmed (2016): Participatory Landscape: Better Scenario for Poor Egyptian Urban Settings in Existing and New City Districts—Case of Monshaet Nasser and 6th October City. In: Journal of Urban Planning and Development, v. 142, n. 1 (März 2016).

    https://doi.org/10.1061/(asce)up.1943-5444.0000278

  5. Materu, Salvatory John / Shalaby, Ahmed / Ghazy, A. (2021): Effects of Dosage of Warm Mix Asphalt Additive on Stiffness, Cracking Susceptibility, and Moisture Sensitivity Characteristics. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 48, n. 10 (Oktober 2021).

    https://doi.org/10.1139/cjce-2020-0090

  6. Hajibandeh, Erfan / Shalaby, Ahmed (2020): Dynamic Modulus and Rutting Performance of As-Built Hot-Mix Asphalt Using Small-Scale Specimens. In: Journal of Materials in Civil Engineering (ASCE), v. 32, n. 5 (Mai 2020).

    https://doi.org/10.1061/(asce)mt.1943-5533.0003130

  7. Moussa, Ahmed / Shalaby, Ahmed / Kavanagh, Leonnie / Maghoul, Pooneh (2019): Use of Rigid Geofoam Insulation to Mitigate Frost Heave at Shallow Culvert Installations. In: Journal of Cold Regions Engineering, v. 33, n. 3 (September 2019).

    https://doi.org/10.1061/(asce)cr.1943-5495.0000185

  8. Serag El Din, Hamam / Shalaby, Ahmed / Farouh, Hend Elsayed / Elariane, Sarah A. (2013): Principles of urban quality of life for a neighborhood. In: HBRC Journal, v. 9, n. 1 (April 2013).

    https://doi.org/10.1016/j.hbrcj.2013.02.007

  9. Soliman, Haithem / Shalaby, Ahmed / Kavanagh, Leonnie (2008): Performance Evaluation of Joint and Crack Sealants in Cold Climates Using DSR and BBR Tests. In: Journal of Materials in Civil Engineering (ASCE), v. 20, n. 7 (Juli 2008).

    https://doi.org/10.1061/(asce)0899-1561(2008)20:7(470)

  10. Soliman, Haithem / Shalaby, Ahmed (2009): Characterizing the Low-Temperature Performance of Hot-Pour Bituminous Sealants Using Glass Transition Temperature and Dynamic Stiffness Modulus. In: Journal of Materials in Civil Engineering (ASCE), v. 21, n. 11 (November 2009).

    https://doi.org/10.1061/(asce)0899-1561(2009)21:11(688)

  11. Soliman, Haithem / Shalaby, Ahmed (2014): Characterizing the performance of cementitious partial-depth repair materials in cold climates. In: Construction and Building Materials, v. 70 (November 2014).

    https://doi.org/10.1016/j.conbuildmat.2014.07.114

  12. Esfandiarpour, Saman / Shalaby, Ahmed (2017): Local calibration of creep compliance models of asphalt concrete. In: Construction and Building Materials, v. 132 (Februar 2017).

    https://doi.org/10.1016/j.conbuildmat.2016.12.008

  13. Kavanagh, Leonnie / Soliman, Haithem / Shalaby, Ahmed (2016): Toward best practices for construction and maintenance of through-grade culverts to mitigate pavement roughness. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 43, n. 2 (Februar 2016).

    https://doi.org/10.1139/cjce-2015-0137

  14. Zhi, Xun / Shalaby, Ahmed / Middleton, Dan / Clayton, Alan (1999): Evaluation of weigh-in-motion in Manitoba. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 26, n. 5 (Oktober 1999).

    https://doi.org/10.1139/l99-025

  15. Shalaby, Ahmed (2002): Modelling short-term aging of asphalt binders using the rolling thin film oven test. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 29, n. 1 (Februar 2002).

    https://doi.org/10.1139/l01-086

  16. Shalaby, Ahmed / Reggin, Alan (2002): Surface rutting of thin pavements and gravel roads under standard and reduced tire inflation pressures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 29, n. 5 (Oktober 2002).

    https://doi.org/10.1139/l02-056

  17. Liu, Qingfan / Shalaby, Ahmed (2013): Simulation of pavement response to tire pressure and shape of contact area. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 40, n. 3 (März 2013).

    https://doi.org/10.1139/cjce-2011-0567

  18. Kavanagh, Leonnie / Shalaby, Ahmed (2012): Mechanistic–empirical damage analysis and impacts of reduced tire pressure on thaw weakened flexible pavements using the AI and MEPDG models. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 39, n. 7 (Juli 2012).

    https://doi.org/10.1139/l2012-065

  19. Harran, Ghareib / Shalaby, Ahmed (2009): Improving the prediction of the dynamic modulus of fine-graded asphalt concrete mixtures at high temperatures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 36, n. 2 (Februar 2009).

    https://doi.org/10.1139/l08-123

  20. Shalaby, Ahmed / Reggin, Alan (2007): Optimization of data collection needs for manual and automated network-level pavement condition ratings based on transverse variability and neural networks. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 34, n. 2 (Februar 2007).

    https://doi.org/10.1139/l06-126

  21. Shalaby, Ahmed / Liske, Tara / Kavussi, Amir (2004): Comparing back-calculated and laboratory resilient moduli of bituminous paving mixtures. In: Canadian Journal of Civil Engineering / Revue canadienne de génie civil, v. 31, n. 6 (Dezember 2004).

    https://doi.org/10.1139/l04-065

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine