Jay Sanjayan 
- (2024): Flexural Fatigue Performance of Pavement-Grade Low-Carbon Concrete Containing Waste Clay Bricks. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 11 (November 2024).
- (2024): Impact response of textile-reinforced 3D printed concrete panels. In: Engineering Structures, v. 315 (September 2024).
- (2024): Impact and Potential of Reclaimed Water-based Paint in Concrete. In: Journal of Building Engineering, v. 94 (Oktober 2024).
- (2024): Investigation of Axial Load Capacity of 3D-Printed Concrete Wall. In: Journal of Structural Engineering (ASCE), v. 150, n. 8 (August 2024).
- (2024): In-process textile reinforcement method for 3D concrete printing and its structural performance. In: Engineering Structures, v. 314 (September 2024).
- (2023): Impact of stabilisation on mechanical properties of recycled concrete aggregate mixed with waste tyre rubber as a pavement material. In: Case Studies in Construction Materials, v. 18 (Juli 2023).
- (2023): Experimental and numerical investigation of novel light weight concrete panels made with aerogel and phase change materials. In: Energy and Buildings, v. 283 (März 2023).
- (2023): Investigation of waste clay brick as partial replacement in geopolymer binder. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): Enhancing the chemical foaming process using superplasticizer in aerated geopolymer concrete. In: Construction and Building Materials, v. 324 (März 2022).
- (2022): Experimental investigation of the impact of design and control parameters of water-based active phase change materials system on thermal energy storage. In: Energy and Buildings, v. 268 (August 2022).
- (2022): Lap Joint Reinforcement for 3D Concrete Printing. In: Journal of Structural Engineering (ASCE), v. 148, n. 6 (Juni 2022).
- (2021): Investigation of waste clay brick as partial replacement of geopolymer binders for rigid pavement application. In: Construction and Building Materials, v. 305 (Oktober 2021).
- (2021): Microstructural characterization of 3D printed concrete. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Evaluation of alkalinity changes and carbonation of geopolymer concrete exposed to wetting and drying. In: Journal of Building Engineering, v. 35 (März 2021).
- (2016): Modelling the correlation between building energy ratings and heat-related mortality and morbidity. In: Sustainable Cities and Society, v. 22 (April 2016).
- (2021): Influence of recycled concrete aggregate on the foam stability of aerated geopolymer concrete. In: Construction and Building Materials, v. 271 (Februar 2021).
- (2016): Investigation of PCM as retrofitting option to enhance occupant thermal comfort in a modern residential building. In: Energy and Buildings, v. 133 (Dezember 2016).
- (2017): Evaluating the passive and free cooling application methods of phase change materials in residential buildings: A comparative study. In: Energy and Buildings, v. 148 (August 2017).
- (2018): A mixed methods design for building occupants’ energy behavior research. In: Energy and Buildings, v. 166 (Mai 2018).
- (2020): Enhancing the mechanical and thermal properties of aerated geopolymer concrete using porous lightweight aggregates. In: Construction and Building Materials, v. 264 (Dezember 2020).
- (2020): Mechanical Properties Evaluation of Functionally Layered Cement Composites. In: The Open Civil Engineering Journal, v. 14, n. 1 (18 Februar 2020).
- (2020): Mesh reinforcing method for 3D Concrete Printing. In: Automation in Construction, v. 109 (Januar 2020).
- (2019): Experimental Research on Using Form-stable PCM-Integrated Cementitious Composite for Reducing Overheating in Buildings. In: Buildings, v. 9, n. 3 (März 2019).
- (2019): Mechanical properties and durability of unconfined and confined geopolymer concrete with fiber reinforced polymers exposed to sulfuric acid. In: Construction and Building Materials, v. 215 (August 2019).
- (2018): Mitigation of heat stress risks through building energy efficiency upgrade: a case study of Melbourne, Australia. In: Australian Journal of Civil Engineering, v. 16, n. 1 ( 2018).
- (2019): Mechanical anisotropy of aligned fiber reinforced composite for extrusion-based 3D printing. In: Construction and Building Materials, v. 202 (März 2019).
- (2015): Laboratory Evaluation of the Use of Cement-Treated Construction and Demolition Materials in Pavement Base and Subbase Applications. In: Journal of Materials in Civil Engineering (ASCE), v. 27, n. 6 (Juni 2015).
- (2011): Investigation of the Cause of Disintegration of Alkali-Activated Slag at Temperature Exposure of 50°C. In: Journal of Materials in Civil Engineering (ASCE), v. 23, n. 12 (Dezember 2011).
- (2017): Micromechanics-based investigation of a sustainable ambient temperature cured one-part strain hardening geopolymer composite. In: Construction and Building Materials, v. 131 (Januar 2017).
- (2017): Modified 3D printed powder to cement-based material and mechanical properties of cement scaffold used in 3D printing. In: Construction and Building Materials, v. 138 (Mai 2017).
Structurae kooperiert mit
