Pere Roca 
- (2023): Effect of cross section aspect ratio and bearing surfaces treatment on the compressive strength of solid fired clay brick specimens. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): Effect of joint deformability on the experimental and numerical response of dry-joint masonry arches subjected to large support displacements. In: Engineering Structures, v. 275 (Januar 2023).
- (2022): Anisotropy and compressive strength evaluation of solid fired clay bricks by testing small specimens. In: Construction and Building Materials, v. 344 (August 2022).
- (2022): Comparison of Similitude Laws Applied to Multi-Storey Masonry Structures with Flexible Diaphragms. In: Journal of Earthquake Engineering, v. 27, n. 5 (Februar 2022).
- (2022): Cyclic shear-compression testing of brick masonry walls repaired and retrofitted with basalt textile reinforced mortar. In: Composite Structures, v. 283 (März 2022).
- (2020): Automated data analysis for static structural health monitoring of masonry heritage structures. In: Structural Control and Health Monitoring, v. 27, n. 10 (2 September 2020).
- (2019): Cylindrical samples of brick masonry with aerial lime mortar under compression: Experimental and numerical study. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2019): Analytical Derivation of Seismic Fragility Curves for Historical Masonry Structures Based on Stochastic Analysis of Uncertain Material Parameters. In: International Journal of Architectural Heritage, v. 13, n. 7 ( 2019).
- (2017): Dynamic investigation of a large historical cathedral. In: Structural Control and Health Monitoring, v. 24, n. 3 (März 2017).
- (2013): Empirical equations for the assessment of the load-bearing capacity of brick masonry walls. In: Construction and Building Materials, v. 44 (Juli 2013).
- (2014): Analytical method for the assessment of unreinforced brick masonry walls subjected to eccentric compressive loads. In: Construction and Building Materials, v. 73 (Dezember 2014).
- (2016): Compression test of masonry core samples extracted from existing brickwork. In: Construction and Building Materials, v. 119 (August 2016).
- (2016): Combining Brazilian tests on masonry cores and double punch tests for the mechanical characterization of historical mortars. In: Construction and Building Materials, v. 112 (Juni 2016).
- (2016): Compressive testing of an early 20th century brick masonry pillar. In: Materials and Structures, v. 49, n. 6 (Juni 2016).
- (2016): Compressive strength and elasticity of pure lime mortar masonry. In: Materials and Structures, v. 49, n. 3 (März 2016).
- (2011): Capacity of Shear Walls by Simple Equilibrium Models. In: International Journal of Architectural Heritage, v. 5, n. 4-5 (Juli 2011).
- (2016): Analysis of the Effect of Provisional Ties on the Construction and Current Deformation of Mallorca Cathedral. In: International Journal of Architectural Heritage, v. 10, n. 4 (Dezember 2016).
- (2015): Application of Particle Motion Technique to Structural Modal Identification of Heritage Buildings. In: International Journal of Architectural Heritage, v. 9, n. 3 (November 2015).
- (2013): Continuum FE models for the analysis of Mallorca Cathedral. In: Engineering Structures, v. 46 (Januar 2013).
- (2008): Cyclic constitutive model for concrete. In: Engineering Structures, v. 30, n. 3 (März 2008).
- (1998): Capacity of Masonry Arches and Spatial Frames. In: Journal of Structural Engineering (ASCE), v. 124, n. 6 (Juni 1998).
- (2015): Comparison of seismic analysis methods applied to a historical church struck by 2009 L'Aquila earthquake. In: Bulletin of Earthquake Engineering, v. 13, n. 12 (Juli 2015).
- (2017): Analysis of the performance in the linear field of Equivalent-Frame Models for regular and irregular masonry walls. In: Engineering Structures, v. 145 (August 2017).
- (2005): Dry Joint Stone Masonry Walls Subjected to In-Plane Combined Loading. In: Journal of Structural Engineering (ASCE), v. 131, n. 11 (November 2005).
- (2017): Dynamic Identification and Static Loading Tests of Timbrel Vaults: Application to a Modernist 20th Century Heritage Structure. In: International Journal of Architectural Heritage, v. 11, n. 4 ( 2017).
- (2018): An Enhanced Finite Element Macro-Model for the Realistic Simulation of Localized Cracks in Masonry Structures: A Large-Scale Application. In: International Journal of Architectural Heritage, v. 12, n. 3 (Juli 2018).
- (2018): Combined In-Situ and Laboratory Minor Destructive Testing of Historical Mortars. In: International Journal of Architectural Heritage, v. 12, n. 3 (Juli 2018).
- (2006): Assessment of masonry shear-walls by simple equilibrium models. In: Construction and Building Materials, v. 20, n. 4 (Mai 2006).
- (1998): Análisis resistente de construcciones de obra de fábrica. Aplicación a puentes arco. In: Hormigón y acero, v. 49, n. 209 (3. Quartal 1998).
- (2000): Análisis de edificios de muros de carga de mampostería ante acciones horizontales. In: Hormigón y acero, v. 51, n. 215 (1. Quartal 2000).
Structurae kooperiert mit
