0
  • DE
  • EN
  • FR
  • Internationale Datenbank und Galerie für Ingenieurbauwerke

Anzeige

D. M. Potts

Die folgende Bibliografie enthält alle in dieser Datenbank indizierten Veröffentlichungen, die mit diesem Namen als Autor, Herausgeber oder anderweitig Beitragenden verbunden sind.

  1. Ruiz López, A. / Tsiampousi, A. / Standing, J. R. / Potts, D. M. (2024): A new model for simulating the behaviour of grey cast iron tunnel joints with structural elements in geotechnical analysis. In: Engineering Structures, v. 304 (April 2024).

    https://doi.org/10.1016/j.engstruct.2023.117354

  2. Potts, D. M. / Dounias, G. T. / Vaughan, P. R. (1987): Finite element analysis of the direct shear box test. In: Géotechnique, v. 37, n. 1 (März 1987).

    https://doi.org/10.1680/geot.1987.37.1.11

  3. Zdravkovic, L. / Potts, D. M. / Hight, D. W. (2002): The effect of strength anisotropy on the behaviour of embankments on soft ground. In: Géotechnique, v. 52, n. 6 (August 2002).

    https://doi.org/10.1680/geot.2002.52.6.447

  4. Potts, D. M. / Dounias, G. T. / Vaughan, P. R. (1990): Finite element analysis of progressive failure of Carsington embankment. In: Géotechnique, v. 40, n. 1 (März 1990).

    https://doi.org/10.1680/geot.1990.40.1.79

  5. Potts, D. M. / Kovacevic, N. / Vaughan, P. R. (1997): Delayed collapse of cut slopes in stiff clay. In: Géotechnique, v. 47, n. 5 (Oktober 1997).

    https://doi.org/10.1680/geot.1997.47.5.953

  6. Schroeder, F. C. / Potts, D. M. / Addenbrooke, T. I. (2004): The influence of pile group loading on existing tunnels. In: Géotechnique, v. 54, n. 6 (August 2004).

    https://doi.org/10.1680/geot.2004.54.6.351

  7. Potts, D. M. / Zdravkovic, L. (2012): Accounting for partial material factors in numerical analysis. In: Géotechnique, v. 62, n. 12 (Dezember 2012).

    https://doi.org/10.1680/geot.11.P.057

  8. Potts, D. M. / Fourie, A. B. (1984): The behaviour of a propped retaining wall: results of a numerical experiment. In: Géotechnique, v. 34, n. 3 (September 1984).

    https://doi.org/10.1680/geot.1984.34.3.383

  9. Potts, D. M. (2003): Numerical analysis: a virtual dream or practical reality?. In: Géotechnique, v. 53, n. 6 (August 2003).

    https://doi.org/10.1680/geot.2003.53.6.535

  10. Zdravkovic, L. / Potts, D. M. / St John, H. D. (2005): Modelling of a 3D excavation in finite element analysis. In: Géotechnique, v. 55, n. 7 (September 2005).

    https://doi.org/10.1680/geot.2005.55.7.497

  11. Wan, M. S. P. / Standing, J. R. / Potts, D. M. / Burland, J. B. (2018): Measured short-term subsurface ground displacements from EPBM tunnelling in London Clay. Vorgetragen bei: Tunnelling in the Urban Environment, Géotechnique Symposium, 2017.

    https://doi.org/10.1680/tue.63778.005

  12. Avgerinos, V. / Potts, D. M. / Standing, J. R. (2018): Numerical investigation of the effects of tunnelling on existing tunnels. Vorgetragen bei: Tunnelling in the Urban Environment, Géotechnique Symposium, 2017.

    https://doi.org/10.1680/tue.63778.091

  13. Hubbard, H. W. / Potts, D. M. / Miller, D. / Burland, J. B. (1984): Design of the retaining walls for the M25 cut and cover tunnel at Bell Common. In: Géotechnique, v. 34, n. 4 (Dezember 1984).

    https://doi.org/10.1680/geot.1984.34.4.495

  14. Shin, J. H. / Addenbrooke, T. I. / Potts, D. M. (2002): A numerical study of the effect of groundwater movement on long-term tunnel behaviour. In: Géotechnique, v. 52, n. 6 (August 2002).

    https://doi.org/10.1680/geot.2002.52.6.391

  15. Addenbrooke, T. I. / Potts, D. M. / Puzrin, A. M. (1997): The influence of pre-failure soil stiffness on the numerical analysis of tunnel construction. In: Géotechnique, v. 47, n. 3 (Juni 1997).

    https://doi.org/10.1680/geot.1997.47.3.693

  16. Franzius, J. N. / Potts, D. M. / Burland, J. B. (2005): The influence of soil anisotropy and K₀ on ground surface movements resulting from tunnel excavation. In: Géotechnique, v. 55, n. 3 (April 2005).

    https://doi.org/10.1680/geot.2005.55.3.189

  17. Kovacevic, N. / Hight, D. W. / Potts, D. M. / Carter, I. C. (2013): Finite-element analysis of the failure and reconstruction of the main dam embankment at Abberton Reservoir, Essex, UK. In: Géotechnique, v. 63, n. 9 (Juli 2013).

    https://doi.org/10.1680/geot.12.p.066

  18. Zdravkovic, L. / Potts, D. M. / Jackson, C. (2003): Numerical Study of the Effect of Preloading on Undrained Bearing Capacity. In: International Journal of Geomechanics, v. 3, n. 1 (September 2003).

    https://doi.org/10.1061/(asce)1532-3641(2003)3:1(1)

  19. Franzius, J. N. / Potts, D. M. (2005): Influence of Mesh Geometry on Three-Dimensional Finite-Element Analysis of Tunnel Excavation. In: International Journal of Geomechanics, v. 5, n. 3 (September 2005).

    https://doi.org/10.1061/(asce)1532-3641(2005)5:3(256)

  20. Grammatikopoulou, A. / Zdravkovic, L. / Potts, D. M. (2006): General Formulation of Two Kinematic Hardening Constitutive Models with a Smooth Elastoplastic Transition. In: International Journal of Geomechanics, v. 6, n. 5 (September 2006).

    https://doi.org/10.1061/(asce)1532-3641(2006)6:5(291)

  21. Summersgill, F. C. / Kontoe, S. / Potts, D. M. (2017): Critical Assessment of Nonlocal Strain-Softening Methods in Biaxial Compression. In: International Journal of Geomechanics, v. 17, n. 7 (Juli 2017).

    https://doi.org/10.1061/(asce)gm.1943-5622.0000852

  22. Addenbrooke, T. I. / Ong, J. C. W. / Potts, D. M. (2002): Finite-element analysis of a compensation grouting field trial in soft clay. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 155, n. 1 (Januar 2002).

    https://doi.org/10.1680/geng.2002.155.1.47

  23. Grammatikopoulou, A. / St John, H. D. / Potts, D. M. (2008): Non-linear and linear models in design of retaining walls. In: Proceedings of the Institution of Civil Engineers - Geotechnical Engineering, v. 161, n. 6 (Dezember 2008).

    https://doi.org/10.1680/geng.2008.161.6.311

  24. Vollum, R. L. / Izzuddin, B. A. / Abela, J. M. / Potts, D. M. (2011): Blinding struts, Part 2: Towards a simplified design method. In: Engineering Structures, v. 33, n. 9 (September 2011).

    https://doi.org/10.1016/j.engstruct.2011.05.010

  25. Abela, J. M. / Vollum, R. L. / Izzuddin, B. A. / Potts, D. M. (2011): Blinding struts — Part 1: Buckling response. In: Engineering Structures, v. 33, n. 9 (September 2011).

    https://doi.org/10.1016/j.engstruct.2011.05.002

  26. Potts, D. M. (1993): The analysis of earth retaining structures. Vorgetragen bei: Retaining Structures, Robinson College, Cambridge, 20-23 July 1992.
  27. St. John, H. D. / Harris, D. I. / Potts, D. M. / Fernie, R. (1993): Design study for a cantilever bored pile retaining wall with relieving slabs. Vorgetragen bei: Retaining Structures, Robinson College, Cambridge, 20-23 July 1992.
  28. Harris, D. I. / Hight, D. W. / Higgins, K. G. / Potts, D. M. / Brady, K. C. (1993): Finite element analysis of anchored earth retaining walls. Vorgetragen bei: Retaining Structures, Robinson College, Cambridge, 20-23 July 1992.
  29. Thilakasiri, H. S. / Potts, D. M. / Kontoe, S. / Zdravkovic, L. (2009): Earthquake Induced Kinematic Forces on Pile Foundations in Layered Medium. In: Engineer: Journal of the Institution of Engineers, Sri Lanka, v. 42, n. 4 (Oktober 2009).

    https://doi.org/10.4038/engineer.v42i4.7034

  30. Colombero, R. / Kontoe, S. / Foti, S. / Potts, D. M. (2015): Numerical modelling of drop load tests. In: Soil Dynamics and Earthquake Engineering, v. 77 (Oktober 2015).

    https://doi.org/10.1016/j.soildyn.2015.05.012

Eine Veröffentlichung suchen...

Nur verfügbar mit
Mein Structurae

Volltext
Structurae kooperiert mit
International Association for Bridge and Structural Engineering (IABSE)
e-mosty Magazine
e-BrIM Magazine