Juhyuk Moon 
- (2024): Verification of the presence of superabsorbent polymers (SAP) in fresh concrete: results of an interlaboratory study of RILEM TC 260-RSC. In: Materials and Structures, v. 57, n. 4 (12 April 2024).
- (2023): Hydrophobic treatment on hollow glass microspheres for enhancing the flowability of lightweight high-performance cementitious composites. In: Construction and Building Materials, v. 409 (Dezember 2023).
- (2023): Utilization of low reactive bottom ash in cement formulation through Na2CO3 triggered pozzolanic reaction. In: Construction and Building Materials, v. 408 (Dezember 2023).
- (2024): Mechanochemical activation for transforming bottom ash to reactive supplementary cementitious material. In: Construction and Building Materials, v. 411 (Januar 2024).
- (2023): Microplastics as lightweight aggregates for ultra-high performance concrete: Mechanical properties and autoignition at elevated temperatures. In: Composite Structures, v. 321 (Oktober 2023).
- (2012): Microstructural and compositional change of NaOH-activated high calcium fly ash by incorporating Na-aluminate and co-existence of geopolymeric gel and C–S–H(I). In: Cement and Concrete Research, v. 42, n. 5 (Mai 2012).
- (2018): Importance of drying to control internal curing effects on field casting ultra-high performance concrete. In: Cement and Concrete Research, v. 108 (Juni 2018).
- (2019): The use of rice husk ash as reactive filler in ultra-high performance concrete. In: Cement and Concrete Research, v. 115 (Januar 2019).
- (2023): Importance of amorphous content, surface energy, and preferred orientation on the accurate quantification of cement minerals in clinkers. In: Journal of Building Engineering, v. 66 (Mai 2023).
- (2022): Influence of calcination temperature of impure kaolinitic clay on hydration and strength development of ultra-high-performance cementitious composite. In: Construction and Building Materials, v. 326 (April 2022).
- (2022): Self-heating capacity of electrically conductive cement composites: Effects of curing conditions. In: Construction and Building Materials, v. 353 (Oktober 2022).
- (2022): Tomographic microstructural investigation of waste fishing net-reinforced high performance cementitious composites. In: Journal of Building Engineering, v. 56 (September 2022).
- (2021): Three-dimensional transport properties of mortar with a high water-to-cement ratio using X-ray computed tomography. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Predicting airborne chloride deposition in marine bridge structures using an artificial neural network model. In: Construction and Building Materials, v. 337 (Juni 2022).
- (2022): Utilization of lime-based alternative hydration to develop cementless UHPFRC. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Secondary curing effect on the hydration of ultra-high performance concrete. In: Construction and Building Materials, v. 298 (September 2021).
- (2021): Hydration characteristics of calcium sulfoaluminate (CSA) cement/portland cement blended pastes. In: Journal of Building Engineering, v. 34 (Februar 2021).
- (2019): Pozzolanic reaction on alkali-activated Class F fly ash for ambient condition curable structural materials. In: Construction and Building Materials, v. 218 (September 2019).
- (2016): Strength enhancement of alkaline activated fly ash cured at ambient temperature by delayed activation of substituted OPC. In: Construction and Building Materials, v. 122 (September 2016).
- (2018): Testing superabsorbent polymer (SAP) sorption properties prior to implementation in concrete: results of a RILEM Round-Robin Test. In: Materials and Structures, v. 51, n. 1 (Februar 2018).
Structurae kooperiert mit
