Ronaldo A. Medeiros-Junior 
- (2024): Incorporation of clay brick wastes and calcium hydroxide into geopolymers: Compressive strength, microstructure, and efflorescence. In: Journal of Building Engineering, v. 88 (Juli 2024).
- (2023): Mechanical properties of metakaolin-based geopolymers modified with different contents of quarry dust waste. In: Construction and Building Materials, v. 400 (Oktober 2023).
- (2023): Effect of carbonation curing on the physical, mechanical, and microstructural properties of metakaolin-based geopolymer concrete. In: Construction and Building Materials, v. 406 (November 2023).
- (2023): Calculation of Sulfate Diffusion Coefficients of Concrete Based on Migration Test. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 11 (November 2023).
- (2023): Migration test as an accelerated methodology in concrete for evaluating sulfate attack by Na2SO4 and MgSO4. In: Construction and Building Materials, v. 388 (Juli 2023).
- (2020): Durability of phosphogypsum-based supersulfated cement mortar against external attack by sodium and magnesium sulfate. In: Cement and Concrete Research, v. 136 (Oktober 2020).
- (2023): Influence of Content and Source of Calcium Sulfate on Supersulfated Cement Exposed to Sodium and Magnesium Sulfate Attack at Later Ages. In: Journal of Materials in Civil Engineering (ASCE), v. 35, n. 1 (Januar 2023).
- (2022): Effect of coarse aggregate size on corrosion of reinforced concrete exposed to carbonation and chloride ingress by electrochemical measurements. In: Construction and Building Materials, v. 361 (Dezember 2022).
- (2021): Comparison of test methods to determine resistance to chloride penetration in concrete: Sensitivity to the effect of fly ash. In: Construction and Building Materials, v. 277 (März 2021).
- (2022): Contribution to the service-life modeling of concrete exposed to sulfate attack by the inclusion of electrical resistivity data. In: Construction and Building Materials, v. 322 (März 2022).
- (2021): Mitigation potential of sulfate-resistant Portland cement for internal sulfate attack. In: Journal of Building Pathology and Rehabilitation, v. 7, n. 1 (20 November 2021).
- (2022): Alternative small-scale accelerated test to measure the effect of thermal shock on rendering mortar properties. In: Journal of Building Engineering, v. 46 (April 2022).
- (2021): Effect of crystalline admixture and polypropylene microfiber on the internal sulfate attack in Portland cement composites due to pyrite oxidation. In: Construction and Building Materials, v. 308 (November 2021).
- (2021): Effect of Crystalline Admixtures in the Mass Transport of Concrete with Polypropylene Microfibers. In: International Journal of Civil Engineering, v. 19, n. 12 (Juni 2021).
- (2021): Effect of hydrated lime on efflorescence formation. In: International Journal of Building Pathology and Adaptation, v. 40, n. 5 (April 2021).
- (2021): Effect of Fly Ash Contents in Autogenous Self-Healing of Conventional Concretes Analyzed Using Different Test Tools. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 7 (Juli 2021).
- (2020): Evaluation of concrete self-healing with different fly ash contents and cracking ages by means of ultrasonic pulse velocity and compressive strength tests. In: Journal of Building Pathology and Rehabilitation, v. 6, n. 1 (16 November 2020).
- (2020): Analysis of Different Parameters in the Electrical Resistivity Test of Concrete. In: International Journal of Civil Engineering, v. 19, n. 1 (August 2020).
- (2019): Behavior of mortars exposed to attack by sodium and magnesium sulfate. In: Journal of Building Pathology and Rehabilitation, v. 5, n. 1 (18 November 2019).
- (2021): Chloride ingress into concrete under different conditions of temperature and marine zones. In: Magazine of Concrete Research, v. 73, n. 22 (November 2021).
- (2018): Effect of chemical admixtures on concrete’s electrical resistivity. In: International Journal of Building Pathology and Adaptation, v. 36, n. 2 (Mai 2018).
- (2015): Carbonation depth in 57 years old concrete structures. In: Steel and Composite Structures, v. 19, n. 4 (Oktober 2015).
- (2018): Effect of the corrosion degree and the carbonation depth on the electrical resistivity, ultrasonic pulse velocity and corrosion potential. In: Journal of Building Pathology and Rehabilitation, v. 4, n. 1 (Dezember 2018).
- (2019): Improvement of repair mortars using multi-walled carbon nanotubes. In: Proceedings of the Institution of Civil Engineers - Construction Materials, v. 172, n. 2 (April 2019).
- (2016): Corrosion Degree Effect on Nominal and Effective Strengths of Naturally Corroded Reinforcement. In: Journal of Materials in Civil Engineering (ASCE), v. 28, n. 10 (Oktober 2016).
- (2016): Electrical resistivity of unsaturated concrete using different types of cement. In: Construction and Building Materials, v. 107 (März 2016).
- (2018): Fuzzy logic for estimating chloride diffusion in concrete. In: Proceedings of the Institution of Civil Engineers - Structures and Buildings, v. 171, n. 7 (Juli 2018).
- (2017): Effect of preconditioning temperature on the water absorption of concrete. In: Journal of Building Pathology and Rehabilitation, v. 3, n. 1 (Dezember 2017).
- (2017): Accelerated carbonation effect on electrical resistivity and sorptivity of concrete. In: Journal of Building Pathology and Rehabilitation, v. 3, n. 1 (Dezember 2017).
- (2018): Electrical resistivity as a durability parameter for concrete design: Experimental data versus estimation by mathematical model. In: Construction and Building Materials, v. 192 (Dezember 2018).
Structurae kooperiert mit
