Peng Liu 
- (2024): A novel candidate shape-stabilized phase change material for building energy conservation based on lauric acid/roasted iron tailings-expanded graphite. In: Construction and Building Materials, v. 428 (Mai 2024).
- (2024): Out-of-plane static and hysteretic behavior testing of the elevator guidance system. In: Journal of Building Engineering, v. 86 (Juni 2024).
- (2023): Research on the Mechanical Performance of a Mountainous Long-Span Steel Truss Arch Bridge with High and Low Arch Seats. In: Buildings, v. 13, n. 12 (22 November 2023).
- (2023): A multi-phase numerical simulation method for the changing process of expansion products on concrete under sulfate attack. In: Case Studies in Construction Materials, v. 19 (Dezember 2023).
- (2023): A novel alkali-activated cement from mineral admixture, superabsorbent polymers, and alkali-doped carboxylate glass. In: Construction and Building Materials, v. 383 (Juni 2023).
- (2023): An optimal operational scheduling model for energy-efficient building with dynamic heat loss prediction. In: Energy and Buildings, v. 280 (Februar 2023).
- (2023): Preparation and Properties of Double Liquid Grouting Materials (DLGMs) Used for the Regenerated Roof of a Coal Mine. In: Buildings, v. 13, n. 3 (26 Februar 2023).
- (2023): Preparation and performance investigation of a high efficiency cement permeation type waterproofing materials. In: Construction and Building Materials, v. 365 (Februar 2023).
- (2022): Research on Natural Gas Leakage Diffusion of Urban Underground Pipeline and its Explosion Hazard. In: KSCE Journal of Civil Engineering, v. 27, n. 2 (November 2022).
- (2023): Progressive failure prediction of three-dimensional woven composites using a generic multi-scale analytical model. In: Composite Structures, v. 303 (Januar 2023).
- (2022): Research on eccentric compressive behavior of steel fiber reinforced recycled concrete-filled GFRP tube columns. In: Composite Structures, v. 301 (Dezember 2022).
- (2022): MPSN: Motion-aware Pseudo-Siamese Network for indoor video head detection in buildings. In: Building and Environment, v. 222 (August 2022).
- (2022): Real-time topology optimization based on deep learning for moving morphable components. In: Automation in Construction, v. 142 (Oktober 2022).
- (2021): Preparation and performance of oxidized crumb rubber (OCR)/nano-SiO2 composite-modified asphalt. In: Construction and Building Materials, v. 279 (April 2021).
- (2022): Optimization of mix proportion of basic magnesium sulfate cement-based high-strength coral concrete. In: Construction and Building Materials, v. 341 (Juli 2022).
- (2020): Research on Low Altitude Illumination Configuration Technology of Highway Tunnel. In: IOP Conference Series: Materials Science and Engineering, v. 741, n. 1 (1 Januar 2020).
- (2022): Numerical and experimental studies on the cooling performance of backfill containing phase change materials. In: Building and Environment, v. 218 (Juni 2022).
- (2022): Optimization of continuous drive friction welding process for AA6061-T6 circular pipe and conical head. In: Structures, v. 36 (Februar 2022).
- (2021): Orthogonal Experimental Study on Heat Transfer Optimization of Backfill Slurry with Ice Particles. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Preparation and experimental study on the thermal characteristics of lightweight prefabricated nano-silica aerogel foam concrete wallboards. In: Construction and Building Materials, v. 272 (Februar 2021).
- (2016): Performance of a quasi-counter-flow air-to-air membrane energy exchanger in cold climates. In: Energy and Buildings, v. 119 (Mai 2016).
- (2020): Predicting the tensile and compressive failure behavior of angle-ply spread tow woven composites. In: Composite Structures, v. 234 (Februar 2020).
- (2016): Numerical analysis of bearing failure in countersunk composite joints using 3D explicit simulation method. In: Composite Structures, v. 138 (März 2016).
- (2020): Research on the Corrosion/Permeability/Frost Resistance of Concrete by Experimental and Microscopic Mechanisms Under Different Water–Binder Ratios. In: International Journal of Concrete Structures and Materials, v. 14, n. 1 (7 Januar 2020).
- (2020): Preparation and modification mechanism analysis of graphene oxide modified asphalts. In: Construction and Building Materials, v. 238 (März 2020).
- (2015): Review of heat/energy recovery exchangers for use in ZEBs in cold climate countries. In: Building and Environment, v. 84 (Januar 2015).
- (2016): Quantitative moisture model of interior concrete in structures exposed to natural weather. In: Construction and Building Materials, v. 102 (Januar 2016).
- (2016): Photocatalytic activity of Portland cement loaded with 3D hierarchical Bi 2 WO 6 microspheres under visible light. In: Construction and Building Materials, v. 120 (September 2016).
- (2016): Performance of photocatalytic cementitious material: Influence of substrate surface microstructure. In: Construction and Building Materials, v. 110 (Mai 2016).
- (2016): Numerical and experimental studies on the propulsion performance of a Wave Glide propulsor. In: China Ocean Engineering, v. 30, n. 3 (Juni 2016).
Structurae kooperiert mit
