Peng Liu 
- (2024): Macro-meso degradation evolution of fully recycled coarse aggregate concrete under sulfate attack in marine environment. In: Structures, v. 69 (November 2024).
- (2024): A Five-Phase Mesoscale Numerical Analysis Method for the Sulfate Attack Process on Recycled Aggregate Concrete. In: Journal of Materials in Civil Engineering (ASCE), v. 36, n. 7 (Juli 2024).
- (2024): Modelling of heat release rate of horizontal cable trays fire in long-narrow confined spaces. In: Tunnelling and Underground Space Technology, v. 150 (August 2024).
- (2024): Mesoscale-based mechanical parameters determination and compressive properties of fully recycled coarse aggregate concrete. In: Journal of Building Engineering, v. 90 (August 2024).
- (2023): Experimental study on the preparation of cementitious materials from iron ore tailings by activation. In: Construction and Building Materials, v. 385 (Juli 2023).
- (2024): Floor heave mechanism for gob-side entry retaining with concrete blocks and control method: A case study. In: Underground Space, v. 15 (April 2024).
- (2023): Experimental study on vibration suppression for robotic milling using an MRE absorber. In: Smart Materials and Structures, v. 32, n. 10 (30 August 2023).
- (2023): Feasibility study of highly alkaline biomass ash to activate alkali-activated grouts. In: Construction and Building Materials, v. 393 (August 2023).
- (2023): Mechanical behavior of soft rock roadway reinforced with NPR cables: A physical model test and case study. In: Tunnelling and Underground Space Technology, v. 138 (August 2023).
- (2022): A fusion framework for vision-based indoor occupancy estimation. In: Building and Environment, v. 225 (November 2022).
- (2022): Heat recovery ventilation design limitations due to LHC for different ventilation strategies in ZEB. In: Building and Environment, v. 224 (Oktober 2022).
- (2022): Influencing factors of mechanical and thermal conductivity of foamed phosphogypsum-based composite cementitious materials. In: Construction and Building Materials, v. 346 (September 2022).
- (2022): Flexural behaviour of seawater–sea sand concrete beams reinforced with GFRP bars: Effects of the reinforcement ratio, stirrup ratio, shear span ratio and prestress level. In: Journal of Building Engineering, v. 54 (August 2022).
- (2020): Mechanical Model for Joints of Immersed Tunnel Considering the Influence of Joint Differential Settlement. In: International Journal of Geosynthetics and Ground Engineering, v. 6, n. 4 (22 November 2020).
- (2022): Mechanism of thermal activation on granular coal gangue and its impact on the performance of cement mortars. In: Journal of Building Engineering, v. 45 (Januar 2022).
- (2021): Experimental study on the heat transfer characteristics of different walls with phase change materials in summer. In: Journal of Building Engineering, v. 44 (Dezember 2021).
- (2021): Identification of concrete aggregates using K-means clustering and level set method. In: Structures, v. 34 (Dezember 2021).
- (2021): The Impact of LED Colour Rendering on Reaction Time of Human Eyes in Tunnel Interior Zone. In: Advances in Civil Engineering, v. 2021 (Januar 2021).
- (2021): Explicit polynomial regression models of wind characteristics and structural effects on a long‐span bridge utilizing onsite monitoring data. In: Structural Control and Health Monitoring, v. 28, n. 5 (12 April 2021).
- (2020): Interior fracture analysis of rubber-cement composites based on X-ray computed tomography and digital volume correlation. In: Construction and Building Materials, v. 259 (Oktober 2020).
- (2021): Global Buckling Behavior of Welded Thick H-Shaped Axial Compression Columns of Q460GJ Steel. In: Journal of Materials in Civil Engineering (ASCE), v. 33, n. 1 (Januar 2021).
- (2020): Influence mechanisms under different immersion methods and different strengths of concrete in corrosive environments, and verification via long‐term field test. In: Structural Concrete, v. 21, n. 5 (Oktober 2020).
- (2020): Fatigue–healing performance evaluation of asphalt mixture using four-point bending test. In: Materials and Structures, v. 53, n. 3 (20 April 2020).
- (2020): Fabrication of a novel shape-stabilized composite phase change material based on multivariate supporting materials by using typical solid wastes. In: Construction and Building Materials, v. 240 (April 2020).
- (2020): Middle displacement monitoring of medium–small span bridges based on laser technology. In: Structural Control and Health Monitoring, v. 27, n. 4 (Januar 2020).
- (2019): An investigation on the climate-responsive design strategies of vernacular dwellings in Khams. In: Building and Environment, v. 161 (August 2019).
- (2020): Investigation of novel embedded piezoelectric ultrasonic transducers on crack and corrosion monitoring of steel bar. In: Construction and Building Materials, v. 235 (Februar 2020).
- (2019): Investigation on novel embedded piezoelectric ultrasonic transducers for corrosion monitoring of reinforced concrete. In: Smart Materials and Structures, v. 28, n. 11 (3 Oktober 2019).
- (2019): Highly sensitive and stable printed pressure sensor with microstructured grid arrays. In: Smart Materials and Structures, v. 28, n. 10 (29 August 2019).
- (2018): Hydrophobic and water-resisting behavior of Portland cement incorporated by oleic acid modified fly ash. In: Materials and Structures, v. 51, n. 2 (April 2018).
Structurae kooperiert mit
