Jun Liu 
- (2024): Influence of municipal solid waste incineration bottom ash particle size on cement hydration and performance. In: Construction and Building Materials, v. 432 (Juni 2024).
- (2024): Influence of Petroleum-Based and Bio-Derived Recycling Agents on High-RAP Asphalt Mixtures Performance. In: Buildings, v. 14, n. 3 (21 Februar 2024).
- (2024): Investigation of diffusion behavior, stability of testing ions, interconversion feasibility and microstructures of iodide and chloride in concrete. In: Journal of Building Engineering, v. 82 (April 2024).
- (2024): Macro–microscopic experimental and numerical simulation study of fiber‒mixed concrete under the salt–freezing effect. In: Journal of Building Engineering, v. 82 (April 2024).
- (2023): Manufacture of alkali-activated cementitious materials using municipal solid waste incineration (MSWI) ash: Immobilization of heavy metals in MSWI fly ash by MSWI bottom ash. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Investigating the effects of seawater and sea sand aggregates and supplementary cementitious materials on the early shrinkage and crack resistance of concrete. In: Construction and Building Materials, v. 392 (August 2023).
- (2023): Investigation of heavy gas dispersion characteristics in a static environment: Spatial distribution and volume flux prediction. In: Building and Environment, v. 242 (August 2023).
- (2023): Long-Term Investigation of a Borehole Heat Exchanger (BHE) Array with the Influence of Same Inlet Temperature (SIT) and Same Heat Load (SHL) Boundaries. In: Advances in Civil Engineering, v. 2023 (Februar 2023).
- (2022): The laboratory performance of asphalt mixture with thermoplastic polyurethane (TPU) and amorphous poly alpha olefin (APAO) compound modified asphalt binder. In: Construction and Building Materials, v. 349 (September 2022).
- (2022): Mechanics, hydration phase and pore development of embodied energy and carbon composites based on ultrahigh-volume low-carbon cement with limestone calcined clay. In: Case Studies in Construction Materials, v. 17 (Dezember 2022).
- (2022): Investigation on mechanical properties improvement of seawater engineered cementitious composites (ECC) using FA/LC2. In: Construction and Building Materials, v. 345 (August 2022).
- (2021): Influence of deicing salt on the surface properties of concrete specimens after 20 years. In: Construction and Building Materials, v. 295 (August 2021).
- (2021): Influence of the rainfall intensity on the chloride ion distribution in concrete with different levels of initial water saturation. In: Construction and Building Materials, v. 281 (April 2021).
- (2022): Modelling local failure around hard-rock tunnels based on a linked multiscale mesh strategy. In: Tunnelling and Underground Space Technology, v. 127 (September 2022).
- (2022): Incentive Mechanism of Construction Safety from the Perspective of Mutual Benefit. In: Buildings, v. 12, n. 5 (24 April 2022).
- (2022): Implementation of the Linear Amplitude Sweep Test to Evaluate Fatigue Resistance of Highly Polymerized Asphalt Binders. In: Journal of Materials in Civil Engineering (ASCE), v. 34, n. 5 (Mai 2022).
- (2022): Modeling and analysis of fiber-reinforced high-performance concrete strength prediction based on nonlinear programming. In: Construction and Building Materials, v. 322 (März 2022).
- (2020): Investigations on the impact behaviour of fibre-reinforced composites: effect of impact energy and impactor shape. In: Procedia Structural Integrity, v. 28 ( 2020).
- (2022): Innovative Booster for Dynamic Installation of OMNI-Max Anchor in Clay: Numerical Modeling. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 148, n. 1 (Januar 2022).
- (2021): Machine vision-based surface crack analysis for transportation infrastructure. In: Automation in Construction, v. 132 (Dezember 2021).
- (2021): Investigation on mechanical and micro properties of concrete incorporating seawater and sea sand in carbonized environment. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Mechanical properties and microstructure of multilayer graphene oxide cement mortar. In: Frontiers of Structural and Civil Engineering, v. 15, n. 4 (August 2021).
- (2018): Model Test Analysis of Excess Pore Water Pressure during the Sinking of a Pipe Pile with a Group of Holes. In: Journal of Highway and Transportation Research and Development (English Edition), v. 12, n. 2 (Juni 2018).
- (2020): Influencing factors analysis and operation optimization for the long-term performance of medium-deep borehole heat exchanger coupled ground source heat pump system. In: Energy and Buildings, v. 226 (November 2020).
- (2020): Modelling damage in fibre-reinforced thermoplastic composite laminates subjected to three-point bend loading. In: Composite Structures, v. 236 (März 2020).
- (2018): Model-based investigation of a heat pump driven, internally cooled liquid desiccant dehumidification system. In: Building and Environment, v. 143 (Oktober 2018).
- (2014): Large-scale shaking table model tests of aseismic measures for concrete faced rock-fill dams. In: Soil Dynamics and Earthquake Engineering, v. 61, n. 61-62 (Juni 2014).
- (2016): Large-scale shaking table model tests on seismically induced failure of Concrete-Faced Rockfill Dams. In: Soil Dynamics and Earthquake Engineering, v. 82 (März 2016).
- (2018): Keying Process of the OmniMax Anchor Shallowly Embedded in Undrained Normally Consolidated Clay. In: Journal of Waterway, Port, Coastal, and Ocean Engineering, v. 144, n. 4 (Juli 2018).
- (2016): Laboratory performance of warm mix asphalt binder containing polyphosphoric acid. In: Construction and Building Materials, v. 106 (März 2016).
Structurae kooperiert mit
