Jing Li 
- (2023): Experimental study of a heat recovery ventilator preheated by a Building Integrated Photovoltaic system in a cold climate. In: Journal of Physics: Conference Series, v. 2654, n. 1 (1 Dezember 2023).
- (2024): Impact Analysis Model of Landslide-generated Waves on Local Damage to Post-earthquake Arch Dams. In: KSCE Journal of Civil Engineering, v. 28, n. 7 (April 2024).
- (2024): Experimental study on chloride penetration of the new-to-old concrete interface. In: Construction and Building Materials, v. 420 (März 2024).
- (2024): Investigating the efficacy of multidimensional MoS2/PAN fiber composites within styrene-butadiene-styrene enhanced asphalt binder. In: Construction and Building Materials, v. 416 (Februar 2024).
- (2023): Improving flame retardancy, fume suppression and mechanical properties of SBS modified binder using nano-porous fibers prepared by electrospinning. In: Construction and Building Materials, v. 404 (November 2023).
- (2024): Investigating the Effects of Long-Term Sorption of Chlorinated Volatile Organic Compounds into Sandy Soils on the Difficulty of Desorption. In: Journal of Environmental Engineering (ASCE), v. 150, n. 2 (Februar 2024).
- (2023): Investigation of mechanical properties and acoustic emission of travertine: A case study in Jiuzhaigou, Southwestern China. In: Journal of Building Engineering, v. 72 (August 2023).
- (2023): Fire Resistance Test and Numerical Simulation on the Tube Structure of Steel–Concrete–Steel Immersed Tube Tunnel. In: Buildings, v. 13, n. 1 (13 Januar 2023).
- (2022): Improved endurance time analysis for seismic responses of concrete dam under near-fault pulse-like ground motions. In: Engineering Structures, v. 270 (November 2022).
- (2022): Experimental Study on Bearing Capacity of Normal- and High-Strength Steel Screw Anchors. In: Advances in Civil Engineering, v. 2022 (Januar 2022).
- (2021): Fabrication of MoS2-based environment friendly modifier via tannic acid assisted diethylenetriamine co-deposition for the preparation of composite SBS modified asphalt. In: Construction and Building Materials, v. 285 (Mai 2021).
- (2022): Experimental investigation of the influence of sequential water-rock reactions on the mineral alterations and porosity evolution of shale. In: Construction and Building Materials, v. 317 (Januar 2022).
- (2021): A facile approach for large-scale recovery of phosphogypsum: An insight from its performance. In: Construction and Building Materials, v. 309 (November 2021).
- (2014): Improved Operational Performance Assessment for Two-Lane Highway Facilities. In: Journal of Transportation Engineering, v. 140, n. 6 (Juni 2014).
- (2021): Fast deposition of Fe3+ chelated tannic acid network via salt induction over graphene oxide based SBS modified asphalt. In: Construction and Building Materials, v. 307 (November 2021).
- (2021): Fabrication of IPDI-LDHs/SBS modified asphalt with enhanced thermal aging and UV aging resistance. In: Construction and Building Materials, v. 302 (Oktober 2021).
- (2021): A Hybrid Method to Obtain the Wheel–Rail Contact Point at Extreme Positions. In: International Journal of Structural Stability and Dynamics, v. 21, n. 14 (Oktober 2021).
- (2021): The influence of reinforcement strengthening on seismic response and index correlation for high arch dams by endurance time analysis method. In: Structures, v. 32 (August 2021).
- (2016): Impacts of Chinese Urbanization on Farmers’ Social Networks: Evidence from the Urbanization Led by Farmland Requisition in Shanghai. In: Journal of Urban Planning and Development, v. 142, n. 2 (Juni 2016).
- (2019): Intra-urban excessive alcohol drinking: Geographic disparities, associated neighborhood characteristics and implications for healthy city planning. In: Sustainable Cities and Society, v. 46 (April 2019).
- (2020): Experimental research on a solar air-source heat pump system with phase change energy storage. In: Energy and Buildings, v. 228 (Dezember 2020).
- (2017): Impact responses of sandwich panels with fibre metal laminate skins and aluminium foam core. In: Composite Structures, v. 182 (Dezember 2017).
- (2020): Investigation of Stochastic Seismic Response and Index Correlation of an Arch Dam Using Endurance Time Analysis Method. In: Advances in Civil Engineering, v. 2020 (Januar 2020).
- (2020): Fabrication and performance evaluation of aminopropyl triethoxysilane-dopamine-MoS2 incorporated SBS modified asphalt. In: Construction and Building Materials, v. 265 (Dezember 2020).
- (2020): Fatigue performance of an innovative shallow-buried modular bridge expansion joint. In: Engineering Structures, v. 221 (Oktober 2020).
- (2020): Exploration on Damage Mechanism and Equivalent Damage Model of High Arch Dams under Earthquakes. In: KSCE Journal of Civil Engineering, v. 24, n. 4 (März 2020).
- (2020): Fabrication and application of polyurea formaldehyde-bioasphalt microcapsules as a secondary modifier for the preparation of high self-healing rate SBS modified asphalt. In: Construction and Building Materials, v. 246 (Juni 2020).
- (2019): Fabrication and properties of wide temperature domain pavement seaweed modified bio-bitumen. In: Construction and Building Materials, v. 227 (Dezember 2019).
- (2018): Experimental study of two-way post-tensioned flat slabs in fire. In: Journal of Structural Fire Engineering, v. 9, n. 3 (September 2018).
- (2014): Fatigue of girth butt weld for cast steel node connection in tower structure under wave loadings. In: The Structural Design of Tall and Special Buildings, v. 23, n. 15 (25 Oktober 2014).
Structurae kooperiert mit
